It is currently Mon Aug 03, 2026 12:57 am
Board index » Talking About Stuff » Suzuki Talk



Post new topic Reply to topic  [ 12 posts ] 
Author Message

Offline

Joined: Fri Feb 03, 2012 1:35 pm
Posts: 58
Vehicle: multiple R32's, wtd sierra

Post Posted: Thu Mar 14, 2013 11:42 am 
Reply with quote Top  
hey guys,

my starter motor on my sierra (g13ba) is on its last legs, i am currently coaxing it to work each time i start the car with some physical enaouragement (read -bashing it with a tire iron)

where is the best place i can get a replacement? wreckers? who is best to go to?

im in western australia

 Profile  

Offline
User avatar

Joined: Thu Jul 16, 2009 11:30 pm
Posts: 3600
Location: Wollongong NSW
Vehicle: LWB Sierra & XL7

Post Posted: Thu Mar 14, 2013 12:16 pm 
Reply with quote Top  
Greg at 4WD Products on ebay ;)

or just go to your local auto elecy or wreckers, apparently mitsu's use the same.

One thing that I have noticed is that there's 2-3 different types of starter motors, Turned out, and very lucky for me it was the same as my Vitara.
viewtopic.php?f=5&t=36170&hilit=starter+motor

_________________
'92 Vitara & Camper trailer

 Profile  

Offline

Joined: Wed Dec 19, 2012 7:43 am
Posts: 685
Vehicle: 85 ' Drover

Post Posted: Thu Mar 14, 2013 1:25 pm 
Reply with quote Top  
Pendign the price of a new one You could get yours reconditioned by a auto electrician.

Not much in them that goes wrong, brushes and bearings and off you go again.

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Thu Apr 29, 2010 8:45 am
Posts: 1230
Location: Brisbane
Vehicle: 91 sierra, g16b,lift,30's

Post Posted: Fri Mar 15, 2013 6:05 am 
Reply with quote Top  
Before you go out and buy a new one. Either make or buy a starter relay. Can be made up with a relay and some quality auto wire and a few insulated crimps. Took me 30mins. That way if its still buggered, your new starter will work 100% all the time lol

 Profile  

Offline
User avatar

Joined: Tue Dec 13, 2011 12:20 am
Posts: 166
Location: Perth
Vehicle: 1985 Sierra Hardtop

Post Posted: Fri Mar 15, 2013 9:27 am 
Reply with quote Top  
yeah as above, just replaced mine but even after replacing it with a new one it needed a relay fitted to make it work properly. after new starter and a relay, she's all good and starts first go and easy as

 Profile  

Offline
User avatar

Joined: Sun Nov 04, 2012 4:37 pm
Posts: 355
Vehicle: 1984 NT High Top

Post Posted: Fri Mar 15, 2013 9:54 am 
Reply with quote Top  
Sent you A Pm mate. Can help if needed

 Profile  

Offline
User avatar

Joined: Tue Aug 08, 2006 11:30 pm
Posts: 5517
Location: Holland Park
Vehicle: Awesome!!

Post Posted: Fri Mar 15, 2013 10:29 am 
Reply with quote Top  
Pull apart, clean it out and see how it goes. Most likely just full of crap and sticky

 Profile  

Offline
User avatar

Joined: Tue Dec 13, 2011 12:20 am
Posts: 166
Location: Perth
Vehicle: 1985 Sierra Hardtop

Post Posted: Fri Mar 15, 2013 10:58 am 
Reply with quote Top  
oh and i bought my new one from Veales. two different types/sizes available though so be careful. turned out mine was for a Drover and had the smaller nose lenght and smaller flange diameter.

part numbers are:
Drover type: STR1043A ( with my trade discount cost me $93 )
Sierra type: STR1119A. ( with my trade discount would have cost me $120 )

quite reasonable prices too as above.... well i think they are reasonable


Last edited by ChrisRinai on Fri Mar 15, 2013 11:02 am, edited 2 times in total.
 Profile  

Offline

Joined: Fri Feb 03, 2012 1:35 pm
Posts: 58
Vehicle: multiple R32's, wtd sierra

Post Posted: Fri Mar 15, 2013 11:01 am 
Reply with quote Top  
thanks guys,
shark thanks for the offer but i will pull this one apart first and see what the deal is.

in regard to a new starter relay, this may sound dumb but can you please explain the starter relay further?

 Profile  

Offline
User avatar

Joined: Sun Nov 04, 2012 4:37 pm
Posts: 355
Vehicle: 1984 NT High Top

Post Posted: Fri Mar 15, 2013 11:26 am 
Reply with quote Top  
Search for clicky starter. Made a big difference for me.

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Thu Apr 29, 2010 8:45 am
Posts: 1230
Location: Brisbane
Vehicle: 91 sierra, g16b,lift,30's

Post Posted: Fri Mar 15, 2013 2:26 pm 
Reply with quote Top  
Either look for sheps clicky starter fix. This will show you how to make one but don't be as dodgy lol. Or you can purchase one off Royce from the business section.

 Profile  

Offline
User avatar

Joined: Tue Dec 13, 2011 12:20 am
Posts: 166
Location: Perth
Vehicle: 1985 Sierra Hardtop

Post Posted: Fri Mar 15, 2013 3:42 pm 
Reply with quote Top  
get a 4 pin spotlight type relay from any auto store and wire it up yourself, took me half an hour to do.

pin # 86 is starter motor solenoid wire ( the original wire that would normally go to the starter solenoid )
pin # 85 is 12v -ve ( negative on battery or chassis ground )
pin # 30 is 12v +ve ( positive on battery )
pin # 87 is to starter motor solenoid

 Profile  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 12 posts ] 

Jump to:  


Who is online

Users browsing this forum: No registered users and 213 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
Untitled Document


Untitled Document


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group :: Style based on FI Subice by phpBBservice.nl :: All times are UTC + 9:30 hours