| Author |
Message |
Shansh

az supporter
Joined: Sun May 23, 2010 9:35 am Posts: 1816 Location: Goulburn NSW
Vehicle: Ducati Monster
|
 Posted: Sat Aug 04, 2012 7:59 pm |
|
i searched and found that stock vit rims are 25P offset & stock sierra are 15P http://auszookers.com/forum/viewtopic.p ... edy+offsetso am i right in thinking that sierra rims on a vit would actually be a -10 offest? the reason im asking is we are driving a vit in the shitbox rally & are thinking of taking two or three of my stock sierra rims as spares, even if we just used em on the back wheels & if we got a flat on the front do a switch with a rear then chuck a sierra one on the back or am i totally thinking the wrong way here?
|
|
|
|
 |
christover1

az supporter
Joined: Tue Jul 15, 2008 11:30 pm Posts: 8203 Location: Melbourne
Vehicle: Pajero 91 NH 3.0 SWB
|
 Posted: Sat Aug 04, 2012 8:17 pm |
|
|
Sierra rims on a Vitara w3ill stick out 10mm more. Many people use Sierra rims on Vits to get 30's on .
I'm assuming its an early Vit, as later have a different stud pattern
|
|
|
|
 |
303zuke

az supporter
Joined: Wed Aug 19, 2009 11:30 pm Posts: 2447
Vehicle: LJ50V, SJ70
|
 Posted: Sat Aug 04, 2012 8:25 pm |
|
christover1 wrote: I'm assuming its an early Vit, as later have a different stud pattern ALL Vitaras have the same stud pattern as a Sierra. Early Grand Vitaras also have the same, but it is only the 2006-on GV that has a different stud pattern to other Suzuki 4wds. But then again, the 2006-on GV shares almost nothing in common with any earlier Suzuki.
|
|
|
|
 |
Shansh

az supporter
Joined: Sun May 23, 2010 9:35 am Posts: 1816 Location: Goulburn NSW
Vehicle: Ducati Monster
|
 Posted: Sat Aug 04, 2012 8:36 pm |
|
|
cool cheers guys, we will use my sierra rims as spares then
|
|
|
|
 |
atari4x4

az supporter
Joined: Mon Dec 11, 2006 10:30 pm Posts: 34842 Location: East Radelayed
Vehicle: SV420+SV620 Vitara's
|
 Posted: Sat Aug 04, 2012 8:42 pm |
|
|
2 or 3 spares in the back of a swb Vit, you're bloody mad... IMO. where is all your other crap going to go?
i'd look at carrying an extra spare & get a good tyre plug kit.
_________________ You're just hating because you don't understand
|
|
|
|
 |
Shansh

az supporter
Joined: Sun May 23, 2010 9:35 am Posts: 1816 Location: Goulburn NSW
Vehicle: Ducati Monster
|
 Posted: Sat Aug 04, 2012 8:54 pm |
|
|
mate the only other crap we will have is my swag and two backpacks pretty much. my brother has one of those hikers tents that folds up to bugger all..........the organisers say we have to take two spares so it will be only one in the back & will take a tyre plug kit to cover any other punctures, top idea that.
and yeah i am bloody mad..............
|
|
|
|
 |
christover1

az supporter
Joined: Tue Jul 15, 2008 11:30 pm Posts: 8203 Location: Melbourne
Vehicle: Pajero 91 NH 3.0 SWB
|
 Posted: Sat Aug 04, 2012 9:04 pm |
|
Rip out the back seats, and use an old tuff fly screen door as a cargo barrier  )
|
|
|
|
 |
jdk81
Joined: Sat Jul 18, 2009 11:30 pm Posts: 2372 Location: Ballarat, VIC
|
 Posted: Sun Aug 05, 2012 7:36 am |
|
|
Make up a land rover style spare holder on the bonnet? (reinforce the bonnet to suit). Gives you two spares, without taking up valueable space in car.
Two spares, do they have to fit? A spare tyre, a good little air comp, plug kit, and maybe a tube would be ample
In old car races they were required to carry a spare tyre. My grandfather used to carry a bicycle wheel and tyre in the boot of his MG. As the rule didnt state the spare had to fit.
|
|
|
|
 |
zukenutter

az supporter
Joined: Sun Feb 08, 2009 10:30 pm Posts: 9045 Location: Brisneyland
Vehicle: 2006 Jimny JLX
|
 Posted: Sun Aug 05, 2012 8:06 am |
|
jdk81 wrote: In old car races they were required to carry a spare tyre. My grandfather used to carry a bicycle wheel and tyre in the boot of his MG. As the rule didnt state the spare had to fit. LOL... technicalities
_________________ Click WWW below for STICKERS
|
|
|
|
 |
Shansh

az supporter
Joined: Sun May 23, 2010 9:35 am Posts: 1816 Location: Goulburn NSW
Vehicle: Ducati Monster
|
 Posted: Sun Aug 05, 2012 8:28 am |
|
jdk81 wrote: Make up a land rover style spare holder on the bonnet? (reinforce the bonnet to suit). Gives you two spares, without taking up valueable space in car we were thinking something like this, also will be chucking a roof basket on for jerry cans and stuff, would prob get one up there too if the bonnet mount wasnt going to work due to sponsorship space being taken up, the shitbox rally & cancer council put their stuff all over the bonnet & front doors..............
|
|
|
|
 |
|