auszookers.com • View topic - Sierra Rock Assault Axle set

Board index » Talking About Stuff » Suzuki Talk

Sierra Rock Assault Axle set - Nov 2012

Page 1 of 1

[ 25 posts ]

Print view

Previous topic | Next topic

Author

Message

SierraDan

az supporter

Joined: Fri Feb 04, 2011 10:55 pm
Posts: 9348
Location: Newcastle
Vehicle: G13BB Jimny

Posted: Sun Dec 23, 2012 11:39 am

I went to put my long side axle/CV into my diff this morning to discover it wouldnt go into the centre..
Compared it to the stock axle and it was 150mm shorter than stock. Just a warning to those ordering a set in the near future to check with the LROR that they are correct lengths before they leave the shop.

I am also not overly happy with the quality of the axles compared to my old set. They are obiviously cheaper, the process of production has changed in some way the axles are no longer a matching polished appearance and the splines are cut average at best. Prices have gone up though...

Hope this info helps people in making a worthwhile purchase.

_________________
mlm

stockman

az supporter

Joined: Thu Nov 05, 2009 10:30 pm
Posts: 5319
Location: Canberra
Vehicle: 4wd

Posted: Sun Dec 23, 2012 11:48 am

How long is the stock one?

_________________
Watch out or you'll get sued.

SierraDan

az supporter

Joined: Fri Feb 04, 2011 10:55 pm
Posts: 9348
Location: Newcastle
Vehicle: G13BB Jimny

Posted: Sun Dec 23, 2012 11:50 am

Axle? about 700mm.
My chromo is about 550mm.

_________________
mlm

stockman

az supporter

Joined: Thu Nov 05, 2009 10:30 pm
Posts: 5319
Location: Canberra
Vehicle: 4wd

Posted: Sun Dec 23, 2012 11:53 am

Thought I'd better check mine.
Phew!

_________________
Watch out or you'll get sued.

SierraDan

az supporter

Joined: Fri Feb 04, 2011 10:55 pm
Posts: 9348
Location: Newcastle
Vehicle: G13BB Jimny

Posted: Sun Dec 23, 2012 11:56 am

I told my mate, his are fine also.

Yours is also the better quality axle... I got fuckin ripped!

_________________
mlm

jdk81

Joined: Sat Jul 18, 2009 11:30 pm
Posts: 2372
Location: Ballarat, VIC

Posted: Sun Dec 23, 2012 12:13 pm

Raise it with LROR.

I assume you paid with credit card too, so if all else fails you could try do a charge back.

SierraDan

az supporter

Joined: Fri Feb 04, 2011 10:55 pm
Posts: 9348
Location: Newcastle
Vehicle: G13BB Jimny

Posted: Sun Dec 23, 2012 12:18 pm

I think it was pay pal.

I will definitely be raising it with LROR. No way in fuck would I let this go.
I've got my invoice so there shouldnt be any issue. Its the inconvenience that pisses me off, I have to wait till the 28th if I'm lucky before I can contact them, other wise it will be in the new year.

I would hope they'd send a correct axle ASAP without fail..

_________________
mlm

Ratty562

Joined: Fri Apr 09, 2010 11:30 pm
Posts: 839
Location: NSW, Sydney

Posted: Sun Dec 23, 2012 1:28 pm

LROR will send a new one out pretty fast

they had send me the wrong size air shocks i didnt no till i ran tap over it and they sent the new ones with me sent the old ones back first

jonfromhamilton

Joined: Mon Dec 26, 2011 2:11 pm
Posts: 410
Location: Pakenham
Vehicle: SJ51T

Posted: Mon Dec 24, 2012 7:17 pm

Good on ya for posting this up.
I'm just about to abuse my credit card for some!

just_cruizin

az supporter

Joined: Sun Jun 25, 2006 11:30 pm
Posts: 2867
Location: here

Posted: Wed Dec 26, 2012 1:42 pm

I hope they pay the freight for both the return and replacement

_________________

greenzook89 wrote:

31zook wrote:

Makes me want something similar

Parry

Joined: Fri Oct 05, 2012 9:14 pm
Posts: 171
Location: Newcastle
Vehicle: Getting parts atm

Posted: Wed Dec 26, 2012 6:01 pm

150mm is a huge way out! I know when I cut stuff short its alwys a 100mm, hope they fix it up for you.

31zook

Joined: Tue Mar 24, 2009 10:30 pm
Posts: 9242
Location: maito
Vehicle: <3 Edna <3

Posted: Thu Dec 27, 2012 4:21 am

Will it fit a NT?

Teracis

Joined: Sat Dec 11, 2010 10:03 pm
Posts: 2261
Location: Gold Coast
Vehicle: Daisy

Posted: Thu Dec 27, 2012 8:49 am

I put a set in on christmas eve, definitely didn't have this problem!

Also got an email from LROR this morning so have a crack today and see if they get back to you.

sideways

az supporter

Joined: Fri Oct 29, 2010 1:53 pm
Posts: 5936
Location: Northcliffe, W.A.
Vehicle: LJs, Sierra, Jimny, Swift.

Posted: Thu Dec 27, 2012 1:08 pm

31zook wrote:

Will it fit a NT?

It'd be pretty close to fitting an LJ.

mika

Joined: Mon Aug 03, 2009 11:30 pm
Posts: 351
Vehicle: Sierra

Posted: Thu Dec 27, 2012 5:04 pm

from my own experience and what I've heard LROR has very good customer service so I doubt you'll have any problems getting it sorted.
Personally for front axles and spools I prefer to buy from Trail Tough though.

Last edited by mika on Fri Dec 28, 2012 3:28 pm, edited 1 time in total.

SierraDan

az supporter

Joined: Fri Feb 04, 2011 10:55 pm
Posts: 9348
Location: Newcastle
Vehicle: G13BB Jimny

Posted: Thu Dec 27, 2012 5:48 pm

Next lot will be from Trail Tough.

_________________
mlm

SierraDan

az supporter

Joined: Fri Feb 04, 2011 10:55 pm
Posts: 9348
Location: Newcastle
Vehicle: G13BB Jimny

Posted: Thu Dec 27, 2012 6:11 pm

This is pretty piss poor too..

_________________
mlm

pezz

az supporter

Joined: Fri May 15, 2009 11:30 pm
Posts: 2108
Location: western vic
Vehicle: sj51

Posted: Thu Dec 27, 2012 6:17 pm

Hmm, think ill order the double toughs

joeblow

Joined: Sat May 10, 2008 11:30 pm
Posts: 3273
Location: melbourne

Posted: Thu Dec 27, 2012 6:29 pm

SierraDan wrote:

This is pretty piss poor too..

Those spline have been 'rolled'. This is the quickest and cheapest way of creating splines. Unfortunately the tooling obviously has not seen some maintenance in quite a while! I would ask for my money back.

SierraDan

az supporter

Joined: Fri Feb 04, 2011 10:55 pm
Posts: 9348
Location: Newcastle
Vehicle: G13BB Jimny

Posted: Thu Dec 27, 2012 6:34 pm

Yeah, i could tell. Do they use carbide tips that would be easy to change between jobs?

_________________
mlm

atari4x4

az supporter

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34842
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Posted: Thu Dec 27, 2012 6:44 pm

[youtube]atari's dodgy spline cutting youtube vid[/youtube]

:lol:

_________________
You're just hating because you don't understand

SierraDan

az supporter

Joined: Fri Feb 04, 2011 10:55 pm
Posts: 9348
Location: Newcastle
Vehicle: G13BB Jimny

Posted: Thu Dec 27, 2012 6:57 pm

I've seen splines cut with a chisel before.. haha.

_________________
mlm

31zook

Joined: Tue Mar 24, 2009 10:30 pm
Posts: 9242
Location: maito
Vehicle: <3 Edna <3

Posted: Fri Dec 28, 2012 7:23 pm

Tim hardy does it with a grinder

tanshi

az supporter

Joined: Tue Jan 09, 2007 10:30 pm
Posts: 7717
Location: Brisbane

Posted: Wed Jan 02, 2013 10:11 am

LROR will look after ya.
yeah its a pain in the ass but you wont get ripped if i know them at all.

i bought a pitman arm that turned up as the wrong part. they shipped the right one the next days free of charge and i didnt need to send the old one back at all.

SierraDan

az supporter

Joined: Fri Feb 04, 2011 10:55 pm
Posts: 9348
Location: Newcastle
Vehicle: G13BB Jimny

Posted: Wed Jan 02, 2013 1:45 pm

Yeah i knew it'd get sorted. I just posted this so others are aware before purchase.

They werent happy they arent getting the axle back but theyre sending another when they come in.

_________________
mlm

Page 1 of 1

[ 25 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: UBZ and 285 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum