[Tonner]

Can someone put me onto a link to carryout an engine swap, G13BA in my SJ70 out and a G16A in its place ?? I have been looking for hours and cant find much apart from a lot of arguments and discussions about what's best as far which motors to fit.

I have a G16A already and just want a step by step on fitting it into the SJ7, and what else I need to get for the conversion ie adaptors etc.

thanks

[jdk81]

There's instructions in the BenT kit.

[Tonner]

for the whole job or just for fitting his kit?

[flymaster]

You'll need a Ben T kit, which has the gearbox/engine adapter plate and modified engine mount bracket. Have to modify the 1.3 oil pick up and use the 1.3 sump, the mods to the pick up are listed on Ben T instructions that come with adapter kit. Use the 1.3 flywheel, clutch and clutch bracket. May have clearance issues with the engine/bonnet and some fit 2inch body lift to clear it.
Nick

[Tonner]

Cheers Nick, that's exactly what I was after. The wiring is the same on both engines by what I have read, least I hope so anyway.