| Author |
Message |
nicktoozoff
Joined: Sat Apr 30, 2011 4:01 am Posts: 25 Location: Moruya NSW
|
 Posted: Sat Jul 21, 2012 10:31 am |
|
|
Hi all,
I have a 94 LWB Vitara. While cornering to the left only, the hand brake warning light comes on under cornering loads. Never to the right. I would appear to be when fluids of some sort move away from a sensor, but I cant work out which ones!! Does anyone have any experience with this or any ideas where I can start looking?!!
Cheers Nick.
|
|
|
|
 |
rustyzook
Joined: Tue Jul 29, 2008 11:30 pm Posts: 1092 Location: Tamworth- central coast
Vehicle: sierra
|
 Posted: Sat Jul 21, 2012 11:00 am |
|
|
|
 |
atari4x4

az supporter
Joined: Mon Dec 11, 2006 10:30 pm Posts: 34842 Location: East Radelayed
Vehicle: SV420+SV620 Vitara's
|
 Posted: Sat Jul 21, 2012 11:01 am |
|
rustyzook wrote: brake master cylinder. ^^^ this it's a low fluid warning.
_________________ You're just hating because you don't understand
|
|
|
|
 |
Rossco
Joined: Fri May 28, 2010 10:28 am Posts: 529 Location: Townsville, QLD
Vehicle: 91 WT 1.6EFI
|
 Posted: Sat Jul 21, 2012 11:02 am |
|
|
Have you checked the brake fluid? It it's low it would set the sensor off when cornering
|
|
|
|
 |
nicktoozoff
Joined: Sat Apr 30, 2011 4:01 am Posts: 25 Location: Moruya NSW
|
 Posted: Sat Jul 21, 2012 12:00 pm |
|
|
Thnx guys. I will look into that.
|
|
|
|
 |
SuziBlu
Joined: Mon Sep 14, 2009 11:30 pm Posts: 4268 Location: Eyre Peninsula
|
 Posted: Sat Jul 21, 2012 2:25 pm |
|
nicktoozoff wrote: Hi all,
the hand brake warning light comes on under cornering loads. Cheers Nick. Does the Vitara use fluid in the hand brake ?? Sounds like its just a crappy switch.
_________________ Bad decisions make good stories.
|
|
|
|
 |
rustyzook
Joined: Tue Jul 29, 2008 11:30 pm Posts: 1092 Location: Tamworth- central coast
Vehicle: sierra
|
 Posted: Sat Jul 21, 2012 2:33 pm |
|
|
the same light came on in the mrs vit when the fluid was low, same with sierra, the park light stays on
|
|
|
|
 |
atari4x4

az supporter
Joined: Mon Dec 11, 2006 10:30 pm Posts: 34842 Location: East Radelayed
Vehicle: SV420+SV620 Vitara's
|
 Posted: Sat Jul 21, 2012 2:33 pm |
|
SuziBlu wrote: nicktoozoff wrote: Hi all,
the hand brake warning light comes on under cornering loads. Cheers Nick. Does the Vitara use fluid in the hand brake ?? Sounds like its just a crappy switch. no but it uses the handbrake warning light as a low brake fluid level warning.  if it was a french build shitbox, i'd believe it if it was a fluid powered handbrake... checked the oil on the C4 Citroen i'm driving & the dipstick is literally a piece of wire with a pissy plastic handle & a plastic end on it with the E & F marks on it.
_________________ You're just hating because you don't understand
|
|
|
|
 |
want33s

az supporter
Joined: Fri Nov 16, 2007 10:30 pm Posts: 8134 Location: Sunshine Coast Qld
|
 Posted: Sat Jul 21, 2012 4:53 pm |
|
|
Lots of cars/trucks use a wire dipstick because of the convoluted path they take from the top to the sump. Normal flat steel only bends in one plain.
|
|
|
|
 |
nicktoozoff
Joined: Sat Apr 30, 2011 4:01 am Posts: 25 Location: Moruya NSW
|
 Posted: Sun Jul 22, 2012 1:57 pm |
|
|
Yeah the master brake cylinder was way low on brake fluid. Topped up, no more warning light!! Thnx guys!!
|
|
|
|
 |
ball

I live here!
Joined: Wed Oct 22, 2008 10:30 pm Posts: 4673 Location: Katherine
|
 Posted: Sun Jul 22, 2012 2:17 pm |
|
nicktoozoff wrote: Yeah the master brake cylinder was way low on brake fluid. Topped up, no more warning light!! Thnx guys!! now you need to find the leak that caused the low fluid level.
|
|
|
|
 |
|