It is currently Sat Jul 11, 2026 8:44 am
Board index » Shift It And Find It » Getting rid of stuff

Post new topic Reply to topic  Page 1 of 2
  [ 48 posts ]  Go to page 1, 2  Next

Print view

Previous topic | Next topic

Author Message
ozzycouch

Offline
User avatar

Joined: Sun Sep 18, 2011 11:23 pm
Posts: 256
Location: Maroochydore Sunny Coast
Vehicle: SWB Vit

Post Posted: Tue Sep 16, 2014 8:47 pm 
Reply with quote Top  
Few things for sale off a 98 Model Vitara:

Bar Treads x4 - they come on skinny 16inch rims, which after scraping off some of the hand brushed green are young roh rims.
Tires are 16, 7.00 which measure a bit over 30 inch. They are retreads, which when I got them had never been driven on.
I've probably put 100km on them over a weekend of driving around. Not bad at all on the road.
Probably suit an earlier model zuk better than mine :rofl: - SOLD

FlexyGlass hard top, front and rear sections with key and fittings - SOLD
Sliders, suit 1-2" Body lift (Shown on car with 1" body lift, just touching the sills) - SOLD
Rear third member, 12 bolt 5.12 with auto locker (type that uses side gears) - SOLD
Rear aluminium roll hoop, suits soft top only - SOLD
Bull Bar - Aluminium, bit of a shunt in the front - $150 ono
Also have one SWB Virara Soft top which I'm wrecking, if you want any other bits PM me, might have them.

Pick up from Sunshine Coast


Last edited by ozzycouch on Thu Jul 09, 2015 6:51 pm, edited 14 times in total.
 Profile  
Tezzazook89

Offline

Joined: Sat Mar 15, 2014 6:51 pm
Posts: 21
Vehicle: Vitara 1991

Post Posted: Wed Sep 17, 2014 6:23 am 
Reply with quote Top  
What else you sell
 Profile  
ozzycouch

Offline
User avatar

Joined: Sun Sep 18, 2011 11:23 pm
Posts: 256
Location: Maroochydore Sunny Coast
Vehicle: SWB Vit

Post Posted: Wed Sep 17, 2014 7:53 am 
Reply with quote Top  
Post up what you want, then I can tell you if I have it and want to sell it.
 Profile  
David-mohr122

Offline

Joined: Mon Mar 17, 2014 10:53 pm
Posts: 43
Vehicle: Suzuki vitara 94 g16a

Post Posted: Wed Sep 17, 2014 12:58 pm 
Reply with quote Top  
Bullbar ?
 Profile  
ozzycouch

Offline
User avatar

Joined: Sun Sep 18, 2011 11:23 pm
Posts: 256
Location: Maroochydore Sunny Coast
Vehicle: SWB Vit

Post Posted: Wed Sep 17, 2014 2:35 pm 
Reply with quote Top  
David-mohr122 wrote:
Bullbar ?


Bull Bar - Aluminium, bit of a shunt in the front

Image
Image
Image


Last edited by ozzycouch on Sun Sep 28, 2014 4:36 pm, edited 1 time in total.
 Profile  
David-mohr122

Offline

Joined: Mon Mar 17, 2014 10:53 pm
Posts: 43
Vehicle: Suzuki vitara 94 g16a

Post Posted: Wed Sep 17, 2014 2:38 pm 
Reply with quote Top  
Can that accept a winch ? Haha sorry
 Profile  
ozzycouch

Offline
User avatar

Joined: Sun Sep 18, 2011 11:23 pm
Posts: 256
Location: Maroochydore Sunny Coast
Vehicle: SWB Vit

Post Posted: Wed Sep 17, 2014 4:57 pm 
Reply with quote Top  
Yes it would fit, 160mm inside clearance.
I would recomend reinforcing the bars mounting points before using a winch on it though. Just my 2c
 Profile  
Tezzazook89

Offline

Joined: Sat Mar 15, 2014 6:51 pm
Posts: 21
Vehicle: Vitara 1991

Post Posted: Fri Sep 19, 2014 7:43 am 
Reply with quote Top  
Can you use the rock sliders with no body lift
 Profile  
ozzycouch

Offline
User avatar

Joined: Sun Sep 18, 2011 11:23 pm
Posts: 256
Location: Maroochydore Sunny Coast
Vehicle: SWB Vit

Post Posted: Fri Sep 19, 2014 9:37 am 
Reply with quote Top  
Tezzazook89 wrote:
Can you use the rock sliders with no body lift

Short answer, NO.
Long answer, take them down to your local exhaust/ engineering shop, get them to put a couple of small bends in the connecting pipe to drop them lower off the sills, YES.
 Profile  
Vitvitara

Offline

Joined: Fri Oct 03, 2014 7:40 pm
Posts: 5
Vehicle: 1997 Vitara

Post Posted: Tue Oct 28, 2014 9:44 am 
Reply with quote Top  
Hi, any of that stuff still for sale?
 Profile  
ozzycouch

Offline
User avatar

Joined: Sun Sep 18, 2011 11:23 pm
Posts: 256
Location: Maroochydore Sunny Coast
Vehicle: SWB Vit

Post Posted: Tue Oct 28, 2014 12:42 pm 
Reply with quote Top  
All but the sliders are still for sale, plenty of other stuff also.

And price drop on parts
 Profile  
Zuk_89

Offline

Joined: Sun Jan 13, 2013 8:01 pm
Posts: 176
Vehicle: Swb vitara

Post Posted: Wed Oct 29, 2014 2:50 pm 
Reply with quote Top  
How much for a shell with chassis?
 Profile  
ozzycouch

Offline
User avatar

Joined: Sun Sep 18, 2011 11:23 pm
Posts: 256
Location: Maroochydore Sunny Coast
Vehicle: SWB Vit

Post Posted: Wed Oct 29, 2014 9:15 pm 
Reply with quote Top  
Zuk_89 wrote:
How much for a shell with chassis?

$200, Would recommend you come and have a look at what's left though.
 Profile  
Lyndon84

Offline
newbie

Joined: Fri Jul 18, 2014 5:44 pm
Posts: 2
Vehicle: 89 lwb seirra

Post Posted: Thu Oct 30, 2014 9:15 pm 
Reply with quote Top  
Can see one is a manual any chance the other is a 3 speed auto?
 Profile  
ozzycouch

Offline
User avatar

Joined: Sun Sep 18, 2011 11:23 pm
Posts: 256
Location: Maroochydore Sunny Coast
Vehicle: SWB Vit

Post Posted: Thu Oct 30, 2014 9:39 pm 
Reply with quote Top  
Sorry, both manual.
 Profile  
shandy92

Offline
az supporter
az supporter
User avatar

Joined: Tue Nov 25, 2008 10:30 pm
Posts: 5066
Location: perth, Australia

Post Posted: Sat Nov 01, 2014 7:57 pm 
Reply with quote Top  
What condition are the gearbox's in? How many km?
 Profile  
ozzycouch

Offline
User avatar

Joined: Sun Sep 18, 2011 11:23 pm
Posts: 256
Location: Maroochydore Sunny Coast
Vehicle: SWB Vit

Post Posted: Sun Nov 02, 2014 4:05 pm 
Reply with quote Top  
All noisy in 5th, and most over 300,000 km on them.
 Profile  
shandy92

Offline
az supporter
az supporter
User avatar

Joined: Tue Nov 25, 2008 10:30 pm
Posts: 5066
Location: perth, Australia

Post Posted: Sun Nov 02, 2014 6:15 pm 
Reply with quote Top  
Ok, seems to be a common thing. Thanks
 Profile  
ozzycouch

Offline
User avatar

Joined: Sun Sep 18, 2011 11:23 pm
Posts: 256
Location: Maroochydore Sunny Coast
Vehicle: SWB Vit

Post Posted: Sun Nov 02, 2014 7:42 pm 
Reply with quote Top  
I'll post up when I pull one down, I'm sick of the noisy fifth as well!
I'm sure there will only be a couple of bearings to get it quiet again.
 Profile  
shandy92

Offline
az supporter
az supporter
User avatar

Joined: Tue Nov 25, 2008 10:30 pm
Posts: 5066
Location: perth, Australia

Post Posted: Sun Nov 02, 2014 9:30 pm 
Reply with quote Top  
Awesome, yep same as mine. I got 275k been a tiny bit whiney for the past 20k. If you could Let me know what you find that would be awesome.
 Profile  
vandle

Offline

Joined: Sun May 10, 2009 11:30 pm
Posts: 50
Location: Brisbane

Post Posted: Mon Nov 03, 2014 12:31 pm 
Reply with quote Top  
Hi

How much for the fibreglass top and rear

cheers
 Profile  
ozzycouch

Offline
User avatar

Joined: Sun Sep 18, 2011 11:23 pm
Posts: 256
Location: Maroochydore Sunny Coast
Vehicle: SWB Vit

Post Posted: Mon Nov 03, 2014 2:21 pm 
Reply with quote Top  
vandle wrote:
Hi
How much for the fibreglass top and rear
cheers

ozzycouch wrote:
FlexyGlass hard top, front and rear sections with key and fittings - $900 ono


However, always open to offers.
 Profile  
vandle

Offline

Joined: Sun May 10, 2009 11:30 pm
Posts: 50
Location: Brisbane

Post Posted: Mon Nov 03, 2014 8:35 pm 
Reply with quote Top  
You have PM
 Profile  
TahneeMaree

Offline
User avatar

Joined: Thu Oct 09, 2014 9:47 pm
Posts: 27
Vehicle: 2000 Grand Vitara 1.6L

Post Posted: Wed Nov 05, 2014 5:56 pm 
Reply with quote Top  
Hi. Do you think the bullbar would fit my 2000 model vitara?
What part of the sunny coast are you at?
Could drive up to see if it would fit.
 Profile  
ozzycouch

Offline
User avatar

Joined: Sun Sep 18, 2011 11:23 pm
Posts: 256
Location: Maroochydore Sunny Coast
Vehicle: SWB Vit

Post Posted: Wed Nov 05, 2014 8:06 pm 
Reply with quote Top  
Pretty sure your chassis is wider than the car it came off, so it won't fit without modifications.
 Profile  
brchalta

Offline

Joined: Wed Jul 10, 2013 10:48 am
Posts: 91
Vehicle: 1992 suzuki vitara

Post Posted: Fri Nov 21, 2014 9:57 pm 
Reply with quote Top  
Hi do have locking hubs for a 1992 swb vitara.
 Profile  
ozzycouch

Offline
User avatar

Joined: Sun Sep 18, 2011 11:23 pm
Posts: 256
Location: Maroochydore Sunny Coast
Vehicle: SWB Vit

Post Posted: Mon Nov 24, 2014 7:24 am 
Reply with quote Top  
brchalta wrote:
Hi do have locking hubs for a 1992 swb vitara.


Yep, got a pair here for $80
 Profile  
ozzycouch

Offline
User avatar

Joined: Sun Sep 18, 2011 11:23 pm
Posts: 256
Location: Maroochydore Sunny Coast
Vehicle: SWB Vit

Post Posted: Mon Dec 08, 2014 10:23 am 
Reply with quote Top  
Bump - Bar Treads Added
 Profile  
rockcrawlerdude

Offline
User avatar

Joined: Thu Apr 05, 2012 7:30 pm
Posts: 298
Vehicle: 1985 LWB sierra

Post Posted: Mon Dec 08, 2014 10:53 am 
Reply with quote Top  
Still have the roll hoop?
 Profile  
ozzycouch

Offline
User avatar

Joined: Sun Sep 18, 2011 11:23 pm
Posts: 256
Location: Maroochydore Sunny Coast
Vehicle: SWB Vit

Post Posted: Mon Dec 08, 2014 12:18 pm 
Reply with quote Top  
rockcrawlerdude wrote:
Still have the roll hoop?


Sure do $50.00 if you buy it this week.
 Profile  
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 2
  [ 48 posts ]  Go to page 1, 2  Next

Jump to:  


Who is online

Users browsing this forum: No registered users and 20 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
Untitled Document


Untitled Document


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group :: Style based on FI Subice by phpBBservice.nl :: All times are UTC + 9:30 hours

Advertisements by Advertisement Management

Advertisements by Advertisement Management