| Author |
Message |
billythunder
Joined: Sun Mar 24, 2013 7:36 pm Posts: 47 Location: Brownsville
Vehicle: 98 jimny awning bar and lights
|
 Posted: Sat Nov 23, 2013 12:44 pm |
|
Hey all I was out wheeling and the steering went on left side for some reason took to mate who is mechanic for army he said that might be steering box any thoughts turns full lock to right but only half turn of wheel to right any help would be greatly appreciated thanks 
|
|
|
|
 |
vit1990
Joined: Tue Jul 23, 2013 9:53 am Posts: 52
Vehicle: vit1990
|
 Posted: Sat Nov 23, 2013 12:52 pm |
|
|
It's possible that the steering shaft spline has slipped and jumped a spline on the box input. I've seen this before on a Sierra.
|
|
|
|
 |
shep
Joined: Thu Mar 29, 2007 11:30 pm Posts: 14498 Location: Here there everywhere
Vehicle: A manly awesome man jimny
|
 Posted: Sat Nov 23, 2013 1:06 pm |
|
|
Does it have a steering dampner ?
_________________ JEEPJEEPJEEPJEEPJEEPJEEPJEEPJEEPJEEP
|
|
|
|
 |
zooky08

az supporter
Joined: Fri Nov 27, 2009 10:30 pm Posts: 3426 Location: imbil/gympie. qld
Vehicle: 03 Jimny
|
 Posted: Sat Nov 23, 2013 1:08 pm |
|
|
Check your left side cv.
_________________ 03 Jimny 30 km2s 75mm lift f&r locked winch
|
|
|
|
 |
steve

I live here!
Joined: Sun Jun 11, 2006 11:30 pm Posts: 7681 Location: Brisbane
Vehicle: 75 Cruiser
|
 Posted: Sat Nov 23, 2013 1:26 pm |
|
|
Bent rod?
either steering rod or panhard rod.
|
|
|
|
 |
kenn
Joined: Tue Nov 11, 2008 10:30 pm Posts: 1202 Location: Melbourne
|
 Posted: Sun Nov 24, 2013 6:32 am |
|
|
|
 |
Scrawny

I live here!
Joined: Tue Jan 29, 2008 10:30 pm Posts: 10528 Location: Brissie
Vehicle: Popemobile
|
 Posted: Sun Nov 24, 2013 6:55 am |
|
|
|
 |
kenn
Joined: Tue Nov 11, 2008 10:30 pm Posts: 1202 Location: Melbourne
|
 Posted: Sun Nov 24, 2013 7:18 am |
|
|
|
 |
billythunder
Joined: Sun Mar 24, 2013 7:36 pm Posts: 47 Location: Brownsville
Vehicle: 98 jimny awning bar and lights
|
 Posted: Sun Nov 24, 2013 9:08 am |
|
|
Cheers for replays guys I'm a little bit mechanically challenged so forgive me if this sounds dumb. If it is cv will it only make clicking sound in 4x4 no sound when hubs are freewheeling
|
|
|
|
 |
31zook
Joined: Tue Mar 24, 2009 10:30 pm Posts: 9242 Location: maito
Vehicle: <3 Edna <3
|
 Posted: Sun Nov 24, 2013 9:55 am |
|
|
Only if its worn, if its busted it will make very little sound and be super clunky....
|
|
|
|
 |
scrubby

az supporter
Joined: Thu Oct 06, 2011 1:11 am Posts: 62 Location: Woodburn
|
 Posted: Mon Nov 25, 2013 7:58 am |
|
|
had this problem before mine was bent steering dampner
|
|
|
|
 |
billythunder
Joined: Sun Mar 24, 2013 7:36 pm Posts: 47 Location: Brownsville
Vehicle: 98 jimny awning bar and lights
|
 Posted: Wed Apr 09, 2014 11:13 pm |
|
|
Found the problem
You do not have the required permissions to view the files attached to this post.
|
|
|
|
 |
Jbjimny

newbie
Joined: Mon Feb 08, 2016 5:28 am Posts: 2
Vehicle: Suzuki Jimny
|
 Posted: Mon Feb 08, 2016 4:07 pm |
|
|
Hi, I have the same problem but turning to the right is the issue. I can only get half a turn on the steering wheel right, but a full lock left.
What was the problem?
CV joint? Bearings?
King pins?
I don't know where to start looking.
Thanks for any help
|
|
|
|
 |
watermouse

az supporter
Joined: Wed Nov 18, 2009 10:30 pm Posts: 868
Vehicle: zook
|
 Posted: Mon Feb 08, 2016 8:37 pm |
|
Jbjimny wrote: What was the problem?
looks like from the photo above it was CV joint Quote: I don't know where to start looking.
probably inside the steering knuckle. Awesome fun!. Quote: Thanks for any help you're welcome
|
|
|
|
 |
Jbjimny

newbie
Joined: Mon Feb 08, 2016 5:28 am Posts: 2
Vehicle: Suzuki Jimny
|
 Posted: Tue Feb 16, 2016 8:13 am |
|
Thanks for the reply Watermouse. Your right. It was the cv joint. My cage had completely shattered. I would upload a picture but I'm not sure how  (on iPhone) Thanks again
|
|
|
|
 |
striker99
Joined: Tue Jul 30, 2013 6:13 pm Posts: 269
Vehicle: Suzuki Jimny 2013
|
 Posted: Fri Feb 19, 2016 11:35 am |
|
|
I had a similar steering problem ok the Jimny up until a week ah, pulled the steering dampener and it's fixed now. My wheel allignment is now out again which sucks...
|
|
|
|
 |
Jimny_No_Power
Joined: Mon May 25, 2015 6:25 pm Posts: 84
Vehicle: 2001 M15A Jimny
|
 Posted: Fri Feb 19, 2016 5:21 pm |
|
|
Shit! That's a failure and then some. Glad you worked it out, nicely done.
|
|
|
|
 |
|