| Author |
Message |
zook_demon
Joined: Sun Mar 15, 2009 10:30 pm Posts: 20 Location: QLD
|
 Posted: Fri Apr 24, 2009 12:21 am |
|
|
was just bleeding the brakes wen i noticed fluid dripping from the bottom of one of my rear drum brakes. took the wheel off and all other bolts and screws off but the brake still wont come off. please help
|
|
|
|
 |
Mike

lesspostingmorewheeling
Joined: Tue May 06, 2008 11:30 pm Posts: 2236 Location: Under Down Under
|
 Posted: Fri Apr 24, 2009 12:34 am |
|
|
spray some wd40 around the centre hole in the brake drum then hit it with the biggest hammer you can find
_________________ [quote="Fluffy"] yeah right mate like Im gunna mov
|
|
|
|
 |
Zook_Fan

az supporter
Joined: Thu Mar 13, 2008 10:30 pm Posts: 4530 Location: Toowoomba
Vehicle: Maruti and LJ80's
|
 Posted: Fri Apr 24, 2009 12:41 am |
|
|
another way is to spray it with wd40 and hit it with a rubber hammer around the edges until it gains a bit of play in it. once you have this play smack the centre in a rotational pattern and eventually it will fall off. nothing will be damaged by a rubber hammer
|
|
|
|
 |
joeblow
Joined: Sat May 10, 2008 11:30 pm Posts: 3273 Location: melbourne
|
 Posted: Fri Apr 24, 2009 1:10 am |
|
|
slide hammer.
_________________ builder of custom road legal zooks......and stuff.
|
|
|
|
 |
zook_demon
Joined: Sun Mar 15, 2009 10:30 pm Posts: 20 Location: QLD
|
 Posted: Fri Apr 24, 2009 1:18 am |
|
|
sweet
thanks heaps
i got it off
but the shoe is shreaded
no were i can get a new on
supercheap stock them?
|
|
|
|
 |
Zook_Fan

az supporter
Joined: Thu Mar 13, 2008 10:30 pm Posts: 4530 Location: Toowoomba
Vehicle: Maruti and LJ80's
|
 Posted: Fri Apr 24, 2009 1:19 am |
|
|
yeah supercheap should have them, i got mine from repco
|
|
|
|
 |
Mike

lesspostingmorewheeling
Joined: Tue May 06, 2008 11:30 pm Posts: 2236 Location: Under Down Under
|
 Posted: Fri Apr 24, 2009 1:21 am |
|
|
i've never seen them at supercheap
try repco but take your old ones in so they can match them for you
_________________ [quote="Fluffy"] yeah right mate like Im gunna mov
|
|
|
|
 |
royce

omnipotent being
Joined: Sun Jun 11, 2006 11:30 pm Posts: 17216 Location: Pluto
|
 Posted: Fri Apr 24, 2009 1:21 am |
|
|
take a pair of your with you cause there are a few types
I always leave the wheel bolted to the drum to pull em off
|
|
|
|
 |
zook_demon
Joined: Sun Mar 15, 2009 10:30 pm Posts: 20 Location: QLD
|
 Posted: Fri Apr 24, 2009 3:58 am |
|
|
ok
i will get some tomorrow
thanx heaps for all ur help
")
|
|
|
|
 |
bitingmidge
Joined: Thu Feb 12, 2009 10:30 pm Posts: 65 Location: Sunshine Coast
Vehicle: Grand Vitara
|
 Posted: Fri Apr 24, 2009 11:39 am |
|
Mike wrote: spray some wd40 around then hit it with the biggest hammer you can find
That's pretty much my approach to fixing anything I have to say.
Cheers,
P
_________________ [url=http://sunshinecoastdaily.blogspot.com/] Suns
|
|
|
|
 |
meads02
Joined: Thu Oct 16, 2008 10:30 pm Posts: 44 Location: narangba
|
 Posted: Fri Apr 24, 2009 8:16 pm |
|
|
I use the wheel bolted on with two or three nuts threaded on a little bit. Sort of like a slide hammer
|
|
|
|
 |
|