[Sneakyzook]

Just stopped. no flickers or nothing, cold dead

Anyone take a guess, points will be awarded for a correct answer once ive done the research.

SZ

[royce]

take it the odo has stoped counting too?

step one, make sure the cable is still in the transfer

step 2, undo cable from transfer and flick it round by hand while smebdy watches to see if the needle flicks, if so its in the transfer

if not

step 3, slide the inner cable out, should be square on the speedo end , if not its striped or snapped

alternate step 3, reach up under the ash and undo the cable and pull it down, it houldnt turn by hand if so cable prob snapped (this is hard to do though)

[Sneakyzook]

Thanks mate will do!!

Cables still connected to the tranfer, rest will have to be done on the WE as im haven a few