auszookers.com • View topic - Brake master cylinder.

Board index » Talking About Stuff » Suzuki Talk

Brake master cylinder.

Page 1 of 1

[ 14 posts ]

Print view

Previous topic | Next topic

Author

Message

jazzziiiblack

Joined: Mon Sep 09, 2013 9:11 am
Posts: 48
Location: jervis bay
Vehicle: suzuki sierra '94 (sj70)

Posted: Wed Sep 24, 2014 10:20 am

Anyone had their break master cyclinder replaced?

just been to the mechanic and he said mines leaking so i need a new one,
i was looking on suzukistore and they have them for $249, my machanic said its going to be $450 even before fitting,
how does this sound to everyone?
a $200 jump seems a little extreme to me

anyone had one done?

sideways

az supporter

Joined: Fri Oct 29, 2010 1:53 pm
Posts: 5936
Location: Northcliffe, W.A.
Vehicle: LJs, Sierra, Jimny, Swift.

Posted: Wed Sep 24, 2014 11:30 am

jazzziiiblack wrote:

how does this sound to everyone?

It sounds like you need to find a different mechanic.

4WD_products sell them for $139.

jazzziiiblack

Joined: Mon Sep 09, 2013 9:11 am
Posts: 48
Location: jervis bay
Vehicle: suzuki sierra '94 (sj70)

Posted: Wed Sep 24, 2014 12:10 pm

cheers, have you bought one? are they good?

jazzziiiblack

Joined: Mon Sep 09, 2013 9:11 am
Posts: 48
Location: jervis bay
Vehicle: suzuki sierra '94 (sj70)

Posted: Wed Sep 24, 2014 12:12 pm

can you post the website link? i cant seem to find them

droverdave

Joined: Wed Dec 19, 2012 7:43 am
Posts: 685
Vehicle: 85 ' Drover

Posted: Wed Sep 24, 2014 12:33 pm

Ebay man.

jazzziiiblack

Joined: Mon Sep 09, 2013 9:11 am
Posts: 48
Location: jervis bay
Vehicle: suzuki sierra '94 (sj70)

Posted: Wed Sep 24, 2014 12:39 pm

have you bought one from there though? imjust a little worried about buying something that important of ebay

droverdave

Joined: Wed Dec 19, 2012 7:43 am
Posts: 685
Vehicle: 85 ' Drover

Posted: Wed Sep 24, 2014 12:44 pm

Well I bought some of their rear brake cylinders, and they seem to be ok.

If I personally needed a new master I would get my OEM one rebuilt. There is a mob near me who rebuilds them and replaces the insides with stainless steel. Its a bit more expensive ($250 i think a few yrs ago), but I had it done on my old corolla and worked good.

As for hours to put it in, I wouldnt expect a mechanic to take no more than 3hrs (3 x ~$90/hr = $270). Pluss some brake fluid...

jazzziiiblack

Joined: Mon Sep 09, 2013 9:11 am
Posts: 48
Location: jervis bay
Vehicle: suzuki sierra '94 (sj70)

Posted: Wed Sep 24, 2014 1:05 pm

yeh but i think the $450 was just part supply price, it would be fine if it was supply and fit but i dont think it was

got_bar_work

Joined: Sat May 15, 2010 8:30 pm
Posts: 2214
Location: Brisbane
Vehicle: SQ625

Posted: Wed Sep 24, 2014 1:13 pm

I wouldnt hesitate to buy suff off greg at 4wd products.

whincup

az supporter

Joined: Sat Apr 17, 2010 11:30 pm
Posts: 1588
Location: Gracemere, QLD
Vehicle: '94 suzuki maruti

Posted: Wed Sep 24, 2014 2:34 pm

I run a master cylinder from 4wd products. Not yet had a drama with it.

want33s

az supporter

Joined: Fri Nov 16, 2007 10:30 pm
Posts: 8134
Location: Sunshine Coast Qld

Posted: Wed Sep 24, 2014 5:23 pm

It shouldn't take any mechanic more than an hour to remove replace and bleed the system.
$250 fitted would be more than fair I'd say.

jazzziiiblack

Joined: Mon Sep 09, 2013 9:11 am
Posts: 48
Location: jervis bay
Vehicle: suzuki sierra '94 (sj70)

Posted: Thu Sep 25, 2014 9:07 am

dam so 4wd products dont have any in stock, anyone else bought from someone else?

droverdave

Joined: Wed Dec 19, 2012 7:43 am
Posts: 685
Vehicle: 85 ' Drover

Posted: Thu Sep 25, 2014 10:12 am

Try any parts shop? Repco? Bursons?

They are all going to supply an aftermarket item.

testos_tyrone

Joined: Mon Nov 28, 2011 10:08 am
Posts: 9
Location: Sydney

Posted: Sun Sep 28, 2014 2:16 pm

It's not uncommon to have steep price differences, a week a go at work we had a triton where between two different year models the price jumped 200 bucks, and they only had a different pipe fitting, and as it was said earlier 1 hour labour sounds about right

Page 1 of 1

[ 14 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: Google [Bot] and 85 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum