[datso]

I have a 2008 J20A long Bare motor in excellent condition from an auto SX4
Has injectors, rails, part of wiring and plastic inlet manifold flanges cut 3 inches
off the head was going to use rwd manifold or custom and headers.
no waterpump, alternator, starter totally unopened J20A Long Bare engine.

This engine can suit a vitara 2ltr using rear dizzie head or late ecu using cam sensor
Also J series of this model match the g16b gearbox then need ecu
or any auto vitara gearbox to suit G16b or J series.
Can also use RingR adaptor to suit toyota gearbox

Price:
$800 plus freight
$600 bottom end plus freight
$200 head plus freight

Location: Melbourne northen suburbs
will also swap for good late model Jimny M series gearbox freighted to Melbourne.

[datso]

Jimny gearbox needed for M18a

[datso]

How it would look in a vit with gsxr itbs


First start of one in a vitara
http://www.youtube.com/watch?v=_4OGbDAE5No

also one with stock vitara manifold but megajolt & factory exhaust header

http://www.youtube.com/watch?v=9XqVHIce0_M

[datso]

150hp

[datso]

sold to Adam

[Fatzook]

Can I have some pics of the SX4 motor? I suspect that the sump arrangement is dramaticly different to vitara.

[datso]

Fatzook wrote:

Can I have some pics of the SX4 motor? I suspect that the sump arrangement is dramaticly different to vitara.

This is a vitara sump from the net its not very different in fact the vitara sump is deeper from mid to rear
while the sx4 front hump is bulkier but not dramatically compared to vitara sump depth.
http://www.foo.is/albums/j20a/S2010209.jpg
http://www.foo.is/albums/j20a/S2010202.jpg

here is a manifold for sale on Gummy, a bit steep though
http://www.gumtree.com.au/s-ad/mansfiel ... 1014354449

here is the j20a in a heavy vitara
http://www.youtube.com/watch?v=9XqVHIce0_M

[Fatzook]

Thanks for the pics. But as I suspected, the sump and subsequent bottom block casting ( see the horizontal seam under the oil filter ) is reversed. It may be interchangable with the J20 vitara casting and sump, but it would be a suck it and see situation. I have no idea how much of the motor would need to be stripped to complete this job, but given its proximity t5o the crank I'd say its a bottom end tear down.

With the SX4 sump, this won't fit a vitara, and I'd guess its not much better for a sierra that doesn't have SPOA.

[datso]

The oil pump is exactly the same, just oil pick up and sump & oil pickup stick.

eg.

http://flickrhivemind.net/User/JARYphoto/Interesting

http://www.flickr.com/photos/79046994@N00/3976051746

http://www.flickr.com/photos/79046994@N00/3976051842

http://www.flickr.com/photos/79046994@N00/3976051972

[Fatzook]

datso wrote:

The oil pump is exactly the same, just oil pick up and sump & oil pickup stick.

eg.

http://flickrhivemind.net/User/JARYphoto/Interesting

http://www.flickr.com/photos/79046994@N00/3976051746

http://www.flickr.com/photos/79046994@N00/3976051842

http://www.flickr.com/photos/79046994@N00/3976051972

What is all this stuff for? Are these pics of a vit/ GV J20? Or are the supposed to be the SX4 J20?

[datso]

sold now

[datso]

sold now

[datso]

conversion done to sierra by NSW owner

http://www.suzuki4wd.com.au/forumvb/sho ... A-for-sale

[atari4x4]

i'm guessing it would have been out of a SV or SQ rather than a SX4, but it doesn't say.

trying to find the bits to convert it to rear sump etc might be hard to get without buying a motor. do these things run a cam position sensor at the rear of the head on the LHS like the SV & SQ's?

[datso]

sold now

[datso]

sold now

[datso]

sold now

[bohuler]

Will this bolt directly into my 2000 GV do you know? I have valve noise and a couple of gremlins that are going to take alot of time to fix and might be easier to just take the bare motor and bolt all my early gv electronics and shit to it and drop it back in then rebuild teh orginal motor with some go fast bits If it wil drop straight in i will take it this week
Dave

[datso]

sold now

[datso]

sold now

[datso]

sold now

[AdamC]

Hi do you still have the engine?

[datso]

Adam called you and left a message, I also have as mentioned I think earlier I have a complete J18 engine from a gtx baleno that was crashed but kept for interchangeability and spare head for porting in case I built a hotty later on.

[datso]

sold now to Adam