auszookers.com • View topic - Sierra G16B extractors

Board index » Talking About Stuff » N00b Talk

Sierra G16B extractors

Page 1 of 1

[ 10 posts ]

Print view

Previous topic | Next topic

Author

Message

azzas15

Joined: Thu Jul 25, 2013 7:43 pm
Posts: 355
Vehicle: 89 Sierra Widetrack

Posted: Tue Sep 10, 2013 4:23 pm

Hey Gents,

Had a look around and did some searches but I seem to find more info just on the flanges. Just in the process of doing a g16B swap using one from a Baleno and just thinking about the exhaust. I found these extractors on eBay but they note its for a sierra with a Vitara G16B I assume they would be similar bit would they suit a Baleno G16B? Link below

http://bit.ly/13DDShK

Cheers,
Azza

atari4x4

az supporter

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34843
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Posted: Tue Sep 10, 2013 4:25 pm

they're essentially the same motor apart from the baleno intake differs, pretty sure they are the ones that everyone uses for G16b powered sierra's.

_________________
You're just hating because you don't understand

azzas15

Joined: Thu Jul 25, 2013 7:43 pm
Posts: 355
Vehicle: 89 Sierra Widetrack

Posted: Tue Sep 10, 2013 4:57 pm

Sweet. Thanks for the quick reply.

Payday this Friday so i will be buying this and a new set of body mounts

Cheers
Azza

coily96

az supporter

Joined: Wed May 05, 2010 11:50 am
Posts: 823
Location: Beenleigh
Vehicle: Coil Sierra

Posted: Wed Sep 11, 2013 8:29 pm

MPH are quick with postage and ive had my set for a few years and had no problems.

Wazz

Joined: Sun Apr 17, 2011 7:27 am
Posts: 210
Location: Keilor
Vehicle: 92 tintop sierra

Posted: Thu Sep 12, 2013 8:57 pm

I had issues with them. Ended up buying some off low range. Heaps better.

atari4x4

az supporter

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34843
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Posted: Thu Sep 12, 2013 9:08 pm

in MPH's defence, you seem to have issues with everything... brake lines, PS brackets, headers, steering arms, etc, etc.

_________________
You're just hating because you don't understand

azzas15

Joined: Thu Jul 25, 2013 7:43 pm
Posts: 355
Vehicle: 89 Sierra Widetrack

Posted: Fri Sep 27, 2013 10:46 am

Got the extractors yesterday and they are well made for $200

stockman

az supporter

Joined: Thu Nov 05, 2009 10:30 pm
Posts: 5319
Location: Canberra
Vehicle: 4wd

Posted: Fri Sep 27, 2013 10:58 am

I had a set from Rod too.
I asked for a custom setup comprising of Sierra extractors on a Vitara flange with a o2 bung. (well before he offered them as a set)
Was really disappointed with what I got. The flange was roughly cut, the pipes themselves wanted to sit 10mm into my engine mount and the whole thing seemed very freehand.

I hope now that he is offering this as a complete unit he has a jig setup and is pumping out quality not kwality.

_________________
Watch out or you'll get sued.

Gwagensteve

Joined: Thu Feb 26, 2009 10:30 pm
Posts: 13002
Location: Melbourne

Posted: Fri Sep 27, 2013 11:24 am

I have used wildcat and lukey extractors without a problem. A tiny but of engine mount flange grinding on the removable bracket that sits in the chassis.

Steve.

azzas15

Joined: Thu Jul 25, 2013 7:43 pm
Posts: 355
Vehicle: 89 Sierra Widetrack

Posted: Fri Sep 27, 2013 12:53 pm

Hi guys,

Sorry to hear stockman. Photos below of the current flanges. Only have to grind a couple of mm off the bent engine mount

Page 1 of 1

[ 10 posts ]

Board index » Talking About Stuff » N00b Talk

Who is online

Users browsing this forum: Google [Bot] and 13 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum