Joined: Thu Mar 15, 2012 4:40 pm Posts: 283 Location: Lowesdale Southern NSW (Close to Albury)
Vehicle: 82 Sierra SWB soft top
Posted: Thu Feb 28, 2013 8:20 pm
Chasing the gear ratios on the 4spd box to suit 1l reason being I would like to find out if my current engine and gbox (4k) will have a higher or lower gear ratio in top gear and also first. First it 5spd 4k box is 3.789:1 5th is 0.865:1 . Trying to determine my gearing needs to run 30s or close too 30 don't plan on going bigger On 1l nt diffs with 1l non switch case. Doug
Joined: Thu Mar 15, 2012 4:40 pm Posts: 283 Location: Lowesdale Southern NSW (Close to Albury)
Vehicle: 82 Sierra SWB soft top
Posted: Thu Feb 28, 2013 9:17 pm
4th gear in the 4k 5spd box is 1:1 so putting it in 4th will have standard gearing just with a motor that has a few more ponies. Using formula I found Ratio 1 - ratio 2 = x X over ratio 1 = percentage drop So 1 - 0.865 = 0.135 0.135 over 1 = 0.135 So that's 13.5% increase ? Maybe wrong.
Users browsing this forum: No registered users and 4 guests
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum