auszookers.com • View topic

Board index » Talking About Stuff » Suzuki Talk

Timing Marks

Page 1 of 1

[ 9 posts ]

Print view

Previous topic | Next topic

Author

Message

Hairy

Joined: Sat Sep 06, 2014 1:58 pm
Posts: 48
Vehicle: 1997 Sierra Convertible

Posted: Sun Dec 28, 2014 5:37 pm

Gday,
While checking the timing on my G13ba, my son and I come up with two completely different readings?????
The problem was, he was sighting from the top of the engine straight down and I was looking through the centre of the timing marks to the centre of the crank?
The timing marks are not straight on top of the crank pulley, but off to one side......about 11o'clock, so I assumed you need to sight from that angle, not straight over the top????
Can anyone tell me what is the correct angle as it makes a few degrees difference.
I can do a drawing if it explains it better.......
Cheers

Blkfxx

az supporter

Joined: Sat Feb 04, 2012 7:11 pm
Posts: 1105
Location: Oberon, NSW
Vehicle: Drover pickup turk

Posted: Sun Dec 28, 2014 5:40 pm

Looking front on, the marks on the pulley/timing gear point to the marks on the block/head

_________________

Quote:

I like the tuna here

Hairy

Joined: Sat Sep 06, 2014 1:58 pm
Posts: 48
Vehicle: 1997 Sierra Convertible

Posted: Sun Dec 28, 2014 7:59 pm

Blkfxx wrote:

Looking front on, the marks on the pulley/timing gear point to the marks on the block/head

Ill see if I can upload a drawing to explain myself better......

Hairy

Joined: Sat Sep 06, 2014 1:58 pm
Posts: 48
Vehicle: 1997 Sierra Convertible

Posted: Sun Dec 28, 2014 8:05 pm

Hairy

Joined: Sat Sep 06, 2014 1:58 pm
Posts: 48
Vehicle: 1997 Sierra Convertible

Posted: Sun Dec 28, 2014 8:06 pm

Should I be sighting along line A or B? It makes a couple of degrees difference?

Hairy wrote:

Blkfxx

az supporter

Joined: Sat Feb 04, 2012 7:11 pm
Posts: 1105
Location: Oberon, NSW
Vehicle: Drover pickup turk

Posted: Sun Dec 28, 2014 8:43 pm

A. same as looking front on.

_________________

Quote:

I like the tuna here

Hairy

Joined: Sat Sep 06, 2014 1:58 pm
Posts: 48
Vehicle: 1997 Sierra Convertible

Posted: Sun Dec 28, 2014 8:49 pm

Blkfxx wrote:

A. same as looking front on.

Cheers....that's what I thought

AckerDackerly

az supporter

Joined: Thu Jun 02, 2011 9:53 pm
Posts: 361
Location: Independence, MO USA
Vehicle: 1993 RHD Suzuki Escudo Tintop

Posted: Mon Dec 29, 2014 4:10 pm

Also - isn't there a port on the transmission housing on the exhaust side where you can see markings on the flywheel?

...or is this just on the SJ413 5-speed transmission...

Just curious - we don't have the cool stuff you have here in the Colonies...

_________________
-Ack
http://www.acksfaq.com
88, 88.5 SJ413

Blkfxx

az supporter

Joined: Sat Feb 04, 2012 7:11 pm
Posts: 1105
Location: Oberon, NSW
Vehicle: Drover pickup turk

Posted: Mon Dec 29, 2014 4:35 pm

AckerDackerly wrote:

Also - isn't there a port on the transmission housing on the exhaust side where you can see markings on the flywheel?

That was found on earlier models, what we call Narrow Tracks with the g13a

_________________

Quote:

I like the tuna here

Page 1 of 1

[ 9 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: No registered users and 601 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum