[zedboy]

Hi Guys

Need to replace this soon checked Exedy's clutch finder and came back with the following two options for the input shaft spline.

Flywheel Profile -2.1mm
Size 190
Spline OD 22.4
No. of Teeth 20

Flywheel Profile Flat
Size 190
Spline OD 19.1
No. of Teeth 18

Clutch industries only had one option for the sierra under SJ413
Clutch plate dimensions (mm): 190 x 20T x 22.8

So which one is correct? From What I can find is 84-90 and 97-99 use the same clutch but can't find any confirmation for my 92.

Thanks
Guys

[zedboy]

Anyone at all know???

zedboy wrote:

Hi Guys

Need to replace this soon checked Exedy's clutch finder and came back with the following two options for the input shaft spline.

Flywheel Profile -2.1mm
Size 190
Spline OD 22.4
No. of Teeth 20

Flywheel Profile Flat
Size 190
Spline OD 19.1
No. of Teeth 18

Clutch industries only had one option for the sierra under SJ413
Clutch plate dimensions (mm): 190 x 20T x 22.8

So which one is correct? From What I can find is 84-90 and 97-99 use the same clutch but can't find any confirmation for my 92.

Thanks
Guys

[alien]

mine's a 92 and it takes the same clutch as a jimny, try a search for jimny and it should match one of the above part numbers.

[coily96]

Ive always used the SZK6474 (20 teeth) 96 coil model g13ba

From clutch industries

[jono165]

My sierra is a 92 and it has a stepped flywheel.