[lauby]

The following parts were compiled with the intention of finding a clean LWB and modding it, i have changed my mind so selling some of the part pile;

A set of 4 WT metal flares with the standard brackets and rubber trim, used; $150,



Powder coat alum fishing rod holder thingy, bought yonks ago and never used it $20;





A set of WT axles wheel stud to wheel stud, came of an 89 model, pulled apart to weld a set of TSOR perches at NT spacing which was done by the man himself in the Fatcave on his jig, deconstruction process was meticulously numbered and bagged to help me rebuild, new axle seals as shown included, one of the front bearings had collapsed, check the last 3 pictures for more detail on this hub, handbrake cable to suit included, $old.









Images of collapsed bearing / stub, before i pulled it all apart;







4 speed Maruti gearbox from a 94 model, in working condition, I bought it as a spare to do the 5 speed change when I had my Maruti, $150;







Maruti cab and roof, 2 pieces only as shown, $old







Sierra LWB cage as shown, $80, and the stainless steel bars which run down the top edge of a lwb tub, $40, will get more pics if there’s any interest;







Also have a WT Hayman Reece towbar, $old and a NT towbar, no name brand for $free to good home,

Parts are located on the gold coast, cheers.

[Fast50]

Where abouts are ya?

[Fatzook]

Fast50 wrote:

Where abouts are ya?

Gold coast.

[whincup]

the hayman reece towbar, wouldnt know if it fits the WT maruti's at all would you? trayback, but dont think that makes a difference...

[lauby]

whincup wrote:

the hayman reece towbar, wouldnt know if it fits the WT maruti's at all would you? trayback, but dont think that makes a difference...

can't help therem cannot confirm if either will fit a Maruti,

i can do pictures though;

The NT towbar; ( of an 85 NT sierra )





The Hayman Reece WT towbar; ( of a 91 WT sierra )

[jim_dover]

PM'ED

[atari4x4]

cab section is priced to sell GLWS

[shlonga86]

will the WT tow bar fit a coily?

I'm interested if whincup isn't

[Blkfxx]

Too bad you aren't nearby, I'd grab those diffs.

[atari4x4]

Blkfxx wrote:

Too bad you aren't nearby, I'd grab those diffs.

www.e-go.com

[lauby]

shlonga86 wrote:

will the WT tow bar fit a coily?

I'm interested if whincup isn't

wt towbar still available.

Re fitting a coily, only found this thread which confirms it as maybe.

[whincup]

shlonga86 wrote:

will the WT tow bar fit a coily?

I'm interested if whincup isn't

nah sorry forgot about this, i saw "hayman reece" and assumed those square hitch type. wouldnt fit mine anyway without modification.

[Fatzook]

whincup wrote:

shlonga86 wrote:

will the WT tow bar fit a coily?

I'm interested if whincup isn't

nah sorry forgot about this, i saw "hayman reece" and assumed those square hitch type. wouldnt fit mine anyway without modification.

hayman reece never made a square hitch type for the sierra.

[shep]

Fatzook wrote:

whincup wrote:

shlonga86 wrote:

will the WT tow bar fit a coily?

I'm interested if whincup isn't

nah sorry forgot about this, i saw "hayman reece" and assumed those square hitch type. wouldnt fit mine anyway without modification.

hayman reece never made a square hitch type for the sierra.

I have a square hitch jobbie had to buy it from seppo land

[nicko27]

Hi mate

Have you still got the wt diffs with nt Perches?

Can i have your number

Thanks Nick

[lauby]

nicko27 wrote:

Hi mate

Have you still got the wt diffs with nt Perches?

Thanks Nick

Yep, diffs are still available, check your mail box for message.

I'm doing a run up to Brisbane this week end so can meet some where on the way to save you the drive down