| Author |
Message |
TheOtherLeft
Joined: Sun Aug 27, 2006 11:30 pm Posts: 818 Location: Sydney
|
 Posted: Fri Mar 23, 2012 5:25 pm |
|
|
Hiya all,
I'm servicing my wife's Mirage brakes and am curious as to what type/brand of grease is recommended for the brake caliper pin and the back of the pad? On the back of the old pad there's copper grease but the caliper pin is looking rather dry.
In my GV there's no requirement for grease on either the pin or pad so am not sure what to use.
Thanks, Ben
_________________ 2002 SWB GV
Lifted and Locked
|
|
|
|
 |
Scrawny

I live here!
Joined: Tue Jan 29, 2008 10:30 pm Posts: 10528 Location: Brissie
Vehicle: Popemobile
|
 Posted: Fri Mar 23, 2012 6:54 pm |
|
|
All caliper pins need grease. I usually use a moly grease
|
|
|
|
 |
fordem
Joined: Mon Apr 19, 2010 11:30 pm Posts: 2656 Location: Georgetown, Guyana
Vehicle: APK416, A6G415, A6N415
|
 Posted: Sat Mar 24, 2012 4:18 am |
|
I use Permatex Ultra Disc Brake Caliper Lube synthetic lube on the slide pins  and Permatex Disc Brake Quiet on the back of the pads  The disc brake quiet is also available in a two pouch blister pack that's enough to do both calipers if you don't want to buy a can.
|
|
|
|
 |
twitchy
Joined: Fri Jul 25, 2008 11:30 pm Posts: 1086 Location: Lightning Ridge
Vehicle: 1999 Jimny
|
 Posted: Sat Mar 24, 2012 6:39 am |
|
Be careful because Scrawn uses grease on the front of his pads too  ......bahahahaha.
|
|
|
|
 |
Scrawny

I live here!
Joined: Tue Jan 29, 2008 10:30 pm Posts: 10528 Location: Brissie
Vehicle: Popemobile
|
 Posted: Sat Mar 24, 2012 8:23 am |
|
twitchy wrote: Be careful because Scrawn uses grease on the front of his pads too  ......bahahahaha. Brakes only slow you down 
|
|
|
|
 |
TheOtherLeft
Joined: Sun Aug 27, 2006 11:30 pm Posts: 818 Location: Sydney
|
 Posted: Sat Mar 24, 2012 11:35 am |
|
fordem wrote: I use Permatex Ultra Disc Brake Caliper Lube synthetic lube on the slide pins  and Permatex Disc Brake Quiet on the back of the pads  The disc brake quiet is also available in a two pouch blister pack that's enough to do both calipers if you don't want to buy a can. I was about to buy the green permatex brake lube but I've read a few reviews about it swelling some rubbers in contact with the caliper pin. Mostly with Mitsu's and Toyotas. I was going to try the CRC equivalent as there's less reported problems. Has anyone used the CRC products with success? Was going to use copper grease on the rear of the pads.
_________________ 2002 SWB GV
Lifted and Locked
|
|
|
|
 |
fordem
Joined: Mon Apr 19, 2010 11:30 pm Posts: 2656 Location: Georgetown, Guyana
Vehicle: APK416, A6G415, A6N415
|
 Posted: Sat Mar 24, 2012 11:40 am |
|
|
Let's just say in five years I've had no problems - package says it's safe for use on rubber.
|
|
|
|
 |
TheOtherLeft
Joined: Sun Aug 27, 2006 11:30 pm Posts: 818 Location: Sydney
|
 Posted: Sat Mar 24, 2012 1:27 pm |
|
fordem wrote: Let's just say in five years I've had no problems - package says it's safe for use on rubber. What other cars have you used them on? Any Mitsu's or Toyotas?
_________________ 2002 SWB GV
Lifted and Locked
|
|
|
|
 |
atari4x4

az supporter
Joined: Mon Dec 11, 2006 10:30 pm Posts: 34842 Location: East Radelayed
Vehicle: SV420+SV620 Vitara's
|
 Posted: Sat Mar 24, 2012 1:49 pm |
|
|
i use a smear of castrol rubber grease (red) on the caliper pins
_________________ You're just hating because you don't understand
|
|
|
|
 |
fordem
Joined: Mon Apr 19, 2010 11:30 pm Posts: 2656 Location: Georgetown, Guyana
Vehicle: APK416, A6G415, A6N415
|
 Posted: Sun Mar 25, 2012 2:49 am |
|
TheOtherLeft wrote: What other cars have you used them on? Any Mitsu's or Toyotas? Yup & yup - a Pajero & a Corolla.
|
|
|
|
 |
|