[wagn8u]

Hay guys,

As ive mentioned earlier, im new to sierras but am considering completeing a RUF on my 85 drover. Just wondering if anyone can give me some reccomendations for springs, i want to lift it about 2 inches in the process

[Gwagensteve]

Stock rear springs will provide 2" of lift when used in the front. If you want more travel than stock springs provide, then you need to play with a "lifted" rear pack. The challenge is getting the right balance of height with enough spring rate to avoid excessive axle wrap. That's a different answer for everyone as tyres, lockers, gearing and terrain affect axle wrap as much as anything.
Steve.

[SierraDan]

Depends on how you do it. If i had stock rear springs in the front of mine i'd lose my lift.

[Moph]

There's a bit of a writeup in my build thread about RUF and spring lengths ... just what I found when playing with mine. Click my sig link.

[twitchy]

When I was doing the Frankenrolla ( should of finished it) I was going to use corolla leaf springs in the rear. so RUF & Rolla possibly?!?