auszookers.com • View topic - Jimny Transfer case

Board index » Talking About Stuff » Suzuki Talk

Jimny Transfer case

Page 1 of 1

[ 4 posts ]

Print view

Previous topic | Next topic

Author

Message

jimny_99

Joined: Wed Sep 02, 2009 11:30 pm
Posts: 3
Location: Canberra

Posted: Mon Sep 14, 2009 9:49 pm

hey guys
wen putting the jimny into 4wd or low range the light on the dash is meant to come on and stay solid, however mine just keeps flashing. as far as im aware the 4 wheels are still engaged and the low range still functions as normal. has any one else had this problem?
thanks

_________________
99 Jimny mods on the way!!!!1

steak_knife

az supporter

Joined: Fri May 22, 2009 11:30 pm
Posts: 21335
Location: Smart Ass Island

Posted: Mon Sep 14, 2009 11:17 pm

Sounds like a vacuum leak to the hub`s. check the hoses.
Also check that no wire`s have been damaged.

Steve

_________________
I used to be indecisive,
now I'm not so sure.....

steak_knife

az supporter

Joined: Fri May 22, 2009 11:30 pm
Posts: 21335
Location: Smart Ass Island

Posted: Mon Sep 14, 2009 11:18 pm

Wire`s to the T/case that is.....

_________________
I used to be indecisive,
now I'm not so sure.....

northernmenace

Joined: Sun Aug 23, 2009 11:30 pm
Posts: 3
Location: Cairns

Posted: Sun Sep 20, 2009 11:48 pm

I seem to remember reading somewhere about a diagnosis chart as to whats wrong if its flashing, have you checked out the manual, see if its in there in the troubleshooting area?

Page 1 of 1

[ 4 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: No registered users and 40 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum