| Author |
Message |
KEENSY85
Joined: Wed May 09, 2012 12:46 am Posts: 1742 Location: north brisbane
Vehicle: 1985 lwb sierra UTE
|
 Posted: Sat Mar 16, 2013 6:42 pm |
|
|
Hey guys pm if u need Sierra parts I v got lots of bits and peices
Chassis (RUF WIITH HILUX TOWERS) make an offer,
1.3l motor rebuilt by peach performence at Stafford since rebuild it has only done about 10,000 km it goes very well. (It comes with alternator extractors and full tail pipe ) $500. Ono
I will post pics of the motor and chassis just pm me and ill try and help u please no smart ass crap please
Last edited by KEENSY85 on Fri Mar 29, 2013 3:33 pm, edited 1 time in total.
|
|
|
|
 |
KEENSY85
Joined: Wed May 09, 2012 12:46 am Posts: 1742 Location: north brisbane
Vehicle: 1985 lwb sierra UTE
|
 Posted: Sun Mar 17, 2013 12:24 pm |
|
|
Fuel tank -sold Engine -sale pending
|
|
|
|
 |
Ca18det zook
Joined: Sun Mar 03, 2013 5:27 pm Posts: 44
Vehicle: Ca18det ute 2"lift 31s
|
 Posted: Sun Mar 17, 2013 6:34 pm |
|
|
Hey do you have a front drive shaft Cheers
|
|
|
|
 |
KEENSY85
Joined: Wed May 09, 2012 12:46 am Posts: 1742 Location: north brisbane
Vehicle: 1985 lwb sierra UTE
|
 Posted: Sun Mar 17, 2013 7:13 pm |
|
I have a nt drive shaft 
|
|
|
|
 |
KEENSY85
Joined: Wed May 09, 2012 12:46 am Posts: 1742 Location: north brisbane
Vehicle: 1985 lwb sierra UTE
|
 Posted: Sun Mar 17, 2013 7:14 pm |
|
|
And engine is still for sale
|
|
|
|
 |
Daves4wd

az supporter
Joined: Fri Aug 26, 2011 3:17 pm Posts: 1286 Location: Melbourne
Vehicle: Swb Sierra twin lock 32s 6.5s
|
 Posted: Sun Mar 17, 2013 9:00 pm |
|
|
Just a qeustion what year are the hilux towers?? And what's the hight of them?? Looking at making or buying some for the Zook cheers matey
|
|
|
|
 |
Gilmoregirl
Joined: Mon Feb 04, 2013 8:49 pm Posts: 17
Vehicle: 88 SWB Sierra
|
 Posted: Mon Mar 18, 2013 1:08 pm |
|
|
can you please send me a picture of the chassis? thanks
|
|
|
|
 |
KEENSY85
Joined: Wed May 09, 2012 12:46 am Posts: 1742 Location: north brisbane
Vehicle: 1985 lwb sierra UTE
|
 Posted: Mon Mar 18, 2013 4:44 pm |
|
  Comes with no other parts or front clip just bare
|
|
|
|
 |
KEENSY85
Joined: Wed May 09, 2012 12:46 am Posts: 1742 Location: north brisbane
Vehicle: 1985 lwb sierra UTE
|
 Posted: Mon Mar 18, 2013 5:03 pm |
|
|
I also have a pretty good bonnet as well
|
|
|
|
 |
KEENSY85
Joined: Wed May 09, 2012 12:46 am Posts: 1742 Location: north brisbane
Vehicle: 1985 lwb sierra UTE
|
 Posted: Tue Mar 19, 2013 6:37 am |
|
|
|
 |
runtbase
Joined: Wed Nov 04, 2009 10:30 pm Posts: 223 Location: Bundaberg
Vehicle: Serria
|
 Posted: Wed Mar 20, 2013 8:07 am |
|
|
I am after steering box and drag link. Price ???
|
|
|
|
 |
KEENSY85
Joined: Wed May 09, 2012 12:46 am Posts: 1742 Location: north brisbane
Vehicle: 1985 lwb sierra UTE
|
 Posted: Wed Mar 20, 2013 8:40 am |
|
|
$50 for steerbox seems in good nick no drag link Atm sorry
|
|
|
|
 |
KEENSY85
Joined: Wed May 09, 2012 12:46 am Posts: 1742 Location: north brisbane
Vehicle: 1985 lwb sierra UTE
|
 Posted: Fri Mar 22, 2013 5:52 am |
|
|
Steer box still for sale Atm and lots of other bits motor sold
|
|
|
|
 |
KEENSY85
Joined: Wed May 09, 2012 12:46 am Posts: 1742 Location: north brisbane
Vehicle: 1985 lwb sierra UTE
|
 Posted: Sun Mar 24, 2013 11:04 am |
|
I also have some nice sunraser rims (whight) for $150 for x 4 .will post pics this arvo,. Also I have 4 x 235/75/r15 tyres for sale there pretty new they have only done a couple of thousand kms I'm open to reasonable offers there on mazda 6 stud rims so u will have to get them fitted to ur car. Pics will be up tonight. 
|
|
|
|
 |
KEENSY85
Joined: Wed May 09, 2012 12:46 am Posts: 1742 Location: north brisbane
Vehicle: 1985 lwb sierra UTE
|
 Posted: Sun Mar 24, 2013 4:23 pm |
|
   2 are all Terrain special and 2 are BF Goodrich All Terrain 235/75R15 all pretty much brand new all exactly the same size I would like $200 ***** SOLD SOLD***
Last edited by KEENSY85 on Sun Mar 24, 2013 6:30 pm, edited 1 time in total.
|
|
|
|
 |
KEENSY85
Joined: Wed May 09, 2012 12:46 am Posts: 1742 Location: north brisbane
Vehicle: 1985 lwb sierra UTE
|
 Posted: Sun Mar 24, 2013 4:24 pm |
|
 No dings pretty good condition $150 for x 4
|
|
|
|
 |
KEENSY85
Joined: Wed May 09, 2012 12:46 am Posts: 1742 Location: north brisbane
Vehicle: 1985 lwb sierra UTE
|
 Posted: Sun Mar 24, 2013 4:25 pm |
|
 $40 with key all everything works
|
|
|
|
 |
KEENSY85
Joined: Wed May 09, 2012 12:46 am Posts: 1742 Location: north brisbane
Vehicle: 1985 lwb sierra UTE
|
 Posted: Sun Mar 24, 2013 4:28 pm |
|
 $130 Holden astra seats I had removed my seat mounts and was going to use these in my green zook build but I am not needing them know there in super good condition and are super comfy (real leather ) *****SOLD SOLD SOLD*******
Last edited by KEENSY85 on Thu Apr 04, 2013 8:30 pm, edited 1 time in total.
|
|
|
|
 |
KEENSY85
Joined: Wed May 09, 2012 12:46 am Posts: 1742 Location: north brisbane
Vehicle: 1985 lwb sierra UTE
|
 Posted: Sun Mar 24, 2013 4:30 pm |
|
|
|
 |
KEENSY85
Joined: Wed May 09, 2012 12:46 am Posts: 1742 Location: north brisbane
Vehicle: 1985 lwb sierra UTE
|
 Posted: Sun Mar 24, 2013 4:32 pm |
|
I want a Carton of tooheys new for both all clusters work 100%  
|
|
|
|
 |
KEENSY85
Joined: Wed May 09, 2012 12:46 am Posts: 1742 Location: north brisbane
Vehicle: 1985 lwb sierra UTE
|
 Posted: Sun Mar 24, 2013 4:54 pm |
|
Old seats out of my first zook they are comfy as but preiviouse owner fitted them with dogy seat rails make an offer  
|
|
|
|
 |
KEENSY85
Joined: Wed May 09, 2012 12:46 am Posts: 1742 Location: north brisbane
Vehicle: 1985 lwb sierra UTE
|
 Posted: Mon Mar 25, 2013 6:37 pm |
|
|
|
 |
KEENSY85
Joined: Wed May 09, 2012 12:46 am Posts: 1742 Location: north brisbane
Vehicle: 1985 lwb sierra UTE
|
 Posted: Fri Mar 29, 2013 3:38 pm |
|
 Brand new heavy duty clutch kit for a 85/96 suzuki Sierra (f1 stage III ) $180 *****SOLD SOLD SOLD *******
Last edited by KEENSY85 on Fri Mar 29, 2013 5:48 pm, edited 2 times in total.
|
|
|
|
 |
KEENSY85
Joined: Wed May 09, 2012 12:46 am Posts: 1742 Location: north brisbane
Vehicle: 1985 lwb sierra UTE
|
 Posted: Fri Mar 29, 2013 3:42 pm |
|
 Aluminum roll bar it appears to be 3" tube it looks to be in great condition and is of a suzuki Sierra it may fit a Jimmy I'm not sure *******SOLD SOLD SOLD********
Last edited by KEENSY85 on Fri Mar 29, 2013 5:46 pm, edited 1 time in total.
|
|
|
|
 |
rockcrawlerdude
Joined: Thu Apr 05, 2012 7:30 pm Posts: 298
Vehicle: 1985 LWB sierra
|
 Posted: Fri Mar 29, 2013 4:24 pm |
|
|
WT steering links ( both links ) Including tie rods?
|
|
|
|
 |
KEENSY85
Joined: Wed May 09, 2012 12:46 am Posts: 1742 Location: north brisbane
Vehicle: 1985 lwb sierra UTE
|
 Posted: Fri Mar 29, 2013 5:45 pm |
|
|
|
 |
KEENSY85
Joined: Wed May 09, 2012 12:46 am Posts: 1742 Location: north brisbane
Vehicle: 1985 lwb sierra UTE
|
 Posted: Fri Mar 29, 2013 5:59 pm |
|
|
-I still have a perfect tail gate.
-I also have two targa bars I'm willing to do rust repairs on if any one needs them I can also paint them for a additional cost if u supply the paint .
-I'm interested in selling the chassis for $100 or neerest offer (it has a well soughted ruf with hilux towers )
-I have a set of nt rims with legal tread for $100 (205/75/R15 I will put photos of wheels up tomorrow
|
|
|
|
 |
boost=money
Joined: Sun Aug 16, 2009 11:30 pm Posts: 240 Location: brisbane
|
 Posted: Fri Mar 29, 2013 7:57 pm |
|
|
is the chassis swb wt?or nt?
|
|
|
|
 |
rockcrawlerdude
Joined: Thu Apr 05, 2012 7:30 pm Posts: 298
Vehicle: 1985 LWB sierra
|
 Posted: Fri Mar 29, 2013 8:25 pm |
|
|
How much for the tail gate and a targa bar?
|
|
|
|
 |
KEENSY85
Joined: Wed May 09, 2012 12:46 am Posts: 1742 Location: north brisbane
Vehicle: 1985 lwb sierra UTE
|
 Posted: Fri Mar 29, 2013 9:17 pm |
|
boost=money wrote: is the chassis swb wt?or nt? Nt mate
|
|
|
|
 |
|