| Author |
Message |
Zook_Fan

az supporter
Joined: Thu Mar 13, 2008 10:30 pm Posts: 4530 Location: Toowoomba
Vehicle: Maruti and LJ80's
|
 Posted: Fri Dec 07, 2012 8:42 am |
|
|
2 x ARB Airlockers - $1200ea One is a RD88, very rarely used as it is in the front. Probably has seen around 500klms in this car since it was put in. The other is a RD208, installed by ARB in August 2012. Has done 1 comp, wouldn’t have even done 100km’s. Both are basically brand new and fitted to 3.9 centres. All bearings were done at install of both lockers.
1 Pair of Sierra Chromo CV’s - $150 - Sold Installed the same time as the RD88 and has had the same usage.
Set of Vitara LWB front Calipers and rotors - $150 - Sold Used but good condition. I never got to use them as they scrubbed on my wheels.
Set of Double Black Offroad Flares - $350 These are the flexible round flares sold by Double Black. Brand new, never been fitted.
G16a with Ben T conversion kit - $700 package Package includes extractors, VL commodore engine mounts, Ben T conversion kit and G16a engine. Everything you need to put it straight into a Sierra. Viscous hub on the front has just been reoiled.
Jimny Powersteering Set up - $450 - Sold Works flawlessly pushing 31” Silverstone Extreme’s around at 4psi. Includes pump, reservoir, lines and box.
Vit LWB Alloy Radiator - $150 Brand new still in the box. Bought it to keep the G16a a lot cooler but never installed it.
G16a Torque Camshaft - $100 Reground camshaft to suit G16a to increase engine torque. Never installed personally so I don’t know how it performs.
JC’s Transfer Lift Kit - $80 - Sold Never installed, still in the bag
JC Body Lift - $100 Has been in the car for a couple of years. Removing to get the car lower.
6.5 Transfer Case with Ben T Transfer Arms -$850 Recently rebuilt case – Approximately 300km’s since rebuild. The Ben T arms are great for distributing load.
6.5 Transfer Case - $600 - Sold Condition unknown. I’ve never run this case, was purchased to run as a spare but never broke the first one. Handbrake on the back needs attention or removal if going in a WT. Might need a shifter bush.
JML Floater Kit with brakes - $800 This is the bolt on JML floater kit with the correct callipers, rebuilt 100km’s ago, brand new vitara rotors, fresh bearings in the hubs, with spindles and GV solid flanges. This stuff cost a lot to get together and has had barely any use.
Spare set of GV Solid Drive Flanges - $80 - Sold End cap on one is damaged but that does not affect the performance.
Front and Rear GV 4.3 R&P Gear sets - $150ea or $250 for both - Sold Either run the front in a sierra or for those wanting gearing and going full floater vit rear, as was my intention, run both for decent gearing.
Front Vit 5.12 R&P - $100 - Sold Still in alloy diff, can supply the whole thing or just the R&P.
TSOR Chromoly Steering Arms - $450 - Sold Hardly used, don’t think they are even scratched. Great steering arm upgrade.
2 Sets of 4 31” Silverstone Extreme’s - $800each set Both are around 80-90% tread. Currently on rims but will be sold without
4 Black 15x7 Rims - $150 set Unsure of brand, I think around a -13 offset but can’t confirm until I can get to the rims again.
Sierra Gearbox - $100 Used but good condition. No grinding in any gears and has tight shift. Approx 220 thou km’s
SWB Driveshafts - $60ea Front and Rear Sierra SWB driveshafts. Same k’s as gearbox. Uni’s replaced 500km’s ago.
TSOR Fuel Tank Guard - $100 Has rock rash. Solid dint in the back but not bad enough to touch the tank.
Standard Fuel Tank - $50 No leaks, don’t recall any dints but it probably has a few small ones.
WT rear diff housing on NT mounts - $70 Has been shaved by a previous owner.
AVM Heavy Duty Freewheeling Hubs - $80 pair - On Hold Have had them on for a while with no problems in the front end.
May be more to come – pretty much most of the car except the chassis, some of the body and the cage will be parted out. Note I’m currently out of town so I may not be able to do pictures in a rush. If interested in any parts contact me and I’ll see what I can do. All parts currently located in Rockhampton, QLD.
Last edited by Zook_Fan on Tue Jan 08, 2013 6:51 am, edited 1 time in total.
|
|
|
|
 |
Bruce

az supporter
Joined: Sun Jun 11, 2006 11:30 pm Posts: 4003 Location: Brisbane
|
 Posted: Fri Dec 07, 2012 10:39 am |
|
I'll take the Pair of Sierra Chromo CV’s - $150 Just need to work out to get them to Brisbane. Pm me when you get time and we can work out payment and Transport. 
_________________ [quote="royce"] I wouldnt mind insulating my rear
|
|
|
|
 |
Teracis
Joined: Sat Dec 11, 2010 10:03 pm Posts: 2261 Location: Gold Coast
Vehicle: Daisy
|
 Posted: Fri Dec 07, 2012 3:51 pm |
|
|
I'd like the jimny powersteering setup please. $450
I'm on the Gold Coast 4218, happy to bundle together with someone in GC or Brisbane if it will make our freight cheaper and I can just meet up with them for pickup?
Cheers Tim
|
|
|
|
 |
Zook_Fan

az supporter
Joined: Thu Mar 13, 2008 10:30 pm Posts: 4530 Location: Toowoomba
Vehicle: Maruti and LJ80's
|
 Posted: Fri Dec 07, 2012 5:02 pm |
|
Done Bruce  Power steering also sold pending payment
|
|
|
|
 |
redrocketsj50

az supporter
Joined: Wed May 19, 2010 9:20 am Posts: 268 Location: Sale victoria
|
 Posted: Fri Dec 07, 2012 5:32 pm |
|
|
What's the tank guard worth posted to sale 3850 victoria
|
|
|
|
 |
4x4xzook
Joined: Wed May 16, 2012 8:41 am Posts: 730 Location: Melbourne
Vehicle: MG410 Gypsy
|
 Posted: Sat Dec 15, 2012 12:55 am |
|
|
Have u sold the chromolys?
|
|
|
|
 |
|
bozzaa
|
 Posted: Sat Dec 15, 2012 5:52 pm |
|
|
hey mate i will take 5.12 r&p if reasonably priced shipping to vic?
|
|
|
|
 |
jonozuk666
Joined: Sun Sep 23, 2012 5:19 pm Posts: 47 Location: brisbane
Vehicle: 92 Sierra bars F&R locked
|
 Posted: Mon Dec 17, 2012 6:26 am |
|
|
Is the fuel tank guard still for sale?
|
|
|
|
 |
Zook_Fan

az supporter
Joined: Thu Mar 13, 2008 10:30 pm Posts: 4530 Location: Toowoomba
Vehicle: Maruti and LJ80's
|
 Posted: Mon Dec 17, 2012 7:50 am |
|
|
Redrockets is first in line for the fuel tank guard depending on a frieght price.
Which chromolys? CV's are spoken, rear axles and steering still available.
Bozzaa I'll send you a pm.
|
|
|
|
 |
jonozuk666
Joined: Sun Sep 23, 2012 5:19 pm Posts: 47 Location: brisbane
Vehicle: 92 Sierra bars F&R locked
|
 Posted: Mon Dec 17, 2012 9:17 am |
|
|
If he doesnt get the tank gaurd ill buy it.
|
|
|
|
 |
camskea
Joined: Sun Jul 24, 2011 2:38 am Posts: 179 Location: Melbourne
Vehicle: 1991 Vitara SWB
|
 Posted: Fri Dec 21, 2012 11:08 am |
|
|
How high is the body lift kit? What's it made out of?
|
|
|
|
 |
Zook_Fan

az supporter
Joined: Thu Mar 13, 2008 10:30 pm Posts: 4530 Location: Toowoomba
Vehicle: Maruti and LJ80's
|
 Posted: Fri Dec 21, 2012 11:09 am |
|
|
2". It's a Just_Cruizin kit so it is a poly of some sort but not sure on exactly what it is.
|
|
|
|
 |
just_cruizin

az supporter
Joined: Sun Jun 25, 2006 11:30 pm Posts: 2867 Location: here
|
 Posted: Fri Dec 21, 2012 9:47 pm |
|
|
Polyeruthane 75D, same product is used in crane baseplates. Incredibly durable product.
_________________ greenzook89 wrote: 31zook wrote: Makes me want something similar
|
|
|
|
 |
jonozuk666
Joined: Sun Sep 23, 2012 5:19 pm Posts: 47 Location: brisbane
Vehicle: 92 Sierra bars F&R locked
|
 Posted: Mon Dec 24, 2012 6:40 am |
|
|
Has the fuel tank guard been sold yet?
|
|
|
|
 |
camskea
Joined: Sun Jul 24, 2011 2:38 am Posts: 179 Location: Melbourne
Vehicle: 1991 Vitara SWB
|
 Posted: Mon Dec 24, 2012 12:20 pm |
|
|
Thanks, I'll think about it... For some reason poly body lift kits aren't legal in Vic.
|
|
|
|
 |
DarkHorse

az supporter
Joined: Wed Apr 14, 2010 11:30 pm Posts: 5413
Vehicle: 08 SV650
|
 Posted: Tue Dec 25, 2012 8:15 pm |
|
camskea wrote: Thanks, I'll think about it... For some reason poly body lift kits aren't legal in Vic. ...and they're the only ones legal in NSW. Go figure. 
|
|
|
|
 |
96coily
Joined: Fri Jun 04, 2010 11:37 am Posts: 1420 Location: Perth Hills
Vehicle: 96 coily Awesome sticker Rust
|
 Posted: Tue Dec 25, 2012 8:24 pm |
|
|
|
 |
locko
Joined: Fri Nov 16, 2012 8:22 pm Posts: 4
Vehicle: Ratio's, Twin Locked Sierra
|
 Posted: Fri Dec 28, 2012 8:51 am |
|
|
Do you still have the flares
|
|
|
|
 |
SuziBlu
Joined: Mon Sep 14, 2009 11:30 pm Posts: 4268 Location: Eyre Peninsula
|
 Posted: Fri Dec 28, 2012 1:39 pm |
|
|
|
 |
Zook_Fan

az supporter
Joined: Thu Mar 13, 2008 10:30 pm Posts: 4530 Location: Toowoomba
Vehicle: Maruti and LJ80's
|
 Posted: Fri Jan 04, 2013 12:38 pm |
|
|
All pm's replied too I think, if I've missed anyone just let me know. I apologise for the delay, I've been quite sick recently so haven't been able to do things as fast as I would have liked.
|
|
|
|
 |
Bruce

az supporter
Joined: Sun Jun 11, 2006 11:30 pm Posts: 4003 Location: Brisbane
|
 Posted: Fri Jan 04, 2013 1:04 pm |
|
No worries Zook_Fan, just PM me when ya ready to work it out 
_________________ [quote="royce"] I wouldnt mind insulating my rear
|
|
|
|
 |
Teracis
Joined: Sat Dec 11, 2010 10:03 pm Posts: 2261 Location: Gold Coast
Vehicle: Daisy
|
 Posted: Fri Jan 04, 2013 3:16 pm |
|
^^^ Same, I've got cash ready to transfer when you let me know postage cost  Good luck with getting better mate!
|
|
|
|
 |
TWINCAM16
Joined: Tue Jun 05, 2012 8:25 pm Posts: 75
Vehicle: 93 sierra, 1600twincam
|
 Posted: Fri Jan 04, 2013 5:10 pm |
|
|
just making sure the power steering is gone?
|
|
|
|
 |
atari4x4

az supporter
Joined: Mon Dec 11, 2006 10:30 pm Posts: 34842 Location: East Radelayed
Vehicle: SV420+SV620 Vitara's
|
 Posted: Fri Jan 04, 2013 5:28 pm |
|
TWINCAM16 wrote: just making sure the power steering is gone? darkhorse has a complete vit power steer set up that he's looking at off loading. viewtopic.php?f=7&t=37563&p=696385#p696385
_________________ You're just hating because you don't understand
|
|
|
|
 |
Zook_Fan

az supporter
Joined: Thu Mar 13, 2008 10:30 pm Posts: 4530 Location: Toowoomba
Vehicle: Maruti and LJ80's
|
 Posted: Fri Jan 04, 2013 5:35 pm |
|
TWINCAM16 wrote: just making sure the power steering is gone? Yeah sorry it's as good as gone. I'd be hitting up Darkhorse
|
|
|
|
 |
jdk81
Joined: Sat Jul 18, 2009 11:30 pm Posts: 2372 Location: Ballarat, VIC
|
 Posted: Sun Jan 06, 2013 7:54 pm |
|
|
Kevin is a top bloke!!!
Last edited by jdk81 on Sat Jan 12, 2013 7:41 pm, edited 1 time in total.
|
|
|
|
 |
Bugsta
Joined: Fri Oct 30, 2009 10:30 pm Posts: 1754 Location: North Brisbane
|
 Posted: Mon Jan 07, 2013 3:41 pm |
|
|
Whats your best offer on the spare flanges and shipping to Brisbane?
|
|
|
|
 |
Zook_Fan

az supporter
Joined: Thu Mar 13, 2008 10:30 pm Posts: 4530 Location: Toowoomba
Vehicle: Maruti and LJ80's
|
 Posted: Mon Jan 07, 2013 3:44 pm |
|
|
They're sold pending payment clearing. I'll update the post tonight with what is sold and what is still here
|
|
|
|
 |
Bucket

az supporter
Joined: Mon Nov 30, 2009 10:30 pm Posts: 2191 Location: Vic
Vehicle: SJ50 hardtop!
|
 Posted: Mon Jan 07, 2013 4:41 pm |
|
|
Still waiting on a freight quote for the rear diff if you still have it. Not too fussed if it's sold though.
|
|
|
|
 |
toastysteve
Joined: Tue Feb 16, 2010 10:30 pm Posts: 112 Location: Brisbane (Northside)
Vehicle: SJ413 WT
|
 Posted: Mon Jan 07, 2013 9:03 pm |
|
|
|
 |
|