[tim80z]

I've decided to sell the M13A VVT motor recently removed from my 2006 Jimny. This motor had 53970kms on it when I swapped it for an M18A (more power ). Prior to removal the motor ran great and I never had any issues with it.

Currently fitted with a Liana sump, rocker cover, intake manifold and fuel rail. What you see in the pictures is what you get plus a few extras not currently fitted to the engine. Included but not fitted to engine is: clutch, spare water pump, power steering bracket, Liana crank pulley, and a cut Liana loom that may be useful as a source of spare connectors. The crank angle sensor fitted to this engine is dodgy as I needed to replace the sensor in my M18A (see http://auszookers.com/forum/viewtopic.php?f=5&t=37131).

This would be best suited to someone looking to replace their high kilometer or blown M13A VVT Jimny engine (2006+) as they will then have all the appropriate bolt-ons to make it work.

This engine is currently located in Parkes NSW (about an hour west of Orange and an hour south of Dubbo). Willing to freight, please contact me to discuss options.

Price is now $150.

Pics:




More pics further down.

- Tim.

[tim80z]

Make an offer.

I need this gone as I have no further use for it and the extra cash will help get me to Fraser in November.

- Tim.

[tim80z]

Price drop to $250.

I wonder whats its worth as scrap metal?

- Tim.

[Myles]

Will this fit into a 1999 model? )

[tim80z]

Myles wrote:

Will this fit into a 1999 model? )

No. The 1999 model uses a G13BB motor.

- Tim.

[tim80z]

This is now on eBay at $250 / make an offer. Happy to help with freight options, contact me to discuss.

http://cgi.ebay.com.au/ws/eBayISAPI.dll ... 0854372895

- Tim.

[tim80z]

Bump...

[tim80z]

Bump and price drop to $200.

- Tim.

[atari4x4]

fark that's cheap

[tim80z]

Seems like it doesn't matter how cheap I make it though, at the end of the day it's all supply and demand. In this case there's no demand.

- Tim.

[tim80z]

In the background of this pic there is a milk crate full of bits that came off the 1.8 that I'll include for free.



Some of the goodies include the intake manifold, fuel rail, crankshaft pulley, liana loom (main plug cut off but all sensor plugs still there), and more. If you're nice I'll even include the milk crate.

The only thing I won't inculde is the 1.8 throttle body as I am reserving that for future use.

- Tim.

[tim80z]

Bump.

- Tim.

[sooty]

pm sent

[tim80z]

pm replied

[kristov]

pmed

[tim80z]

pm replied

[tim80z]

Still got this, want it gone.

The crank angle sensor in this engine is dodgy as I needed to replace the sensor in my M18A (see http://auszookers.com/forum/viewtopic.php?f=5&t=37131).

Price dropped to $150 ono.

- Tim

[tim80z]

Bump.

- Tim.

[tim80z]

Engine is prepped and ready to freight out of here. Took a few new photos today including a few extras to show some of the stuff that comes with it.





Rocker cover off


Injectors


Clutch. Original clutch replaced as a caution while doing the engine swap


Spare water pump



Liana crank puley


Liana power steering bracket



Cut Liana loom. May be useful as a source of spare connectors.

[tim80z]

Now on eBay with a $50 starting bid.
www.ebay.com.au/itm/141000145839

- Tim.

[tim80z]

SOLD! to the highest bidder for the grand total of $50.

- Tim.

[atari4x4]

fark, someone got a bargain.

[tim80z]

I got $18 more than Squibby got for his...

- Tim.

[atari4x4]