It is currently Wed Jul 29, 2026 5:41 am
Board index » Talking About Stuff » Suzuki Talk



Post new topic Reply to topic  [ 12 posts ] 
Author Message

Offline
User avatar

Joined: Thu Dec 17, 2009 10:30 pm
Posts: 4731
Location: perth

Post Posted: Fri Jan 30, 2015 10:47 pm 
Reply with quote Top  
Now ive done ruf a few times now and expected have to redrill the rear spring mount 30mm or so to accomodate the longer spring to prevent the shackles flipping up under compression but this was not the case. I have a shackle angle of 45* or so and no issues under flex ramp conditions.
Now it was a factory suzuki leaf pack but shorter by a little compared to all the others i have used ????
Anyone else experianced this before ?

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Sun Aug 16, 2009 11:30 pm
Posts: 1409
Location: Newcastle NSW
Vehicle: '96 LWB trayback

Post Posted: Fri Jan 30, 2015 11:17 pm 
Reply with quote Top  
My maruti rears were 20mm shorter than wt factory rears.
Caused grief when I set the front up for run using rear spring spacings. Shorter springs and a heavier front end killed the shackle angle.

_________________
Twin charged twin cam twin locked webwheeler

 Profile  

Offline
User avatar

Joined: Thu Dec 17, 2009 10:30 pm
Posts: 4731
Location: perth

Post Posted: Fri Jan 30, 2015 11:50 pm 
Reply with quote Top  
Very odd just meant it bolted in and was kind of perfect ???
Previously had to redrill hangers to stuff around getting shackle angle right

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Fri Nov 16, 2007 10:30 pm
Posts: 8134
Location: Sunshine Coast Qld

Post Posted: Sat Jan 31, 2015 7:05 am 
Reply with quote Top  
Could they be rear springs from a Carry?

 Profile  

Offline
User avatar

Joined: Thu Dec 17, 2009 10:30 pm
Posts: 4731
Location: perth

Post Posted: Sat Jan 31, 2015 8:14 am 
Reply with quote Top  
No they are definately sierra, they could be maruti lwb ?
ive put them in my maruti front god knows what those crazy indians could have done haha might be my car thats oddball

 Profile  

Offline
User avatar

Joined: Wed Mar 24, 2010 10:30 pm
Posts: 16343
Location: Perth
Vehicle: '92 Sierra, 1.6efi, SPOA, 31s.

Post Posted: Sat Jan 31, 2015 10:06 am 
Reply with quote Top  
Imagine how much spring steel they'd save over a production run!

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Fri Feb 04, 2011 10:55 pm
Posts: 9348
Location: Newcastle
Vehicle: G13BB Jimny

Post Posted: Sat Jan 31, 2015 3:33 pm 
Reply with quote Top  
My blue pacs didn't need really need an extension with 95mm shackles.

_________________
mlm

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Fri May 15, 2009 11:30 pm
Posts: 2108
Location: western vic
Vehicle: sj51

Post Posted: Sat Jan 31, 2015 5:19 pm 
Reply with quote Top  
Arnt lwb rears shorter to give a taller shackle angle for better load carrying ability?

_________________
I'm back..... Again

 Profile  

Offline
User avatar

Joined: Wed Feb 06, 2013 8:24 pm
Posts: 1574
Vehicle: 91 Tin Top

Post Posted: Tue Feb 03, 2015 9:01 am 
Reply with quote Top  
^ Good theory there Pezz, don't know if it's right or not, but still a good theory. :)

 Profile  

Offline
User avatar

Joined: Tue Aug 16, 2011 1:45 am
Posts: 327
Vehicle: Tin Top

Post Posted: Wed Feb 04, 2015 8:17 am 
Reply with quote Top  
Have never done a RUF, what springs do people use?
If I have lifted springs, do I use lifted rears? or are OME rears same height?
Do I just mix and match or is there a rule of thumb involved?
Any help appreciated :)

 Profile  

Offline
User avatar

Joined: Thu Dec 17, 2009 10:30 pm
Posts: 4731
Location: perth

Post Posted: Wed Feb 04, 2015 9:41 am 
Reply with quote Top  
Lifted springs will require chassis extension or rear hanger relocation.
With standard rears you can just redrill the rear spring hanger or in my case get lucky and need no mods at all.
I normally just use the top spring for length as good cond stock rears are pretty old and hard to find. I mix and match a lifted front pack with stock rears

 Profile  

Offline

Joined: Thu Sep 01, 2011 11:48 pm
Posts: 814
Location: kinglake, VIC

Post Posted: Wed Feb 04, 2015 8:49 pm 
Reply with quote Top  
I just put stock rears in the front of mine and with 2inch ext shackles they are perfect no changes. The shackle angle is pretty flat but good for my intended use.

I dont know what they came out of though just know they are stock sierra springs. Sometimes you get lucky haha

 Profile  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 12 posts ] 

Jump to:  


Who is online

Users browsing this forum: No registered users and 65 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
Untitled Document


Untitled Document


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group :: Style based on FI Subice by phpBBservice.nl :: All times are UTC + 9:30 hours