auszookers.com • View topic - Sierra arb winch bar?

Board index » Talking About Stuff » Suzuki Talk

Sierra arb winch bar?

Page 1 of 1

[ 12 posts ]

Print view

Previous topic | Next topic

Author

Message

captainattractive

Joined: Fri Dec 24, 2010 6:42 am
Posts: 104
Location: Mooroolbark, Vic
Vehicle: 91 SWB Softie Sierra

Posted: Fri Jun 22, 2012 2:42 pm

Hi all, just picked up a arb bar led to beleve it would fit my car, 91' swb wt Sierra. But from looking at the mounts I'm thinking otherwise... Please let me know what you think?

-Michael

You do not have the required permissions to view the files attached to this post.

zooky08

az supporter

Joined: Fri Nov 27, 2009 10:30 pm
Posts: 3426
Location: imbil/gympie. qld
Vehicle: 03 Jimny

Posted: Fri Jun 22, 2012 3:03 pm

Doesn't appear to look like a sierra one. The wings on yours seem to be tapere around the front clip. some thing like a coily front clip.
chassis mounts is different as well. Could suit a body lift

_________________
03 Jimny 30 km2s 75mm lift f&r locked winch

Reubs

Joined: Wed Sep 09, 2009 11:30 pm
Posts: 1522
Location: Brisbane
Vehicle: SJ80, SE416

Posted: Fri Jun 22, 2012 3:14 pm

It's definitely not for a Sierra of any description. My guess is it's Vitara.

Note - just a guess though - I haven't removed my Vit's ARB bar to confirm.

SWB or LWB (they are different) i couldn't tell you but the side slotted holes and spot at the bottom for a u-bolt looks similar to Vit bullbars...

captainattractive

Joined: Fri Dec 24, 2010 6:42 am
Posts: 104
Location: Mooroolbark, Vic
Vehicle: 91 SWB Softie Sierra

Posted: Fri Jun 22, 2012 3:26 pm

All is good, thanks for all the replys, managed to find the part number and 2 places said it was for a vitara up to 96' 2 door only. Can't always trust what what they say on eBay...

abclarke

Joined: Mon Feb 14, 2011 8:19 am
Posts: 1966
Location: Couridjah
Vehicle: 1985 Holden Drover

Posted: Fri Jun 22, 2012 6:10 pm

Grinder it!

_________________
1989 WT Sierra.

captainattractive

Joined: Fri Dec 24, 2010 6:42 am
Posts: 104
Location: Mooroolbark, Vic
Vehicle: 91 SWB Softie Sierra

Posted: Fri Jun 22, 2012 6:48 pm

Haha I'm not THAT handy with a welder

atari4x4

az supporter

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34843
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Posted: Fri Jun 22, 2012 6:53 pm

re advertise it correctly on here, someone will buy it!

_________________
You're just hating because you don't understand

captainattractive

Joined: Fri Dec 24, 2010 6:42 am
Posts: 104
Location: Mooroolbark, Vic
Vehicle: 91 SWB Softie Sierra

Posted: Fri Jun 22, 2012 7:06 pm

I was thinking that, but I got it off eBay and told him his ad was wrong. And didn't pay.
He'll be putting it up again correctly, so keep a look out for it if your interested...

atari4x4

az supporter

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34843
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Posted: Fri Jun 22, 2012 7:20 pm

captainattractive wrote:

I was thinking that, but I got it off eBay and told him his ad was wrong. And didn't pay.
He'll be putting it up again correctly, so keep a look out for it if your interested...

oh, so when you wrote this... you "actually" hadn't picked it up. :lol:

captainattractive wrote:

Hi all, just picked up a arb bar led to beleve it would fit my car, 91' swb wt Sierra. But from looking at the mounts I'm thinking otherwise... Please let me know what you think?

-Michael

_________________
You're just hating because you don't understand

captainattractive

Joined: Fri Dec 24, 2010 6:42 am
Posts: 104
Location: Mooroolbark, Vic
Vehicle: 91 SWB Softie Sierra

Posted: Fri Jun 22, 2012 7:33 pm

Haha it was in the car, and I just thought I'd double check before I went off. I was sitting there for about an hour double checking

jono165

az supporter

Joined: Thu May 27, 2010 12:01 pm
Posts: 834
Location: Melbourne

Posted: Fri Jun 22, 2012 8:04 pm

That bar looks like an ARB Bar to Suit a 1.6ltr SWB Vitara. The diagonal bolts holes on the inside bolt to the existing bumper mounts. The lower part with the semi circle cut out of it has a u-bolt that goes around the front chassis crossmember on a SWB 1.6 Vit

captainattractive

Joined: Fri Dec 24, 2010 6:42 am
Posts: 104
Location: Mooroolbark, Vic
Vehicle: 91 SWB Softie Sierra

Posted: Fri Jun 22, 2012 9:05 pm

jono165 wrote:

Spot on mate, shame it didn't suit my Sierra

Page 1 of 1

[ 12 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: Google [Bot] and 247 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum