[watermouse]

The bulb shroud has snapped/dropped off and is rolling around inside . It's a sealed unit. I need a replacement.

Can anyone help a brother out?


Cheers.

[sezed]

Can you post a pic of the bit you need so I know what you mean, I have some spare headlights

[watermouse]

Thanks for the reply but I just bought a new headlight off ebay last night.

[Mugwui]

Just in case it happens again, you can peel these apart. I've opened these up myself.

[watermouse]

I just tried opening the old one up. There is no way it is coming apart without major damage to the back plastic flange. It is clipped together but with some very strong sealant.

At any rate, I would have needed a new shroud. The old one had snapped at the bend where the screw holds it on.

New one delivered from ebay for $155. Shiny!

[Mugwui]

You need to put it in the oven on 150 for 10 min, then pry it open with a small screwdriver or alike.

[watermouse]

Tricks of the trade! I'll keep that in mind.