auszookers.com • View topic - rear wheel bearing

Board index » Talking About Stuff » Suzuki Talk

rear wheel bearing

Page 1 of 1

[ 13 posts ]

Print view

Previous topic | Next topic

Author

Message

Damo

az supporter

Joined: Sat Jul 22, 2006 11:30 pm
Posts: 4661
Location: Brisbane

Posted: Tue Apr 14, 2009 2:18 pm

This is a really bad pic (sorry!) of the stock axle shaft and bearing sans backing plate. See how the bearing sits proud of the diff housing flange? Is that normal? I think it is, there seems to be a bit of a recess in the stock backing plate to allow for that, I just want to be sure that's all.

You do not have the required permissions to view the files attached to this post.

_________________
SJ50.4.LYF

Last edited by Damo on Tue Apr 14, 2009 2:30 pm, edited 1 time in total.

steve

I live here!

Joined: Sun Jun 11, 2006 11:30 pm
Posts: 7681
Location: Brisbane
Vehicle: 75 Cruiser

Posted: Tue Apr 14, 2009 2:28 pm

the pic is a bit faint (not there at all?)

yeah the bearing sits out a bit i seem to remember

Damo

az supporter

Joined: Sat Jul 22, 2006 11:30 pm
Posts: 4661
Location: Brisbane

Posted: Tue Apr 14, 2009 2:31 pm

Oops, pic was a bit big, haad to resize it.

_________________
SJ50.4.LYF

Scrawny

I live here!

Joined: Tue Jan 29, 2008 10:30 pm
Posts: 10528
Location: Brissie
Vehicle: Popemobile

Posted: Tue Apr 14, 2009 2:33 pm

Yeah, pretty sure they sit slightly proud

Damo

az supporter

Joined: Sat Jul 22, 2006 11:30 pm
Posts: 4661
Location: Brisbane

Posted: Tue Apr 14, 2009 2:37 pm

I should probably measure the thickness of the bearing and the depth of the housing where the bearing sits. I assume the bearing sits all the way down onto the seat in the bottom of that recess.

_________________
SJ50.4.LYF

Scrawny

I live here!

Joined: Tue Jan 29, 2008 10:30 pm
Posts: 10528
Location: Brissie
Vehicle: Popemobile

Posted: Tue Apr 14, 2009 2:43 pm

Yeah, it should bottom out on that lip.

Zook_Fan

az supporter

Joined: Thu Mar 13, 2008 10:30 pm
Posts: 4530
Location: Toowoomba
Vehicle: Maruti and LJ80's

Posted: Tue Apr 14, 2009 2:46 pm

both my rears had this

Damo

az supporter

Joined: Sat Jul 22, 2006 11:30 pm
Posts: 4661
Location: Brisbane

Posted: Tue Apr 14, 2009 4:42 pm

Made some measurements.

The depth of the recess in the housing is 14mm, width of the bearing is 17mm, so the outer edge of the bearing should side proud of the flange by 3mm.

_________________
SJ50.4.LYF

joeblow

Joined: Sat May 10, 2008 11:30 pm
Posts: 3273
Location: melbourne

Posted: Tue Apr 14, 2009 5:25 pm

yes thats normal damo. had some more plates cut ans will be in the mail this week.

_________________
builder of custom road legal zooks......and stuff.

Damo

az supporter

Joined: Sat Jul 22, 2006 11:30 pm
Posts: 4661
Location: Brisbane

Posted: Tue Apr 14, 2009 5:29 pm

joeblow wrote:

yes thats normal damo. had some more plates cut ans will be in the mail this week.

Was having kittens, though I had a stuffed housing or something!!!

Thanks Joe, should be able to get this baby back together soon!

_________________
SJ50.4.LYF

lump_a_charcoal

az supporter

Joined: Wed Feb 28, 2007 10:30 pm
Posts: 4454
Location: Botany, NSW
Vehicle: MY2019 Jimny

Posted: Tue Apr 14, 2009 9:17 pm

Just get a big hammer and wail on it until it is flush!

brendan

Joined: Sun Jul 27, 2008 11:30 pm
Posts: 1484
Location: Sydney

Posted: Tue Apr 14, 2009 9:22 pm

lump_a_charcoal wrote:

Just get a big hammer and wail on it until it is flush!

BFH fixes eveything

_________________
navara on 33s. hopfully rear air locker soon

Damo

az supporter

Joined: Sat Jul 22, 2006 11:30 pm
Posts: 4661
Location: Brisbane

Posted: Tue Apr 14, 2009 11:26 pm

Well that's what I was going to do, but it's lucky i didnt huh :wink:

_________________
SJ50.4.LYF

Page 1 of 1

[ 13 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: Google [Bot] and 21 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum