[canberramav]

Up for sale is my Sierra comp truck.


older photo

It is a very regretful sale but im eying off another comp truck and i can't keep both.

This Sierra is ready to compete. Turn the key and with a good driver you could win Willowglen or Toperi.

It is engineered in NSW for all the mods except for the turbo motor. The engineers covers the 37 inch tyres.

Competition History
Toperi - I placed 1st place overall in 2010 by a long shot. 2011 I placed equal 2nd. I also received numerous stage awards.
Willowglen - Ive placed 4th overall and numerous stage awards.

Magazine Coverage
Ive had 4wdaction do an article on the Sierra and it was on the front page of 4wdextreme magazine.

Engine
In 2011 the motor was completely overhauled with the following:
Block was machined and balanced
Brand new head
XR6 turbo injectors
Ceramic coated pistons
T28 turbo with custom exhaust manifold
3 inch dump pipe into 3 inch exhaust
PSC power steering pump with large reservior and aluminium heatsink cooler
Water to air intercooler setup with heat exchanger setup to rear of car
Engine management is through a Haltech E8 ECU
Dynoed and tuned by ESP Racing in Canberra. Very safe tune and rev limited to 5500rpm. Boost is at 12psi.
The motor runs well and has a bucket load of power.

Gearbox
3sp Auto. Had a high clearance crossmember and is cooled through the rear mount radiator. The auto leaks oil when left sitting. I havn't got around to fixing it yet. Drives well otherwise. The vacuum isnt hooked so it shifts hard.

Transfer
6:5:1 trailtough gears that were installed last year.
Has rear disconnect
Rocktoy ring

Diffs
60 series diffs with 4.88 gears
ARB lockers in good condition. Front was just overhauled.
Longfield axles with 80 series drive flanges.
Highsteer pitman arms with upgraded studs.

Wheels
37 inch comp spec trepadors in near new condition.
Rocktoy beadlocks on black steel rims.
Stainless allen key bolts.
2 inch wheel spacers

Suspension
All lower arms are 7075-T6 with 7/8 heim joints. All near new.
3 link front
A frame rear
Front has Radflo remote canister coilovers with eibach springs

Interior and other bits
Has bucket seats with harnesses
Rear mouted radiator
LED Light bar
Warn highmount with brand new 6hp motor and dyneema.
Spotlights across the front
2 x 700cc batteries

Here is a link to the buildup
viewtopic.php?f=4&t=5583&start=60

Heaps of money spent on the motor and also good parts all around.
Heaps more stuff im probably forgetting about.

PM me for any further info or to discuss.

[RIKSTR]

Sad to see it go

[canberramav]

It will be sad.

I'm not even sure if I really want to sell it to be honest. If I dont get decent money for it im happy to keep it.

[Bruce]

Mate if you 100% own it its costing you nothing to keep it. So store it and when things change (and they will) drive it again. Lots of love in that.
I'd be all over this like flies on shit if I was close.

[canberramav]

Bruce wrote:

Mate if you 100% own it its costing you nothing to keep it. So store it and when things change (and they will) drive it again. Lots of love in that.
I'd be all over this like flies on shit if I was close.

Another comp truck is the cost. I can't have 2 of them.

Brisbane ain't that far mate. The guy who bought my last LWB came from brissy and drove it back.

[DarkHorse]

This is seriously engineered for everything except the motor?

[atari4x4]

yeap, quite a few old pics floating around of it with rego plates on it.

[appsie]

this is gettin plenty of interest justin lol

got ppl ringin me bout it? haha

[SierraDan]

People asking me about it too haha.

[canberramav]

Im starting to have separation issues already.

I think ill go out and sleep in the drivers seat for a while......

[sierrajim]

atari4x4 wrote:

yeap, quite a few old pics floating around of it with rego plates on it.

I transferred rego from NSW to VIC before Canberramav bought it from me to take back to ACT.


Separation issues, me too. If I hadn't just bought a 40 series and the wife hadn't just bought a new horse I'd already be on the way up.

[Ethann]

I got texts asking for info about it too haha.

[appsie]

lol its just a cool rig that works. alot of people love it. i know i wish i had it

[canberramav]

Im going to list this on Ebay to get a bit more exposure.

Thanks for helping with the sale guys.

[canberramav]

Just realised I have more spares than i though.

Spares that will go with it are:
diff centre
transfer case
60 power steering box
steering arms
RCI fuel cell
Front complete axles/cv's
rear axle
And all my other assorted Sierra parts

[jimnynutter]

Mate I would F@&$ing love to buy this being a Canberra local, living in Calwell.
Even just getting some seat time in it would put me over the moon on some good tracks

[canberramav]

If your interested in it you can have a drive on some good local tracks.

[jimnynutter]

I could never be able to afford this for another few years.
otherwise I'd be all over this like flies on cow dung

Good luck selling it.

[canberramav]

Looks as if the zook is sold.

Should be taking a deposit for it tomorrow.

It's heading back to Victoria so keep an eye out for it.




I still don't know if I'm ready to say goodbye to it.............its been a bloody good zook.

Time to get and heaps of it.

[appsie]

congrats mate. sad to see it gone tho.

time to look for a new one hey, there comps down vic way?

[31zook]

So what's the new one your looking at?

[foolsp33d]

canberramav wrote:

Looks as if the zook is sold.

Should be taking a deposit for it tomorrow.

It's heading back to Victoria so keep an eye out for it.




I still don't know if I'm ready to say goodbye to it.............its been a bloody good zook.

Time to get and heaps of it.

Forum member?

to the new owner...
Any mention of what the plan is?

[canberramav]

31zook wrote:

So what's the new one your looking at?

I like the old C&D 40 series. In saying that I havn't had really good inspection of it and Im yet to negotiate a price.

I might just hold off until tough truck and see what else is on the market.

[SierraDan]

After tuff truck is when to have money ready.

Not everyone may want to rebuild their car to suit CCDA. Without that compliancy tthey go.cheap.

[canberramav]

This zook is back up for sale if anyone is interested.

The owner is chasing $15 000 for it.

Im not sure of the current condition but it should be close to when I owned it. He never competed in it or anything.

If anyone is interested ill put you onto him.

[corradog60]

Hi mate! Do you know if this rig is still for sale. Have cash waiting. Cheers Dean. My email dean.saunders1@hotmail.com

[5ierra]

http://www.ebay.com.au/itm/Comp-Truck-/ ... 4d173bc915

This things forsale again now. Shame to see it passed round like that...

[Gwagensteve]

And one occasion when "comp truck" means more than roof lights and a cab chop.

Steve.

[joel]

Gwagensteve wrote:

And one occasion when "comp truck" means more than roof lights and a cab chop.

Steve.

dont forget the obligatory tube front bar steve.

[SierraDan]

Love how every pic is from Toperi and looks like Woodpecker. And the description looks like Justins original one