[the-ninja-kid]

All sold, please delete

[Reubs]

PM SENT - regarding suspension and underbody guards.

[swifty_ano]

If anyone confirms if the bullbar can be made to fit easily to a se416 then I'll take it

[mike.knew]

Pm sent

[DarkHorse]

swifty_ano wrote:

If anyone confirms if the bullbar can be made to fit easily to a se416 then I'll take it

Depends on your definition of easily - SV chassis is something like 30mm wider than the SE, so some custom bracketometry would be required (same for the rear bar depending on how it mounts and underbody stuff I'd imagine.)

[the-ninja-kid]

DarkHorse wrote:

swifty_ano wrote:

If anyone confirms if the bullbar can be made to fit easily to a se416 then I'll take it

Depends on your definition of easily - SV chassis is something like 30mm wider than the SE, so some custom bracketometry would be required (same for the rear bar depending on how it mounts and underbody stuff I'd imagine.)

bar mounts with 4 bolts 2 into the side of the chassis and 2 into the top of the chassis the SV having a Wider chassis I would either cut the brackets off and weld new ones on, or make plates/spacers to fit. Ive never owned a 1.6 so couldnt tell you to be honest. the bull bar is of the car so I caan measure things if required.

Leroy

[swifty_ano]

Hi Leeroy.

Been trying to call but the phone is switched off.
I'll try later.

[the-ninja-kid]

swifty_ano wrote:

Hi Leeroy.

Been trying to call but the phone is switched off.
I'll try later.

Sorry mate, was on the motorbike riding home.

[the-ninja-kid]

more parts added, if its not listed just ask me and ill let you know If I have it

[the-ninja-kid]

All prices are negotiable people, I need this thing gone, what happened to all the people telling me to part it out I part it out then none of you want the bits? the more you buy the cheaper the bits get!

added the engine/gearbox and a few other bits to the list.
heaps of small bits aswell just ask.

I will consider shipping on bits also now.

Leroy

[swifty_ano]

So underbody guards didn't sell?

[the-ninja-kid]

swifty_ano wrote:

So underbody guards didn't sell?

still on hold, sorry I should update that too.

[Reubs]

swifty_ano wrote:

So underbody guards didn't sell?

I didn't buy them...

[the-ninja-kid]

Reubs wrote:

swifty_ano wrote:

So underbody guards didn't sell?

I didn't buy them...

theres a bit of a queue of people after them but ime alowing then all the chance in order of enquirey. 3 people after them since you descided against them Reubs

was good to meet you though

[Charlie Brown]

Txt sent regarding flares

[the-ninja-kid]

test replied to,
Add updated, some bits added. still other bits that arent listed like interior bits and things like that

if anyone is interested in taking the body and chassis with the engine and loom in it would be my preference as then I don't have to pull the engine out

all prices are negotiable, some more than others. will swap bits aswell I am after a set of Lightforce Lance 140's and a 20" LED light bar.

or something cool, bits that have sold have gotten me out of the little money trap I was in but still want theese bits moved fast so I can have my driveway back!

Leroy

[Zook_Fan]

Auto or manual?

[the-ninja-kid]

Zook_Fan wrote:

Auto or manual?

5 speed manual, clutch probably needs replacing

Thanks.

[the-ninja-kid]

anyone with offers on bits? all prices are negotiable, i need to get these parts/car of my driveway so many people after bits when i wasnt going to part it and as soon as i do no-one wants anything anymore?

[055ETH]

How are the Tyres on the rims?

[the-ninja-kid]

055ETH wrote:

How are the Tyres on the rims?

tires have enough tred but are a little hard in my opinion but they were fine offroad with the pressures down.

spare is near new slightly different size but rolling diameter is the same. Wheels are stock SV420 steelies.

[swifty_ano]

Anyone know if the sv420 swb tail shaft will fit a 1.6?
I have the latest style spline ons transferase.

[atari4x4]

should do

[swifty_ano]

I guess we will find out

[shandy92]

whats the part number of the front diff locker?? RD208/RD88?
will it fit a SE?

[Fatzook]

shandy92 wrote:

whats the part number of the front diff locker?? RD208/RD88?
will it fit a SE?

Yes. But it will most likely have the 4.6 ratio R&P, so you'll need to swap it and have the backlash set.

[swifty_ano]

Plus it's still in the alloy third member.

[shandy92]

swifty_ano wrote:

Plus it's still in the alloy third member.

yeah i know, thats not hard to change tho. i got a steel housing already fitted

Fatzook wrote:

shandy92 wrote:

whats the part number of the front diff locker?? RD208/RD88? will it fit a SE?

Yes. But it will most likely have the 4.6 ratio R&P, so you'll need to swap it and have the backlash set.

yeah i would be getting it just for the locker on its own. sell whats left.

cheers

[the-ninja-kid]

Yeah 4.6 R&P and alloy housing. In do have a set of 5.12 diffs and steel housing also.

And its the RD88

[the-ninja-kid]

Need theese parts gone, mainly the bulky items I.E. the motor & gearbox
Ill consider all offers on theese, even if you think your offer is silly txt/message me you might be surprised as I cant have it on my driveway at christmas!

will trade parts for:
tools
old gaming consoles/games
a small trailer (like a 6x4/7x4 or something like that)
LED light bar

I just need the bulky stuff gone and im not strapped for cash anymore the bits sold so far have fixed that up for me.

so send me offers!