auszookers.com • View topic - HOW DO I GET THE CRANK AND CAM PULLEYS OFF??? 1.3 Sierra

Board index » Talking About Stuff » Suzuki Talk

HOW DO I GET THE CRANK AND CAM PULLEYS OFF??? 1.3 Sierra

Page 1 of 1

[ 17 posts ]

Print view

Previous topic | Next topic

Author

Message

Trypt

Joined: Tue Apr 17, 2012 11:19 am
Posts: 492
Vehicle: 1.3 Tin Top

Posted: Mon Sep 24, 2012 2:19 pm

This week im doing my big project of body work, rust repair and some engine maitenance.
Im replacing the timing belt, water pump and rad.

HOW DO I GET THE CRANK AND CAM PULLEYS OFF??? (so i can replace the seals)
is there a trick???

Thank you in advance

DarkHorse

az supporter

Joined: Wed Apr 14, 2010 11:30 pm
Posts: 5413
Vehicle: 08 SV650

Posted: Mon Sep 24, 2012 2:34 pm

Several, search for "crank pulley breaker bar".

Trypt

Joined: Tue Apr 17, 2012 11:19 am
Posts: 492
Vehicle: 1.3 Tin Top

Posted: Mon Sep 24, 2012 2:43 pm

THank you very much

laurie

az supporter

Joined: Fri Oct 31, 2008 10:30 pm
Posts: 1540
Location: Blackbutt
Vehicle: LJ80

Posted: Mon Sep 24, 2012 2:51 pm

i used a piece of square tube with two bolts through it for the cam pulley
and a long bar plus the starter for the crank ( TIGHT )

zukmeista

Joined: Sun Mar 22, 2009 10:30 pm
Posts: 1273
Location: Whangarei,N.Z.

Posted: Mon Sep 24, 2012 3:00 pm

Crank pulley, need a breaker bar about a meter long, put the car in 5th gear with handbrake on. Worked for me. You will also need a crank pulley remover tool thingy.

sideways

az supporter

Joined: Fri Oct 29, 2010 1:53 pm
Posts: 5936
Location: Northcliffe, W.A.
Vehicle: LJs, Sierra, Jimny, Swift.

Posted: Mon Sep 24, 2012 3:03 pm

I used a $70 electric rattle gun off ebay, it did it easy.

Trypt

Joined: Tue Apr 17, 2012 11:19 am
Posts: 492
Vehicle: 1.3 Tin Top

Posted: Mon Sep 24, 2012 3:31 pm

I think I might leave it for the mechanic... will it hurt if i don't do the seals now?

buzbox

Joined: Thu Jul 16, 2009 11:30 pm
Posts: 3600
Location: Wollongong NSW
Vehicle: LWB Sierra & XL7

Posted: Mon Sep 24, 2012 3:36 pm

Crank pulley, Loosie on the ground or chassis, an extention pipe over Loosie's handle usually does the trick and turn the key. (oh Loosie is what I call my breaker bar)

Rattle gun for the cam pulley.

Undoing the bolts is the hard part.

_________________
'92 Vitara & Camper trailer

Trypt

Joined: Tue Apr 17, 2012 11:19 am
Posts: 492
Vehicle: 1.3 Tin Top

Posted: Mon Sep 24, 2012 8:38 pm

Picture is inspiring but it will have to wait til I can get my hands on a rattle gun.

laurie

az supporter

Joined: Fri Oct 31, 2008 10:30 pm
Posts: 1540
Location: Blackbutt
Vehicle: LJ80

Posted: Mon Sep 24, 2012 9:42 pm

rattle gun not needed for cam pulley
i use this and a socket they are welded but bolted will also work

DMAC

az supporter

Joined: Thu Jan 29, 2009 10:30 pm
Posts: 1612
Location: North Brisbane

Posted: Tue Sep 25, 2012 6:24 am

Have you got a FSM?

To remove the camshaft pully you put a screwdriver in a hole around cylinder No.2 of the camshaft. Hold it still while you use a spanner to undo the bolt.

_________________
SS

Trypt

Joined: Tue Apr 17, 2012 11:19 am
Posts: 492
Vehicle: 1.3 Tin Top

Posted: Tue Sep 25, 2012 11:13 am

thanks for all the help fella's

abclarke

Joined: Mon Feb 14, 2011 8:19 am
Posts: 1966
Location: Couridjah
Vehicle: 1985 Holden Drover

Posted: Tue Sep 25, 2012 4:58 pm

DMAC wrote:

Have you got a FSM?

To remove the camshaft pully you put a screwdriver in a hole around cylinder No.2 of the camshaft. Hold it still while you use a spanner to undo the bolt.

x2.

Its all in the FSM. Or just use a big podger if you dont have a screw driver big enough

Trypt

Joined: Tue Apr 17, 2012 11:19 am
Posts: 492
Vehicle: 1.3 Tin Top

Posted: Tue Sep 25, 2012 7:22 pm

Not in with all the lingo. FSM?

Fatzook

az supporter

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Posted: Tue Sep 25, 2012 8:05 pm

Trypt wrote:

Not in with all the lingo. FSM?

Service manual. :wink:

_________________
2013 GV
1998 SV420 ute

Trypt

Joined: Tue Apr 17, 2012 11:19 am
Posts: 492
Vehicle: 1.3 Tin Top

Posted: Wed Sep 26, 2012 8:45 am

Ahah i see :rofl:

HarryHoudini

Joined: Fri Jul 01, 2011 12:34 am
Posts: 359
Location: Northern NSW Australia.
Vehicle: Coily.

Posted: Wed Sep 26, 2012 10:28 am

sideways wrote:

I used a $70 electric rattle gun off ebay, it did it easy.

Any Link,can only see A$129 +. TIA

Page 1 of 1

[ 17 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: Google [Bot], sideways and 377 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum