| Author |
Message |
Rossco
Joined: Fri May 28, 2010 10:28 am Posts: 529 Location: Townsville, QLD
Vehicle: 91 WT 1.6EFI
|
 Posted: Fri Nov 15, 2013 6:35 am |
|
|
I have been hanging on to this but plans have changed and I need the money to fund my new mountain bike purchase.
sierra transfer case with: -series 3 rockhopper gears installed (6.1s) -rocktoy ring - lifting blocks, I think they are 1" I will measure them -gear lever is reshaped to work with a 2" body lift - drive shaft hand brake -breather hose (hose clamp, not tapped)
I purchased this lightly used from the previous owner. He ran it in his car for a few months and then put it in a race setup which never ran. I have seen them run in his car but never fitted it to mine. I am in Townsville FNQ so happy to package it and get it to a depot for postage. Looking for $600.
|
|
|
|
 |
MikeyS
Joined: Mon Jan 14, 2013 10:24 am Posts: 202 Location: QLD
Vehicle: 98 Jimny
|
 Posted: Fri Nov 15, 2013 8:26 am |
|
|
Hi Rossco do you know how much it would be to post the transfer case to Noosa 4565 QLD.
how much does the transfer case weigh ?
|
|
|
|
 |
Rossco
Joined: Fri May 28, 2010 10:28 am Posts: 529 Location: Townsville, QLD
Vehicle: 91 WT 1.6EFI
|
 Posted: Fri Nov 15, 2013 10:32 am |
|
|
Ill get it on the scale and have a look for you this arvo after work.
|
|
|
|
 |
31zook
Joined: Tue Mar 24, 2009 10:30 pm Posts: 9242 Location: maito
Vehicle: <3 Edna <3
|
 Posted: Fri Nov 15, 2013 10:44 am |
|
|
Ill buy just the rock toy ring off you if you want.
|
|
|
|
 |
Rossco
Joined: Fri May 28, 2010 10:28 am Posts: 529 Location: Townsville, QLD
Vehicle: 91 WT 1.6EFI
|
 Posted: Fri Nov 15, 2013 5:43 pm |
|
|
I would prefer sell it all together but I'll keep you in mind if things get sold separately.
|
|
|
|
 |
31zook
Joined: Tue Mar 24, 2009 10:30 pm Posts: 9242 Location: maito
Vehicle: <3 Edna <3
|
 Posted: Fri Nov 15, 2013 6:10 pm |
|
|
|
 |
Daves4wd

az supporter
Joined: Fri Aug 26, 2011 3:17 pm Posts: 1286 Location: Melbourne
Vehicle: Swb Sierra twin lock 32s 6.5s
|
 Posted: Fri Nov 15, 2013 8:51 pm |
|
31zook wrote: Ill buy just the rock toy ring off you if you want. If he dose sell it there's a bloke on eBay selling a ring for a sierra case $40 from memory
|
|
|
|
 |
31zook
Joined: Tue Mar 24, 2009 10:30 pm Posts: 9242 Location: maito
Vehicle: <3 Edna <3
|
 Posted: Sat Nov 16, 2013 12:14 am |
|
Yeah I know Design Fab make em, if he wanted bugger all for it I would snap it up 
|
|
|
|
 |
Asps91
Joined: Mon Apr 08, 2013 2:23 pm Posts: 120 Location: Sydney
Vehicle: Suzuki jimny, WT sierra, GTR.
|
 Posted: Sat Nov 16, 2013 6:30 pm |
|
|
Would you post? Very keen!
|
|
|
|
 |
Rossco
Joined: Fri May 28, 2010 10:28 am Posts: 529 Location: Townsville, QLD
Vehicle: 91 WT 1.6EFI
|
 Posted: Sat Nov 16, 2013 10:43 pm |
|
|
Ya mate what's your post code ill have a look at freight costs for you.
|
|
|
|
 |
Asps91
Joined: Mon Apr 08, 2013 2:23 pm Posts: 120 Location: Sydney
Vehicle: Suzuki jimny, WT sierra, GTR.
|
 Posted: Sun Nov 17, 2013 10:31 am |
|
|
2121. Will the t case work fit you reckon without the body lift? Is it a wt case?
|
|
|
|
 |
Rossco
Joined: Fri May 28, 2010 10:28 am Posts: 529 Location: Townsville, QLD
Vehicle: 91 WT 1.6EFI
|
 Posted: Sun Nov 17, 2013 11:13 am |
|
|
$65 to you door or $48 to the depot in Villawood with e-go. I couldn't get it to fit because of the rocktoy ring. I could stand corrected thought if someone has gotten the rocktoy ring to fit without a body lift. if not then you can take it off and use the stock mounts. ya its a WT case
|
|
|
|
 |
Asps91
Joined: Mon Apr 08, 2013 2:23 pm Posts: 120 Location: Sydney
Vehicle: Suzuki jimny, WT sierra, GTR.
|
 Posted: Sun Nov 17, 2013 12:40 pm |
|
|
Can you send e some pics of the t case hand brake? 0404111174
Shouldn't be a problem removing the rocktoy ring, ill just mount it using ben t transfer arms.
|
|
|
|
 |
Rossco
Joined: Fri May 28, 2010 10:28 am Posts: 529 Location: Townsville, QLD
Vehicle: 91 WT 1.6EFI
|
 Posted: Sun Nov 17, 2013 6:15 pm |
|
|
|
 |
|