auszookers.com • View topic - How do get anti theft bolts off from ignition barrel

Board index » Talking About Stuff » Suzuki Talk

How do get anti theft bolts off from ignition barrel

Page 1 of 1

[ 16 posts ]

Print view

Previous topic | Next topic

Author

Message

suzukikid

Joined: Sun Jan 14, 2007 10:30 pm
Posts: 2803
Location: Melton Victoria!

Posted: Thu Aug 20, 2015 6:13 am

As above what's the easiest way to get the anti theft bolts off from the bracket that holds the ignition barrel on?

Cheers

Scrawny

I live here!

Joined: Tue Jan 29, 2008 10:30 pm
Posts: 10528
Location: Brissie
Vehicle: Popemobile

Posted: Thu Aug 20, 2015 7:36 am

Hammer and cold chisel

tonyevans

az supporter

Joined: Sun Jan 16, 2011 11:18 pm
Posts: 1998
Location: Lightning Ridge NSW
Vehicle: SJ40 - LJ50 - LJ50V - Vitara

Posted: Thu Aug 20, 2015 8:24 am

^^^ That's how I got mine off

_________________
Old farts sometimes know some stuff you don't.

cairns27

Joined: Thu Dec 23, 2010 7:42 pm
Posts: 489
Location: Macleay Island
Vehicle: '95 Vitara JXI LWB G16B

Posted: Thu Aug 20, 2015 9:26 am

Ya didn't believe the key number is on the door lock?????

bye

AckerDackerly

az supporter

Joined: Thu Jun 02, 2011 9:53 pm
Posts: 361
Location: Independence, MO USA
Vehicle: 1993 RHD Suzuki Escudo Tintop

Posted: Thu Aug 20, 2015 9:40 am

cairns27 wrote:

Ya didn't believe the key number is on the door lock?????

bye

Point well taken!

...although I purchased a Maruti ignition switch and door lockset ($80 US from Roadless Gear) because the previous owner seemed to have a problem with the existing switch... he installed a starter button in the tintop, then threw away the keys!

_________________
-Ack
http://www.acksfaq.com
88, 88.5 SJ413

ozzycouch

Joined: Sun Sep 18, 2011 11:23 pm
Posts: 256
Location: Maroochydore Sunny Coast
Vehicle: SWB Vit

Posted: Thu Aug 20, 2015 10:23 am

Vice grips

tonyevans

az supporter

Joined: Sun Jan 16, 2011 11:18 pm
Posts: 1998
Location: Lightning Ridge NSW
Vehicle: SJ40 - LJ50 - LJ50V - Vitara

Posted: Thu Aug 20, 2015 11:26 am

ozzycouch wrote:

Vice grips

don't work as they are pyramid shape :wink:

_________________
Old farts sometimes know some stuff you don't.

ozzycouch

Joined: Sun Sep 18, 2011 11:23 pm
Posts: 256
Location: Maroochydore Sunny Coast
Vehicle: SWB Vit

Posted: Thu Aug 20, 2015 12:10 pm

tonyevans wrote:

don't work as they are pyramid shape :wink:

You can grab them at the base as the metal is quite soft :wink:

tonyevans

az supporter

Joined: Sun Jan 16, 2011 11:18 pm
Posts: 1998
Location: Lightning Ridge NSW
Vehicle: SJ40 - LJ50 - LJ50V - Vitara

Posted: Thu Aug 20, 2015 12:18 pm

not the ones I took out

_________________
Old farts sometimes know some stuff you don't.

suzukikid

Joined: Sun Jan 14, 2007 10:30 pm
Posts: 2803
Location: Melton Victoria!

Posted: Thu Aug 20, 2015 5:27 pm

I didn't have a number on the barrel....

cairns27

Joined: Thu Dec 23, 2010 7:42 pm
Posts: 489
Location: Macleay Island
Vehicle: '95 Vitara JXI LWB G16B

Posted: Thu Aug 20, 2015 5:55 pm

It's just 4 small digits..I bought a couple of wrecks without keys over the years, and always been able to get keys cut..maybe it's on the drivers side door lock??

bye

suzukikid

Joined: Sun Jan 14, 2007 10:30 pm
Posts: 2803
Location: Melton Victoria!

Posted: Thu Aug 20, 2015 9:41 pm

I have pmed you mate

suzukikid

Joined: Sun Jan 14, 2007 10:30 pm
Posts: 2803
Location: Melton Victoria!

Posted: Fri Aug 21, 2015 6:27 am

Vice grips worked awsome!!!! The top bolt was woeful had to rip the speedo out to get to it...

BAZZOOK

Joined: Sat Mar 24, 2007 10:30 pm
Posts: 1052
Location: MORNINGTON. VIC

Posted: Fri Aug 21, 2015 7:44 am

THERE'S ALSO A SPECIALIST LOCKSMITH TOOL SHAPED LIKED A SCREWDRIVER WITH A HARDENED BLADE FOR THOSE ANTI THEFT SCREWS FOR NUMBER PLATES..

4x4xzook

Joined: Wed May 16, 2012 8:41 am
Posts: 730
Location: Melbourne
Vehicle: MG410 Gypsy

Posted: Fri Aug 21, 2015 10:23 am

Vic grips worked a treat like nathan said... just a matter of getting it to the top bolt haha

frak

Joined: Wed Jun 24, 2015 11:02 pm
Posts: 252
Vehicle: Vitara 1.6

Posted: Mon Aug 24, 2015 8:32 am

+1 for the easy out bits.
1. Drill small hole
2. Cuck in the easy out withe the drill in reverse.

Sent from my SM-G900I using Tapatalk

Page 1 of 1

[ 16 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: No registered users and 324 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum