[zooky08]

Does anyone no the length of a g16b with a auto and transfer case adapted to it is.from crank pully to output of a vitara tc. Cheers

[zooky08]

Anyone know? or know we're I could find any info.

[tanshi]

so you want a length of a g16, autobox with a sierra transfer case?

[tanshi]

or standard vitara measurment

[Teracis]

Looks like he wants from the front of the vitara auto gearbox all the way through to the rear of a vitara transfer case.

If you let everyone know what you're trying to achieve with this information we can probably also point you in the direction of some useful information.

[chris77]

Best I can do is a G16a 16v with AW4 auto , from dual front crank pulley to rear output is 1470mm .

Cheers
Chris

[zooky08]

I thought it was clear in my first post. Roughly how long is it from front of the g16b to the output of the vitara transfer case. . So that g16b engine, aw4 auto and vitara transfer case.

I would like a rough measurement so I know we're to position it on a chassis I have made.

[Blkfxx]

zooky08 wrote:

I thought it was clear in my first post.

Your first post used this word..

zooky08 wrote:

Does anyone no the length of a g16b with a auto and transfer case adapted to it is.from crank pully to output of a vitara tc. Cheers

Which is why I am guessing people were confused.

[zooky08]

My bad

[zooky08]

chris77 wrote:

Best I can do is a G16a 16v with AW4 auto , from dual front crank pulley to rear output is 1470mm .

Cheers
Chris

That's just aw4? No tc?

[chris77]

Including the t/c as requested , just happen to have one sitting in the shed and it was even accessible .

[zooky08]

Sweet thanks mate