auszookers.com • View topic - 1litre to 1.3 diffs Nt

Board index » Talking About Stuff » Suzuki Talk

1litre to 1.3 diffs Nt

Page 1 of 1

[ 8 posts ]

Print view

Previous topic | Next topic

Author

Message

norcorider

Joined: Thu Jul 15, 2010 9:44 am
Posts: 97
Location: Strathalbyn SA
Vehicle: 30s 2inch shackles sierra

Posted: Mon Mar 26, 2012 2:25 pm

hey all
im thinking about changing my diffs over for my coming engine conversion, im not sure how the old 1.0 litre diffs will cope.
going to be either running a ca18de or g16b.

from my experience, when we did it to my mates it all bolted in except the shafts where not the correct lengths anymore, so is there anyway to get away with putting them in with out getting custom front and rear tail shafts? or are the 1litre diffs fine with that sort of power increase?

Cheers

Last edited by norcorider on Mon Mar 26, 2012 2:27 pm, edited 1 time in total.

want33s

az supporter

Joined: Fri Nov 16, 2007 10:30 pm
Posts: 8134
Location: Sunshine Coast Qld

Posted: Mon Mar 26, 2012 2:27 pm

If your 1.0 transfer has a 4wd switch you can fit NT 1.3 flanges to it and then run stock NT 1.3 shafts.

norcorider

Joined: Thu Jul 15, 2010 9:44 am
Posts: 97
Location: Strathalbyn SA
Vehicle: 30s 2inch shackles sierra

Posted: Mon Mar 26, 2012 2:29 pm

yeh got switch light, but forgot to say i have a lwb so is it hard to source 1.3 lwb shafts
cheers

want33s

az supporter

Joined: Fri Nov 16, 2007 10:30 pm
Posts: 8134
Location: Sunshine Coast Qld

Posted: Mon Mar 26, 2012 2:30 pm

norcorider wrote:

yeh got switch light, but forgot to say i have a lwb so is it hard to source 1.3 lwb shafts
cheers

I have a few NT 1.3 front shafts here.
I can sell you two... one for the front and one to take to a shop to get lengthened.

zookz

az supporter

Joined: Wed Mar 30, 2011 2:38 am
Posts: 80
Location: South West
Vehicle: Vitara G16b , Sierra G16b

Posted: Mon Mar 26, 2012 2:57 pm

want33s wrote:

If your 1.0 transfer has a 4wd switch you can fit NT 1.3 flanges to it and then run stock NT 1.3 shafts.

Are you sure? I tried doing this and they wouldn't fit. I had to change the yokes to 1.0 instead. Maybe I have some random 1.0 transfer with 4wd switch.
Could be just WT flanges fit unless someone can confirm 1.3 NT and 1.3 WT flanges are identical...

want33s

az supporter

Joined: Fri Nov 16, 2007 10:30 pm
Posts: 8134
Location: Sunshine Coast Qld

Posted: Mon Mar 26, 2012 3:40 pm

zookz wrote:

want33s wrote:

If your 1.0 transfer has a 4wd switch you can fit NT 1.3 flanges to it and then run stock NT 1.3 shafts.

You had me thinking I stuffed up for a second but the flanges must be interchangeable between all 3 switched cases (1.0, 1.3NT & 1.3WT) because they all take the same aftermarket gearsets and shafts...

norcorider

Joined: Thu Jul 15, 2010 9:44 am
Posts: 97
Location: Strathalbyn SA
Vehicle: 30s 2inch shackles sierra

Posted: Mon Mar 26, 2012 3:42 pm

so the front length will be fine? its just the rear that will need to be lengthened?

want33s

az supporter

Joined: Fri Nov 16, 2007 10:30 pm
Posts: 8134
Location: Sunshine Coast Qld

Posted: Mon Mar 26, 2012 3:44 pm

norcorider wrote:

so the front length will be fine? its just the rear that will need to be lengthened?

Yep.

Page 1 of 1

[ 8 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: Google [Bot] and 841 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum