auszookers.com • View topic - Are you doing G16B Baleno Transplant??? This might help.

Board index » Talking About Stuff » Suzuki Talk

Are you doing G16B Baleno Transplant??? This might help.

Page 1 of 1

[ 7 posts ]

Print view

Previous topic | Next topic

Author

Message

Bretski

Joined: Fri Mar 15, 2013 8:32 pm
Posts: 207
Location: Brisbane - Mango Hill
Vehicle: Vitara 1990 SWB Soft Top

Posted: Thu Jul 18, 2013 2:26 pm

Hi Guys

I'm a bit of an EvilBay Junkie and probably spend way too much time browsing and searching.

I found this the other day and thought it might be very useful to anyone doing or considering an engine transplant using a G16B from a Baleno.

From what I can gather this will make the engine work without the need for the Dash etc from the donor vehicle. But I could be wrong too... :lol:

Anyway - Here's the link
http://www.ebay.com.au/itm/261110267842 ... 1423.l2649

Gwagensteve

Joined: Thu Feb 26, 2009 10:30 pm
Posts: 12997
Location: Melbourne

Posted: Thu Jul 18, 2013 2:33 pm

Yeah- that guy is well known- killa kustom kables.

You don't need any part of the dash for a baleno or gti swap, just an engine loom and a vss.

Steve.

Bretski

Joined: Fri Mar 15, 2013 8:32 pm
Posts: 207
Location: Brisbane - Mango Hill
Vehicle: Vitara 1990 SWB Soft Top

Posted: Thu Jul 18, 2013 3:01 pm

It would make for a much easier transplant and save a lot of headaches thats for sure.

Gwagensteve

Joined: Thu Feb 26, 2009 10:30 pm
Posts: 12997
Location: Melbourne

Posted: Thu Jul 18, 2013 4:55 pm

Maybe. Wiring an engine loom isn't hard and it's nothing to be afraid of. I wouldn't buy an engine without a computer or loom, because there are too many small variations. If you have the computer and loom there's no real mystery to getting it into the car. I probably would pay money for the g16b-aw-4 loom though, because the transmission loom is integrated into the body loom and can't be easily lifted out.

Steve.

Fatzook

az supporter

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Posted: Thu Jul 18, 2013 10:54 pm

Gwagensteve wrote:

I probably would pay money for the g16b-aw-4 loom though, because the transmission loom is integrated into the body loom and can't be easily lifted out.

Steve.

yes it can. Same process as the engine harness. Just keep weeding out all the shit until you have a clean TCM harness. :wink:

_________________
2013 GV
1998 SV420 ute

Shifty

newbie

Joined: Mon May 20, 2013 11:19 pm
Posts: 3
Vehicle: Suzuki SJ80

Posted: Wed Aug 28, 2013 9:44 pm

Just to throw in a random question regarding the transplant... I'm doing an SJ80 conversion using a JLX Vitara motor (loom getting done by killa kustom kables) but can't seem to find the where/how to mount the VSS on my cluster as it looks different to all the other ones I've seen :/

Gwagensteve

Joined: Thu Feb 26, 2009 10:30 pm
Posts: 12997
Location: Melbourne

Posted: Thu Aug 29, 2013 8:32 am

Maybe take a photo of the back of the cluster and post it here. I'm not familiar with the coil cluster, but I'm willing to bet it has provision for the VSS.

I have a coil cluster at home, I'll have a look maybe tonight and see what I can tell you.

Steve.

Page 1 of 1

[ 7 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: No registered users and 74 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum