| Author |
Message |
Mitchie.1
Joined: Fri Mar 09, 2012 7:54 pm Posts: 89 Location: Toowoomba
Vehicle: A shed full of pieces so far
|
 Posted: Sun Feb 15, 2015 9:30 pm |
|
|
G16b with aw4 auto with loom and computers, shifter, vitara dash cluster, viscous fan, sierra sump and oil pick up, extractors and in tank fuel pump. The following are new parts. Some have been fitted. Trail tough auto to sierra adaptor kit including bolt in crossmember, un breakable trans mount and preformed weld in plates to widen the trans tunnel. The bush and seal has been installed to the output of the transmission to take a shortened sierra jack shaft (not included) Trail tough unbreakable engine mounts. Spal thermo fan Vitara radiator Vitara throttle cable Exhaust gsk Oil cap Sump gsk Custom 1 Litre swirl pot VL efi fuel pump Facet lift pump
The loom has been partially stripped out but still includes the vitara dash.
This is pretty much everything needed to fit a g16b auto into a sierra.
$1800Ono
Located toowoomba qld
Last edited by Mitchie.1 on Fri Apr 10, 2015 3:08 pm, edited 2 times in total.
|
|
|
|
 |
Mitchie.1
Joined: Fri Mar 09, 2012 7:54 pm Posts: 89 Location: Toowoomba
Vehicle: A shed full of pieces so far
|
 Posted: Tue Feb 17, 2015 8:26 am |
|
|
|
 |
Don Burtron
Joined: Wed Feb 04, 2015 8:24 pm Posts: 27
Vehicle: 97 Sierra
|
 Posted: Thu Feb 19, 2015 9:08 pm |
|
|
Will you sell them engine only.. If do how much?
|
|
|
|
 |
rwt65
Joined: Tue Aug 16, 2011 1:45 am Posts: 327
Vehicle: Tin Top
|
 Posted: Fri Feb 20, 2015 6:35 am |
|
|
Preformed weld in plates for the transmission tunnel, would you sell them seperate and or where did you get them?
|
|
|
|
 |
jdk81
Joined: Sat Jul 18, 2009 11:30 pm Posts: 2372 Location: Ballarat, VIC
|
 Posted: Fri Feb 20, 2015 7:38 am |
|
|
Trail tough sell them as part of the auto install kit. LROR sell them too
I Wouldn't think separating the kit would be wise
|
|
|
|
 |
Mitchie.1
Joined: Fri Mar 09, 2012 7:54 pm Posts: 89 Location: Toowoomba
Vehicle: A shed full of pieces so far
|
 Posted: Fri Feb 20, 2015 9:43 pm |
|
|
Yeah the panels come with the auto kit. I'd rather not part it out at this point. It took a long time to gather all this stuff.
|
|
|
|
 |
Cambell
Joined: Wed Dec 11, 2013 5:21 pm Posts: 15
Vehicle: 1999 jimny
|
 Posted: Fri Feb 27, 2015 2:41 pm |
|
|
I will take the aw4 transmission, trans computer, torque converter and flex plate if you want to split it up.
|
|
|
|
 |
Mitchie.1
Joined: Fri Mar 09, 2012 7:54 pm Posts: 89 Location: Toowoomba
Vehicle: A shed full of pieces so far
|
 Posted: Tue Mar 03, 2015 7:36 am |
|
|
|
 |
Mitchie.1
Joined: Fri Mar 09, 2012 7:54 pm Posts: 89 Location: Toowoomba
Vehicle: A shed full of pieces so far
|
 Posted: Fri Apr 10, 2015 3:18 pm |
|
|
Price drop. Will consider splitting it up. Also have a bolt on pan hard kit for spoa sierra. $250
|
|
|
|
 |
rwt65
Joined: Tue Aug 16, 2011 1:45 am Posts: 327
Vehicle: Tin Top
|
 Posted: Fri Apr 10, 2015 9:16 pm |
|
|
Price on Trail Tough Auto adaptor kit if you seperate ?
|
|
|
|
 |
Mitchie.1
Joined: Fri Mar 09, 2012 7:54 pm Posts: 89 Location: Toowoomba
Vehicle: A shed full of pieces so far
|
 Posted: Sat Apr 11, 2015 10:13 am |
|
rwt65 wrote: Price on Trail Tough Auto adaptor kit if you seperate ? $150. It won't have the rear bush or seal for the trans as its already installed and I don't want to risk damaging it
|
|
|
|
 |
Scrawny

I live here!
Joined: Tue Jan 29, 2008 10:30 pm Posts: 10528 Location: Brissie
Vehicle: Popemobile
|
 Posted: Sat Apr 11, 2015 3:10 pm |
|
|
How much for auto and all associated parts for Sierra?
|
|
|
|
 |
Mitchie.1
Joined: Fri Mar 09, 2012 7:54 pm Posts: 89 Location: Toowoomba
Vehicle: A shed full of pieces so far
|
 Posted: Sun Apr 12, 2015 5:59 pm |
|
|
Auto is gone. Will get individual pics and prices up tomorrow night. Pm what bits you want.
|
|
|
|
 |
|