[zukenutter]

I have two near new coil packs on my old 1.3 that's sitting under the house. My 1.8 is experiencing a dead spot on gentle take offs after idling for a couple of minutes and I want to try swapping the coils. OEM coil packs between the two engines have a different part number but externally look the same. Does anybody know if they're actually different or where I could find specs on both?

[MrRocky]

Ive been told they are the same even on the g series motors

[Davesrt]

Hi zukenutter,

I ran the standard jimny coils and leads for about a month after I did my conversion. I've since changed to the 1.8 liana coils and they have been in the car for over 3 months now. I noticed no difference between them. I changed because the liana ones were only recently replaced when I bought my liana to use for the conversion and I had driven the liana and knew it was all good.

Dave

[zukenutter]

Thanks Dave. I wonder why they have different part numbers. I'll swap they and see how it goes.

In the meantime if anybody knows of any difference, e.g.; output etc. please let me know.

[squibby]

Yes they are

[losfer]

Think you will find the only difference is in the design of the "probe"

[zukenutter]

Cheers guys.
Losfer, by probe do you mean the lead that comes directly off the bottom of the coil?

[losfer]

Yes

[zukenutter]

I didn't pay much attention to the probe but seemed the same, can't think of why it would be different though. What makes you think it would be different?… Not being a smart arse, just wondering.