[4wdbuyer]

Hi Guys,

I have a number of parts that I am ready to part with,

1. Rebuilt 1 Lt Transfer case with 1.3Lt flanges, done no more than 100k’s, only selling because we needed lower gears for 33’s. Great transfer case, really tight. - $350

2. Four point roll bar - $50

3. Rear bench seat in great condition, no tears with latch and bracket - $100

4. Nissan 180sx front bucket seats on sierra runners, slightly modified but would take to much to get them in, again great nic & no tears - $100

5. LH door - $50

6. RH Door - $50

7. Windscreen surround, a little rust under centre windscreen wiper and a little kink in left bottom corner - $100

9. Full set of WT wheel arch flares, good nick very strait - $150

10. 1 left front or right rear WT wheel arch flare a little beaten up - $25

11. 1.3 Lt transfer in working order, without flanges - $75

12. Three speedo clusters,
1. 74688 k’s - $40
2. 281213 k’s - $30
3. 263541 k’s – slight crack in screen - $20

13. Speedo Cable - $50
.
14. Ignition barrel, good nic, two keys - $40

15. 1.3Lt distributer - $20

16. Soft top spare tyre holder - $15

18. Soft top B pillar hoop has a couple of small cracks in the usual spot where they bolt together - $40

19. Soft top B pillar hoop in good nic -$50

20. 10 inch thermo fan - $15

21. Steel fair lady, not the roller type - $25

I’d prefer contact via text or phone on 0403 703 157. I have pics on my phone if you want I can msg them to you.

Make an offer on anything first in best dressed.

Cheers
Dale

[hass]

Are the L&R guards still available? What colour?

[Chester]

Photo's of the 180 seats?

[hass]

Does the rebuilt t-case have a 4x4 switch?

[Junior_91]

Are the parts in Brisbane or both places? May have some use for some of your parts.

[Phattime]

Pm sent

[toastysteve]

Very interested in the 4pt roll bar, but need to be clear that it's for a SJ70 WT?
Ahh, just read the whole thing. Will send you a txt.

[4wdbuyer]

Chester - PM me your mobile number & I can send photo's

Hass - the Guards have been sold, and yes, the T-case has a 4x4switch so can go straight into a 1.3L for gear reduction.

Junior - The parts are in Dalby, but i will be in brisbane tomorrow to bring some parts down. Let me know what you are keen on! Otherwise, you can pick them up from a mates place at Kippa-Ring on the north side of brissie

[4wdbuyer]

Hey all - I am probably coming in to brisbane this afternoon so if you want me to bring anything give me a call!
0403703157

Cheers
Dale

[hass]

pm'd mate

[charged88]

Would you want to freight the transfer? if so price to 3121 Vic.
Cheers
Lewis

[4wdbuyer]

Yeah could freight the transfer ill pm the freight cost.

[boost=money]

any pics of roll bar? 0413353842

[4wdbuyer]

Pic texted