[Hybrid]

Hi,

Do I need to cut down the standard AC compressor bracket to fit the PS pump bracket? I can't see any way of doing it. The original AC bracket runs an idler pulley which appears to clash with the PS pump bracket.

Cheers,

John

[Hybrid]

Ok so I found a picture of this Liana AC bracket (top pic). Comparing it to the bracket from the JX I'm working on (bottom pic) it looks like I can't even cut the existing bracket down. The proper bracket actually lowers the AC pump about an inch to clear the PS pump bracket. It's a bit of a trap for people looking to add PS to their JX Jimny. At least for the early M13a models. Not sure if the later ones come with the right bracket.