auszookers.com • View topic - early 1997 G13BB Baleno eng into 85 Sierra / Drover

Board index » Talking About Stuff » N00b Talk

early 1997 G13BB Baleno eng into 85 Sierra / Drover

Page 1 of 1

[ 8 posts ]

Print view

Previous topic | Next topic

Author

Message

sooty

Joined: Mon Apr 12, 2010 11:30 pm
Posts: 12
Location: Sydney AU

Posted: Wed Oct 24, 2012 5:12 pm

Hi,

Found a complete Baleno with a worn motor for $200 and i was thinking about getting it for the engine conversion.
It has the coilpacks where the distributor normally is.

I haven't found a G13BB conversion thread yet - still looking, do you know of a good thread?

Cheers,
Steve

stockman

az supporter

Joined: Thu Nov 05, 2009 10:30 pm
Posts: 5319
Location: Canberra
Vehicle: 4wd

Posted: Wed Oct 24, 2012 5:54 pm

Are you sure it's a g13bb?
From what I have seen all the Balenos come out with the g16b and up until 99 were all dizzy.
I guess someone could of replaced it with a g13bb out of a Swift.

_________________
Watch out or you'll get sued.

want33s

az supporter

Joined: Fri Nov 16, 2007 10:30 pm
Posts: 8135
Location: Sunshine Coast Qld

Posted: Wed Oct 24, 2012 9:01 pm

stockman wrote:

Are you sure it's a g13bb?
From what I have seen all the Balenos come out with the g16b and up until 99 were all dizzy.

X2.....

$200 for a worn out motor is waaayyyy too much money...
Baleno's with good G16B's often sell for under $500.

sooty

Joined: Mon Apr 12, 2010 11:30 pm
Posts: 12
Location: Sydney AU

Posted: Thu Oct 25, 2012 3:35 pm

stockman wrote:

Are you sure it's a g13bb?
From what I have seen all the Balenos come out with the g16b and up until 99 were all dizzy.
I guess someone could of replaced it with a g13bb out of a Swift.

On the firewall was a build plate with the VIN no , July 97 and G13B.

want33s

az supporter

Joined: Fri Nov 16, 2007 10:30 pm
Posts: 8135
Location: Sunshine Coast Qld

Posted: Thu Oct 25, 2012 5:11 pm

Build plates are quite often WRONG...
What is on the engine block?

sooty

Joined: Mon Apr 12, 2010 11:30 pm
Posts: 12
Location: Sydney AU

Posted: Thu Oct 25, 2012 8:26 pm

want33s wrote:

Build plates are quite often WRONG...
What is on the engine block?

Oh...
Won't be able to look until Sat.
http://i748.photobucket.com/albums/xx122/J--a--y/balenoenglocn.jpg

sooty

Joined: Mon Apr 12, 2010 11:30 pm
Posts: 12
Location: Sydney AU

Posted: Fri Oct 26, 2012 7:06 pm

want33s wrote:

Build plates are quite often WRONG...
What is on the engine block?

Dumb mates are quite often wrong :oops:

Attachment:

baleno hayley vin.jpg

It was at night - sorry fellas

Found CairnsZook's Baleno G16B conversion

You do not have the required permissions to view the files attached to this post.

BlueSuzy

az supporter

Joined: Sun May 04, 2008 11:30 pm
Posts: 9715
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Posted: Fri Oct 26, 2012 7:48 pm

Don't stress. I have seen a G13b Baleno with my own eyes.

It must of been an import.

_________________

BlueSuzy wrote:

I'm over the G16b's.

Page 1 of 1

[ 8 posts ]

Board index » Talking About Stuff » N00b Talk

Who is online

Users browsing this forum: No registered users and 9 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum