Hi Guys,
I am thinking about switching to a flashy set of speedy wheels for road use, they are 15x7 alloys with a negative 13 offset.
Currently have 15x6 Sunrasias on our '94 WT LWB Stockman running 205/70/15 tyres (ie pretty standard). I think these are supposed to be +10 offset, at least that is the spec for the 5.5" wheels... correct this if its wrong for the 6"...
Question is, using the same profile tyres on the Speedy wheels, will there be any rubbing?
From my calcs the wheels should have 10mm more clearance on the inside and hang out 36mm on the outside. Has anybody used these wheels on a zuki without a lift?
Also, how far outside standard specs can you go without munching wheel bearings?
Cheers,
MrC