[shark]

Hey guys pretty simple one.
I have bought some 16" tyres to go on the NT sierra.
The biggest offset I can get it - 13

Will that clear everything okay??

[SierraDan]

I have 15x7 -13. With 31x10.5 tyres. The tyres just nick the leaf spring in WT diff WT spring configuration.

Your tyre choice will depend on what clears or not.

[shark]

My tyre is a 30.5" x 9.5".
Bighorns

[SierraDan]

I would say yes It will be fine, steering wise. (Provided you have sufficient lift/tyre clearance.)

As far as i know, the spring spacing and axle width went out by the same amount.

[Ace]

30, 9.5, 16's? or is it a 235 etc 16? Sorry don't want to sound like a dick (again) but just checking its for a 16" rim / sounds expensive - the only 16's id be keen on wld be 235 85

My 30, 9.5 NT on factory rims (-5 I think) scrub on the body near full lock no lift - dont think lift wld fix this

[shark]

245/75R16

[shark]

Random size to try but the price was very good.
I can get good quality king rims very cheap so that's not an issue.

[Matthew]

I've been thinking about 245/75r16s for road tyres.

245/75r16s are nearly identical in od to the majority of 31s, just skinner. IMO a much better size for a Sierra than a 31x10.5, only downside is that the majority of them seem to be load range 'E'.

[SierraDan]

and 31x10.5x15 is a very common and very cheap size.
Nothing wrong with them.

[shark]

I don't think there is anything wrong with that size.
I just got a good deal on mine.
I think i might otherwise for the - 13 16x7

[got_bar_work]

Hope the kings u get are better then the crap steel 15x7 ones that i keep bending lips on

[shark]

What colour is the stripe??
Then I can tell you what brand it is.

[got_bar_work]

Mine are 15x7 +10 kings and i have bent 3 lips now
They realy need more meat on the lip like the rings fat zook weldes on