It is currently Thu Jul 30, 2026 4:20 am
Board index » Talking About Stuff » Suzuki Talk



Post new topic Reply to topic  [ 5 posts ] 
Author Message

Offline

Joined: Tue Jul 30, 2013 6:13 pm
Posts: 269
Vehicle: Suzuki Jimny 2013

Post Posted: Sun Oct 19, 2014 5:52 pm 
Reply with quote Top  
Hey guys,

I bought a Primus IQ brake controller the other day from ebay and was just wondering if anyone has installed one of these in a Suzuki Jimny?

http://www.ebay.com.au/itm/290699466760 ... 1439.l2649

Is their already a harness installed behind the dash you can plug-and-play connect to, or do the connections have to be soldered?

I have a hayman reece towbar... When I installed it I seem to remember there being one loose wire on the back of the connector, which was presumably for the brakes?


Thanks guys

Matt.

 Profile  

Offline
I live here!
I live here!
User avatar

Joined: Tue Jan 29, 2008 10:30 pm
Posts: 10528
Location: Brissie
Vehicle: Popemobile

Post Posted: Sun Oct 19, 2014 7:54 pm 
Reply with quote Top  
You'll need to do all your own wiring. You'll need a 30A circuit breaker and decent size wire. Did it come with instructions? Yes, the left over wire should be blue and that's the one to connect to. What do you plan to tow btw?

 Profile  

Offline

Joined: Tue Jul 30, 2013 6:13 pm
Posts: 269
Vehicle: Suzuki Jimny 2013

Post Posted: Sun Oct 19, 2014 8:16 pm 
Reply with quote Top  
Ah well, I bought some 6mm twin core for doing the wiring on the trailer so should be able to use some of that for the car wiring... I haven't even received the unit yet tbh was just hoping to find out how difficult it would be beforehand/ what extra bits to go and buy :p

As far as towing goes, I have a poptop camper... its a bit heavy for the Jimny tbh... It sits somewhere around 500kg I believe... It isn't too bad towing at ~90-95km/h as long as the water tank is empty, but once you add the extra 60kg the weight really starts to add up....

 Profile  

Offline
Platinum Supporter
Platinum Supporter
User avatar

Joined: Tue Dec 06, 2011 9:30 am
Posts: 2155
Location: Nhulunbuy 0880
Vehicle: 2010 jimny

Post Posted: Mon Oct 20, 2014 7:38 am 
Reply with quote Top  
i ran my singal wire from the back of the car because i wisnt want to cut the wires near the break peddle.

30A self resetting breaker ext to the pos terminal, 6mm single blue to the trailer plug, 6mm from the trailer plug to the breaks.

check your earth between your trailer and your car. if using a tregg style hitch with a polly block then your chains are the only earthing convection and that can be dodge.
i put in a thick earth on a anderson plug so the breaks and aux power didnt melt the earth return in the 7 core trailer cables.

_________________
your daily dose of questionable sanity

 Profile WWW  

Offline
User avatar

Joined: Wed Sep 09, 2009 11:30 pm
Posts: 1522
Location: Brisbane
Vehicle: SJ80, SE416

Post Posted: Tue Oct 21, 2014 4:51 pm 
Reply with quote Top  
Use a large round trailer plug and socket rather than a standard one. A Narva one has 30A rated contacts as opposed to the standard 15A jobbies as well as the ability to accept 6mm automotive cable whereas a standard one won't. Do upgrade the earth on the car as well as most trailer sockets are wired back to a tiny taillight wire.

 Profile WWW  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

Jump to:  


Who is online

Users browsing this forum: No registered users and 525 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
Untitled Document


Untitled Document


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group :: Style based on FI Subice by phpBBservice.nl :: All times are UTC + 9:30 hours