[SurfyZook]

G'Day Zookers,

Looking at putting a newer set of front seats in my SJ70

After reading through some older post I see the swift gti seats fit right in no dramas

Just wondering if anyone has successfully fitting any other seats into a SJ70?

Jimny, Baleno, barinas, vitaras or any later models?

[andrew]

I put gti swift seats in mine... real easy.. i had to nut and bolt the rear of the seat where the rail bolts on as the stock rails were too short from memory.

[andrew]

Sorry didnt read ur post fully.
They didnt bolt straight in. I dont even know if your meant to muck around with mountings or modifying rails..

[SurfyZook]

Hey Andrew cheers mate

Yeah having a bit of trouble finding gti seats local to me so thought I would ask if anyone has mounted any other seats with ease

[Gwagensteve]

Technically any modification to seat mountings, rails etc needs engineer approval/mod plate, even if it's just drilling a hole.

Steve.

[andrew]

Gwagensteve wrote:

Technically any modification to seat mountings, rails etc needs engineer approval/mod plate, even if it's just drilling a hole.

Steve.

Lucky my mate does my blue slips

[Scrawny]

Any seat with 4x flat mounting points can be made to fit with a small amount of work. You just need to consider size as there's not too much room in a Sierra. Also height of base, as too high or low will make driving comfortably a pita