[jonga]

whats the go with thse 2 inch suspersion lift with washer spacers or something. are they legitimate in queensland and alright for use?

[nick.gooding]

Are they the same as coil spacers.

[jonga]

yeah, they legal whats the go, they work fine? just need them for a 2 inch lift?

[atari4x4]

they're not coils spacers officer, they are anti static rings....

[sneakydust]

jonga is nub..

dont you have a sierra jonga? what year model?

[Bruce]

atari4x4 wrote:

they're not coils spacers officer, they are anti static rings....

bwhahahahaa That's an old saying now.

[royce]

bwahahahaha I remember that

they arent legal, youd be hard pressed to get pulled up for em though
real springs are always better, but dearer

[Ridge]

you will not fit 2" spring spacers on the standard front struts they are not long enough. you might be able to fit them on the rear though.

a 2" bl would be way easier and cheaper

i have 35mm spacers on the front of mine to correct the sag from winch etc, i am using the 2" ultima lit of ebay.

[jonga]

they go on ebay for about 30 bucks a pair of 30mm so if it were to work i could get two pairs for 60 but a body is 210, wouldnt mind ordering some 2 inch ones, so they wouldnt fit?

[Ridge]

no way i tried awhile ago with just 25mm spacers, the front struts are too short.

[jonga]

http://www.gwynlewis4x4.co.uk/page54a.html

they say, their's can fit onto front axle without the shock toping out, so if i were to find ones like these?

"2 inch suspension lifters (spring spacers) 1 inch also available


These 2 inch spring spacers bolt onto your axle giving an instant 2 inch of lift, the front ones allow the shock to bolt onto its original mounting on the axle which means you can fit a STD,+2 or even our CHALL shocks without the shocks toping out which is a known problem with many other front


spring spacers because they lift the shock 2 inches as well as the spring and there is also plenty of room for the shock to move right to left and front to back on extreme articulation.


They come with all bolts, nuts and washers required to fit them


Cost £15.33 each + vat


Prices subject to change please ring for exact quotation."

photos are on there.

[Ridge]

none of that stuff is for a coily zook.
it is for defenders, discos and range rovers.
look at the pics of the spacer thing, it is not a zook diff

[Bruce]

I make spacers from 10mm to 50mm for coily's.
Been selling spacers for years to lots of 4wd shops

Also make spacers for lots of other 4wds as well.
But don't tell Joe

[jonga]

ahh really bruce, would 50mm spacers fit on a stock coily? if so i may be interested in buying some

[Bruce]

Not if your running stock springs and shocks mate. I would not go higher than 30mm.
I'm in Brisbane and you are more than welcome to PM me if you want.

ODA1 also does a bit with them as well. He is also in Brisbane.

[sneakydust]

sneakydust wrote:

jonga is nub..

case rested

[atari4x4]

sneakydust wrote:

sneakydust wrote:

jonga is nub..

case rested

coming from you thats gold!