Board index » Talking About Stuff » Suzuki Talk
|
Page 1 of 1
|
[ 5 posts ] |
|
Print view
Previous topic | Next topic
| Author |
Message |
mrw82

az supporter
Joined: Tue Jul 03, 2007 11:30 pm Posts: 1350 Location: stuck in a hole. not off road, just deception bay.
Vehicle: snotbox, 84 LWB sierra 1 litre
|
 Posted: Tue May 05, 2015 7:37 pm |
|
|
Might be a silly question, but can a 1.3 clutch/flywheel be used in a vitara?
I know it can bolt up to the engine (as per a g16 into sierra conversion, to run the Sierra box), but unsure if the vitara gearbox would mate up to the G13 clutch. Can anyone confirm or deny?
Reason I ask is I might need to replace the clutch in a vitara, but it'll only have a short life 6-12 months max, before getting dropped into a sierra. Don't want to have to buy 2 clutches if one will do the job.
|
|
|
|
 |
Bulldog 61

az supporter
Joined: Tue Jan 20, 2015 9:15 am Posts: 145
Vehicle: SJ70 Tintop, SJ51T, 97 Coily
|
 Posted: Wed May 06, 2015 4:44 pm |
|
mrw82 wrote: Might be a silly question, but can a 1.3 clutch/flywheel be used in a vitara?
I know it can bolt up to the engine (as per a g16 into sierra conversion, to run the Sierra box), but unsure if the vitara gearbox would mate up to the G13 clutch. Can anyone confirm or deny?
Reason I ask is I might need to replace the clutch in a vitara, but it'll only have a short life 6-12 months max, before getting dropped into a sierra. Don't want to have to buy 2 clutches if one will do the job. Mate get onto Bretski on here, Im buying a 1.6 off him to do the swap and I don't need the clutch pressure plate or flywheel, if its ok might save you buying a new one.
|
|
|
|
 |
tanshi

az supporter
Joined: Tue Jan 09, 2007 10:30 pm Posts: 7717 Location: Brisbane
|
 Posted: Wed May 06, 2015 4:46 pm |
|
mrw82 wrote: Might be a silly question, but can a 1.3 clutch/flywheel be used in a vitara?
I know it can bolt up to the engine (as per a g16 into sierra conversion, to run the Sierra box), but unsure if the vitara gearbox would mate up to the G13 clutch. Can anyone confirm or deny?
Reason I ask is I might need to replace the clutch in a vitara, but it'll only have a short life 6-12 months max, before getting dropped into a sierra. Don't want to have to buy 2 clutches if one will do the job. ask Tim, there was a brand new clutch on the engine I just sold him that he wont be using
|
|
|
|
 |
Scrawny

I live here!
Joined: Tue Jan 29, 2008 10:30 pm Posts: 10528 Location: Brissie
Vehicle: Popemobile
|
 Posted: Wed May 06, 2015 6:15 pm |
|
|
Pretty sure input shafts are different. Exedy website should confirm that
|
|
|
|
 |
mrw82

az supporter
Joined: Tue Jul 03, 2007 11:30 pm Posts: 1350 Location: stuck in a hole. not off road, just deception bay.
Vehicle: snotbox, 84 LWB sierra 1 litre
|
 Posted: Wed May 06, 2015 8:08 pm |
|
tanshi wrote: mrw82 wrote: Might be a silly question, but can a 1.3 clutch/flywheel be used in a vitara?
I know it can bolt up to the engine (as per a g16 into sierra conversion, to run the Sierra box), but unsure if the vitara gearbox would mate up to the G13 clutch. Can anyone confirm or deny?
Reason I ask is I might need to replace the clutch in a vitara, but it'll only have a short life 6-12 months max, before getting dropped into a sierra. Don't want to have to buy 2 clutches if one will do the job. ask Tim, there was a brand new clutch on the engine I just sold him that he wont be using Already onto it. Thanks Darren. Keeps the vitara alive for a bit longer while it's needed. Now the fun job of installing it...
|
|
|
|
 |
|
|
Page 1 of 1
|
[ 5 posts ] |
|
Who is online
Users browsing this forum: Google [Bot] and 991 guests
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
Untitled Document
Untitled Document
|