| Author |
Message |
Joshua02
Joined: Mon May 07, 2012 1:44 pm Posts: 63
Vehicle: 96 sierra, 2 inch lift
|
 Posted: Sat Mar 09, 2013 12:26 pm |
|
|
Hey guys, Just brought a tuff dog steering damper, can anyone link me with the way to install it.. or give me some good tech advice
Cheers
|
|
|
|
 |
sideways

az supporter
Joined: Fri Oct 29, 2010 1:53 pm Posts: 5936 Location: Northcliffe, W.A.
Vehicle: LJs, Sierra, Jimny, Swift.
|
 Posted: Sat Mar 09, 2013 1:11 pm |
|
|
Undo the nuts holding the old one, pull it off and then put the new one in its place. It's only 2 nuts. You'l probably have to move the steering around a bit to get the new one in, assuming it's an RTC.
|
|
|
|
 |
Joshua02
Joined: Mon May 07, 2012 1:44 pm Posts: 63
Vehicle: 96 sierra, 2 inch lift
|
 Posted: Sat Mar 09, 2013 1:20 pm |
|
sideways wrote: Undo the nuts holding the old one, pull it off and then put the new one in its place. It's only 2 nuts. You'l probably have to move the steering around a bit to get the new one in, assuming it's an RTC. It doesnt have an old one ??
|
|
|
|
 |
Matthew
Joined: Mon Jun 15, 2009 11:30 pm Posts: 472 Location: S.E. Melbourne
Vehicle: SWB Sierra
|
 Posted: Sat Mar 09, 2013 1:36 pm |
|
|
|
 |
Joshua02
Joined: Mon May 07, 2012 1:44 pm Posts: 63
Vehicle: 96 sierra, 2 inch lift
|
 Posted: Sat Mar 09, 2013 2:16 pm |
|
Matthew wrote: cheers, but i dont have a bracket for the steering arm end and i cant find where the other end bolts onto :/ any ideas ?
|
|
|
|
 |
sideways

az supporter
Joined: Fri Oct 29, 2010 1:53 pm Posts: 5936 Location: Northcliffe, W.A.
Vehicle: LJs, Sierra, Jimny, Swift.
|
 Posted: Sat Mar 09, 2013 2:18 pm |
|
Sorry I assumed you had a real Sierra, not a coily. 
|
|
|
|
 |
Joshua02
Joined: Mon May 07, 2012 1:44 pm Posts: 63
Vehicle: 96 sierra, 2 inch lift
|
 Posted: Sat Mar 09, 2013 2:23 pm |
|
sideways wrote: Sorry I assumed you had a real Sierra, not a coily.  touche!
|
|
|
|
 |
Matthew
Joined: Mon Jun 15, 2009 11:30 pm Posts: 472 Location: S.E. Melbourne
Vehicle: SWB Sierra
|
 Posted: Sat Mar 09, 2013 4:21 pm |
|
|
Did you get the coily kit that includes mounts? Or just the damper?
|
|
|
|
 |
BlueSuzy

az supporter
Joined: Sun May 04, 2008 11:30 pm Posts: 9716 Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB
|
 Posted: Sat Mar 09, 2013 7:52 pm |
|
|
Your going to need a custom bracket
Another option is take it back and say it doesn't fit, And adapt some power steering into her for a few hundred $
_________________ BlueSuzy wrote: I'm over the G16b's.
|
|
|
|
 |
Matthew
Joined: Mon Jun 15, 2009 11:30 pm Posts: 472 Location: S.E. Melbourne
Vehicle: SWB Sierra
|
 Posted: Sat Mar 09, 2013 8:02 pm |
|
|
The coily damper comes with brackets.
|
|
|
|
 |
Joshua02
Joined: Mon May 07, 2012 1:44 pm Posts: 63
Vehicle: 96 sierra, 2 inch lift
|
 Posted: Sat Mar 09, 2013 8:35 pm |
|
|
Ahh I must of gotten the leaf one -.- will take it back on Monday. Cheers
|
|
|
|
 |
stockman

az supporter
Joined: Thu Nov 05, 2009 10:30 pm Posts: 5319 Location: Canberra
Vehicle: 4wd
|
 Posted: Sat Mar 09, 2013 8:49 pm |
|
|
As far as I've seen there isn't a steering dampner for the coily, but there is a RTC stabiliser.
_________________ Watch out or you'll get sued.
|
|
|
|
 |
Matthew
Joined: Mon Jun 15, 2009 11:30 pm Posts: 472 Location: S.E. Melbourne
Vehicle: SWB Sierra
|
 Posted: Sat Mar 09, 2013 8:58 pm |
|
|
|
 |
stockman

az supporter
Joined: Thu Nov 05, 2009 10:30 pm Posts: 5319 Location: Canberra
Vehicle: 4wd
|
 Posted: Sat Mar 09, 2013 9:02 pm |
|
I stand corrected. 
_________________ Watch out or you'll get sued.
|
|
|
|
 |
|