[strop]

hey every one

just a quick question im doing the wiring on a G16B conversion into a Suzuki for a mate and just have a question about he coil, its a dizzy model and i have found the wire from the ecu to the coil but on my drawings it has an ignitor before the coil, am i missing something?

thanks charlie

[strop]

what i should say is its the ignition trigger signal from the ecu i have but it goes to the ignitor which then goes to the ignition coil, i dont think i have the ignitor...

[monley]

If it's a late model vit motor it's all built into the dizzy/coil what ever you want to call it. I couldnt find any diagrams that showed it with out the ignitor either. So no your not missing anything

[strop]

It's a baleno motor, and it not all built in the dizzy, on my zook it is, was so much easier but an afternoon of prep we had it all done, I used a Vitara coil and ignitor and it worked on the baleno computer, only problem now is the timing on the dizzy.

Mate bought the zook half way through a conversion and they have retrofitted some cap off something else and it looks like an ugly setup but he might have to nut it out haha