| Author |
Message |
Rossco
Joined: Fri May 28, 2010 10:28 am Posts: 529 Location: Townsville, QLD
Vehicle: 91 WT 1.6EFI
|
 Posted: Wed Oct 03, 2012 12:12 pm |
|
after the g16b conversion was done I needed something to occupy my time, so I got two little day old chooks. Two months on they were in need of a home outside a box in the garage so this is what I put together on the weekend.   its made of treated ceiling battens from bunnings and 65mm chipboard screws.   used a small mesh to keep small birds and rodents out and covered the house part in colorbond offcuts courtesy of the new construction development down the road.  I planed on the corners of the battens on the inside to make roosting more comfortable. the auto feeder and waterer are from a website, dine-a-chook I think it was. heaps better than having to change the water every day and there's no feed wastage. the roof is hinged and folds up to access the inside of the house. I just used a sam's warehouse tub for the nesting box when the time comes for them to start laying. Here are the girls  I have my design drawings that I can scan if anyone is interested. Rossco
|
|
|
|
 |
gvzookdriver

az supporter
Joined: Mon Apr 13, 2009 11:30 pm Posts: 1833 Location: Brisbane
Vehicle: Sold zuk got a Bt50
|
 Posted: Wed Oct 03, 2012 7:46 pm |
|
|
Nice I really like it
_________________ bt50 now but still love the zooks
|
|
|
|
 |
Trypt
Joined: Tue Apr 17, 2012 11:19 am Posts: 492
Vehicle: 1.3 Tin Top
|
 Posted: Thu Oct 04, 2012 9:10 pm |
|
|
|
 |
twojay
Joined: Sun Aug 05, 2012 5:28 pm Posts: 14
Vehicle: Jimny
|
 Posted: Thu Oct 04, 2012 10:50 pm |
|
|
Beauty, should keep out the foxes. Those feeders and drinkers look good, just bought them online just now. They always knock over their trough and shit in it.
|
|
|
|
 |
PJ.zook

az supporter
Joined: Sat Oct 24, 2009 10:30 pm Posts: 845 Location: Melbourne
|
 Posted: Fri Oct 05, 2012 7:01 am |
|
|
Looks like a pretty good unit. By the looks of it, much like mine were, the chooks are free to roam the backyard during the day, which is great. But, be prepared for a never-ending deluge of shit everywhere you don't want it, especially around your doorways and windowsills.
|
|
|
|
 |
Rossco
Joined: Fri May 28, 2010 10:28 am Posts: 529 Location: Townsville, QLD
Vehicle: 91 WT 1.6EFI
|
 Posted: Fri Oct 05, 2012 7:34 am |
|
twojay wrote: Beauty, should keep out the foxes. Those feeders and drinkers look good, just bought them online just now. They always knock over their trough and shit in it. ya there great! no feed or water wastage so they will pay for them selves in a few months. I thought about building it myself but after working out prices it was only about $10 more to buy it from old mate, and it turned out he lives two streets over from me so I just walked over and got one. PJ.zook wrote: Looks like a pretty good unit. By the looks of it, much like mine were, the chooks are free to roam the backyard during the day, which is great. But, be prepared for a never-ending deluge of shit everywhere you don't want it, especially around your doorways and windowsills. ha ya shitting is a hobby of theirs in a big way. They like the veranda, but a quick spray of the hose sorts them out and they hate it so much they seem to learn to stay off. I move the coop every three says or so and then just hose the ground where it was to wash the poo away. I do what I can but there is always the odd cold and squishy land mine about.
|
|
|
|
 |
PJ.zook

az supporter
Joined: Sat Oct 24, 2009 10:30 pm Posts: 845 Location: Melbourne
|
 Posted: Wed Oct 10, 2012 4:02 pm |
|
|
Hehe tried the hose with mine, they learnt they could get away faster than it took me to get the door open. They knew perfectly well they weren't meant to be there.
|
|
|
|
 |
Rhinoman
Joined: Mon May 16, 2011 7:03 pm Posts: 686 Location: Brinkworth, England
|
 Posted: Thu Oct 11, 2012 7:12 am |
|
PJ.zook wrote: They knew perfectly well they weren't meant to be there. Ha Ha, yeah they know.
|
|
|
|
 |
Jimny1
Joined: Mon Jul 09, 2012 8:20 am Posts: 68 Location: Central Vic
Vehicle: 06 Jimny 60 Series Cruiser
|
 Posted: Fri Oct 19, 2012 5:00 am |
|
Last edited by Jimny1 on Fri Oct 19, 2012 5:05 am, edited 1 time in total.
|
|
|
|
 |
Jimny1
Joined: Mon Jul 09, 2012 8:20 am Posts: 68 Location: Central Vic
Vehicle: 06 Jimny 60 Series Cruiser
|
 Posted: Fri Oct 19, 2012 5:02 am |
|
Meh........... chooks you buy eggs for six months of the year and chook pellets for 12 months of the year, and they shit every where because they can. But hey nice chicken coup and the chooks will make nice chicken soup............................ 
|
|
|
|
 |
Rhinoman
Joined: Mon May 16, 2011 7:03 pm Posts: 686 Location: Brinkworth, England
|
 Posted: Fri Oct 19, 2012 5:04 am |
|
|
Have you got a better picture of that feeder? I was looking at a few on ebay and they all seem to be quite simply made out of drain pipe, I'm sure it would be simple enough to make one.
|
|
|
|
 |
PJ.zook

az supporter
Joined: Sat Oct 24, 2009 10:30 pm Posts: 845 Location: Melbourne
|
 Posted: Fri Oct 19, 2012 5:59 am |
|
|
Chickens are great for weeding the garden, but once you realise that standing in shit constantly is unpleasant, plus you then realise you can buy 24 eggs from the market for like $5...
|
|
|
|
 |
Rossco
Joined: Fri May 28, 2010 10:28 am Posts: 529 Location: Townsville, QLD
Vehicle: 91 WT 1.6EFI
|
 Posted: Fri Oct 19, 2012 8:19 am |
|
Rhinoman wrote: Have you got a better picture of that feeder? I was looking at a few on ebay and they all seem to be quite simply made out of drain pipe, I'm sure it would be simple enough to make one. I looked into this, I'm all about DIY. I found a really good step by step process on how to build one but I cant find it now. google PVC auto chicken feeder or something along those lines. Other people have made it themselves. Heres one on youtube, a bit rougher than the one I bought but the same idea with the smaller pipe controlling the feed height. http://www.youtube.com/watch?v=UAWpEcwRLnARossco
|
|
|
|
 |
stockman

az supporter
Joined: Thu Nov 05, 2009 10:30 pm Posts: 5319 Location: Canberra
Vehicle: 4wd
|
 Posted: Sun Dec 16, 2012 4:14 pm |
|
Nice coop. I hate working with wood. Much prefer metal. Here is the skeleton of my coop: 
_________________ Watch out or you'll get sued.
|
|
|
|
 |
mnemonix

az supporter
Joined: Sun Aug 16, 2009 11:30 pm Posts: 1409 Location: Newcastle NSW
Vehicle: '96 LWB trayback
|
 Posted: Sun Dec 16, 2012 4:29 pm |
|
|
What did you use to roll such a wide radius on those bends?
|
|
|
|
 |
stockman

az supporter
Joined: Thu Nov 05, 2009 10:30 pm Posts: 5319 Location: Canberra
Vehicle: 4wd
|
 Posted: Sun Dec 16, 2012 6:45 pm |
|
|
Had them rolled.
_________________ Watch out or you'll get sued.
|
|
|
|
 |
driftr

az supporter
Joined: Wed Jul 16, 2008 11:30 pm Posts: 264 Location: Mandalong NSW
Vehicle: 1995 Vitara JX
|
 Posted: Wed Dec 19, 2012 10:10 am |
|
|
i just received one of the feeders and water adapter for a jerry can!
so much cleaner than the messy bird feeders that were in there, and no more wasted water.
|
|
|
|
 |
dawsey
Joined: Fri Mar 19, 2010 10:30 pm Posts: 218 Location: perth
|
 Posted: Thu Dec 20, 2012 4:30 pm |
|
looks good ..but does it fit on the back of your zook so you can take them for a day out.. stockman wrote: Nice coop. I hate working with wood. Much prefer metal. Here is the skeleton of my coop: 
You do not have the required permissions to view the files attached to this post.
|
|
|
|
 |
|