hey guys ive got a project 1981 or 82 stockman ute and a sh** tone of parts that im selling as time and cashflow has become an issue.
im located on the north side of brisbane in lutwyche 4030. best contact number is 0416880027, feel free to call or txt at any resonable hour.
this list is as follows:
1981 or 82 1.0L lwb tray back ute. with WT nose cone with 1.0L grill and 1.0L steel dash and gauge cluster. it has No front diff, motor, gearbox, fuel tank (more or less just shell and chassis) comes with steel tray also if wanted.
Asking price: ($ 1250) price drop $1000 negotiable
Wt 1.3 sierra f+r diffs complete (no breaks), front has new axels, swivel hub rebuild,new wheel bearings, knuckle gussets and bracing welded on,strong open centre, and free wheeling hubs
asking price: ($175) now $150
Rear is a minispooled 1.3 wt unsure of axel condition, but looks to be in good shape.
asking price: $125 or $250 for the pair.
Set of 4 sava rv 31x10.5r15 on vitara alloys and spare 31x10.5r15 bridgestone spare on random rim, tires are still good for beach use but there pretty well f**ked
Asking price: $400 for all 5
brand new jeep yj wrangler leaf springs rear pair only with old man emu bushes (great for getting the rear flexing)
asking price: $300 neg
Suzuki swift GTI Mk1 1.3 twin cam matched up to a sierra 1.3 flywheel clutch and strong 5 speed(cant remember the condition of the clutch), complete dash loom and engine wiring harness, all bolt ons fitted also. i bought the gti as a whole running car and took the motor out i believe the km were around the 220,000 mark but i am unsure. i do aslo have 1.3L chassis engine mounts to suit weld onto a 1.0L chassis if wanted.
asking price $650
Suzisport built F10a 5speed made from 3 gearboxes(not sure which ons though) cost me $1200 a couple of years ago and ran it for a year befor i let my tin top run out of rego and has been collecting dust since, comes with jackshaft to suit but a crossmember mount will have to be fabricated for it to bolt in.
asking price: sold
1.0L NT rear diff center only with an autolocker, unsure of brand and has some backlash, but it does the job.
Asking price: $75
low range offroad tube frame doors and latches.
Asking price: sold
1.0L drivers side green door, no internal lining or window reg fitted but does come with new window reg and glass ( I only have the one door )
asking price: $50
1.0L transfer case, gears work but have some play be good for a spare( its not the switched type)
asking price $40
i think that is all the big stuff, i do have a random assorment of interior parts and and bits and bobs so feel free to ask.
prices are slightly negotiable so hit me up and the worst i can say is no. there is photos of all the parts and they can be found at
http://www.benjiwilton.tumblr.com Happy hunting guys.
cheers benji.
for a fast response txt or call me otherwise ill probably check AZ once a day.
