[Santos]

COLEMAN Dual fuel Lantern with original box $35
Probably only used once in since new, approx 15 years old, runs on petrol or coleman fuel (turps) still has $125 price tag on retail box and has a packet of gas mantles

COLEMAN Dual fuel twin burner stove $75
Clean, near new nly used a handful of imes. Petrol/Coleman fuel

----

80L Lemair mini fridge $50
(twin crisper suit single bachelor or as a bar fridge)

New 800w Inverter (used less than 5 minutes Modified sinewave) $50 posted australia wide

------
NEW/NOS G13 8v STD 74mm Flat top pistons NO RINGS (4x) $40 posted (can include used sierra rods with extra used pistons $10)
----

Update. I have 4 G13 8v heads and 3 engine blocks (1x G13A, 1x G13BA, 1x G13B)I you need any components or parts (eg rods, valves, complete heads, bare block etc ) for 8v 1.3L shoot me a PM. They are free providing you pick it up or pay for postage i can't bare to scrap useful parts.

The exception is the g13b forged crank which will need machining but is $20

----------
Suzuki baleno multi-rib altenator, 55A (suit g16 engines) $20
Suzuki Vitara V6 LWB Disc/rotors to suit 16" wheel $100 --> NOW $80

----

140A Cigweld stick welder $60 including 20 weld rods
(needs electrode holder which are $15 on ebay or at bunnings, can supply a new Cigweld one for $36)


---
2x black ninja swords $35 for the pair plus post

---



----
Pick up northern beaches, sydney. Post at buyers expense (3kg prepaid satchel?)

Seth 0414810942 or PM me here

[Santos]

bump, added timing light ($25 posted)

[Santos]

merge my stray items, will be adding to it rather than starting new threads all the time

[Santos]

timing light, dwell tacho, compression gauge sold pending payment. If you where interested in it just send me a pm and i will put you in queue if falls through.

[Santos]

added the 2nd largest swiss army knife in the world, the largest is the Wenger Giant.

[Santos]

XAVT now on ebay
http://cgi.ebay.com.au/ws/eBayISAPI.dll ... 843wt_1137

140A Cigweld welder with 20welding rods $65
needs electrode holder, can supply one to test unit.

[Santos]

added v6 vit brakes

[Santos]

Added: Genuine Maglite with Led Upgrade.
Gives a nice clean white light, has spare incadescent in the buttstock which you will probably never need since the led is rated 20 000 hrs.
Takes 2x C size batteries. Recommend you get the AA->C batteries adaptor off ebay so you can just use AA rechargeables. With 2xAA 2000mah in adaptors i have got a recorded 27 hours run time... much better than the factory 3 hour weak light incadescent!

$22 posted australia wide

[Santos]

Added:
Snap-on Gm70M 1/4" ratchet + 2 extension bars (150mm + 50mm) $35 posted australia wide

[Santos]

G13/g16 8v sports exhaust system. Complete Extractors+Catconverter+muffler to suit Sierra 1.3l models (fits both 1.3/1.6l engines) $100.
Cheaper than getting just the extractor neew on ebay.. less mucking around just bolt in!

[Santos]

Added 12v battery charger (mains 240v)

[Santos]

added photos of exhaust system

[camskea]

Any chance of posting the exhaust+extractors to 3109 melbourne

[Santos]

camskea wrote:

Any chance of posting the exhaust+extractors to 3109 melbourne

Find a freight depot that is within 10kms of brookvale, Sydney nsw 2100 and I will drop it off to them if their quote works out for you. Haven't got time to do the leg work myself.

[camskea]

I'll do some ringing.
Can you give me the weight and approx length of the separated pieces?
It does fit a 1.6 vitara right?

[camskea]

1.6 carby vitara...?

[Scrawny]

camskea wrote:

1.6 carby vitara...?

Yes, it will fit yours

[Scrawny]

Awaiting pm reply too Santos

[Santos]

camskea wrote:

I'll do some ringing.
Can you give me the weight and approx length of the separated pieces?
It does fit a 1.6 vitara right?

Its welded all in one piece. The extractors would fit a vitara. If I cut it up you could probably reuse the all parts to make an exhaust system with new pipe that will suit a vitara. If that's your intention I will go get the measuring tape. As one piece now I have no idea if it would line up under a vitara

Scrawn wrote:

Awaiting pm reply too Santos

Yeah just need to get my camera and stuff, thought I send you some 'extra' photos of stuff.

[Scrawny]

Santos wrote:

As one piece now I have no idea if it would line up under a vitara

It'll have no chance of fitting a Vit as it is. Better off just sending extractors, cat and muffler

[Santos]

Rough measurements final value is thickness and are estimates

Extractors 60cmx60cm x20cm
Muffler 60cm x25cmx 25cm
Cat-converter 35cmx20cmx20cm

If I cut it up I could probably fit it in a box that will go through auspost.

$52.30 is the biggest box with 20kg using online estimator. The max they will post. I don't think It will weigh that much but I can stand on scales tomorrow holding it to get the weight.

[Santos]

added spring bush kit

Snapon-1/4ratchet+bars & 3d Maglite SOLD

[camskea]

Would you sell the extractors separetly ?

[Santos]

camskea wrote:

Would you sell the extractors separetly ?

sure $80 and I will cut it for free

[Santos]

added photo of Stick welder

[Blkzuk]

Hi santos
I'll get the battery charger off ya if you still got it
Cheers mate

[Santos]

complete 8v sport exhaust system sold.

[Blkzuk]

Pm sent

[Santos]

bump ADDED FREE STUFF

[Santos]

new old stock pistons + rings $80posted